Where is the Buick's air filter located?

2 Answers
SanGiselle
07/23/25 8:19pm
The Buick's air filter is located behind the passenger glove box. The functions of the air filter are: 1. Provide fresh air; 2. Ensure safety and hygiene; 3. Absorb harmful substances; 4. Filter solid impurities. The steps to replace the air filter are: 1. Open the passenger glove box and you will find a cover plate; 2. Press the cover plate buckle inward with your hand to remove the cover plate, and you will see the internal air filter housing; 3. Remove the air filter housing and install the new air filter. Buick models include: Buick GL8, Buick Excelle, Buick Regal, Buick LaCrosse, Buick Envision, etc.
Was this review help?
12
5
Share
McFrank
08/10/25 6:21pm
I've been driving a Buick for several years and often change the air conditioning filter myself, which is located behind the glove compartment in front of the passenger seat. The method is quite simple: first, empty the glove compartment, locate the plastic clips on either side or at the bottom, gently press them to remove the glove compartment assembly, and then the filter housing will be exposed. Just pull open the cover and replace it with a new filter. Different Buick models like the Regal or GL8 have similar designs, making it easy to replace. It's recommended to change it every 15,000 kilometers or once a year; otherwise, dust and pollen buildup in the air can not only cause a musty smell when the AC is on but also increase the blower's load and shorten its lifespan. Especially for city driving, frequent replacement is advised, as filtering PM2.5 is particularly helpful for people with rhinitis, and doing it yourself saves on repair costs.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

Can Parking Lot Scratches Be Covered by Insurance?

Yes, it can be covered by insurance. If the car owner has purchased the additional coverage "Third Party Not Found Special Clause" under the car damage insurance, the insurance company will cover the full cost. If the incident occurs in a free parking lot, the parking lot will only be liable for compensation if there is intentional or gross negligence in vehicle storage damage; general scratches do not require them to take responsibility. After the incident, report the case within 48 hours, obtain an accident confirmation form from the traffic police, and then contact the insurance company for claims. Here is supplementary information about vehicle insurance: Vehicle insurance, also known as motor vehicle insurance or auto insurance, refers to a type of commercial insurance that covers personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Auto insurance is a type of property insurance. In the field of property insurance, auto insurance is a relatively young category, as it emerged and developed alongside the appearance and popularization of automobiles. Additionally, unlike modern motor vehicle insurance, early auto insurance primarily focused on third-party liability as the main coverage and gradually expanded to include risks such as collision damage to the vehicle body.
20
1
Share

When Should Spark Plugs Be Replaced?

Spark plugs need to be replaced under the following conditions: severe damage to the spark plug, such as blistering at the top, black streaks, cracks, or electrode melting. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its appearance to assess its condition. A normal spark plug will have a skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a skirt that is reddish-brown, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, with blistering, black streaks, cracks, or electrode melting at the top, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, or that engine oil is seeping into the combustion chamber.
7
2
Share

Is it harmful to turn off the engine directly when the car's water temperature is too high?

Turning off the engine directly when the car's water temperature is too high is a wrong behavior. When the car's water temperature is too high, first slow down, then pull over to the side of the road. Do not turn off the engine immediately, because excessively high water temperature will cause the piston, cylinder walls, cylinder, crankshaft, etc., to overheat, thinning the engine oil and losing its lubricating effect. If the engine is turned off immediately at this time, the mechanical parts are in an expanded state, and the gaps between various components are very small, which may cause some soft metals to peel off or even lead to cylinder sticking. Reasons for excessively high water temperature: 1. Insufficient coolant: First, check the coolant level. If you are on a highway or in a remote area and there is no coolant in the car, you can temporarily use water as a substitute. Note: Do not open the radiator cap or water tank cap immediately after stopping the car, as the internal pressure is too high, and opening it may cause instant spraying, which can easily lead to burns. 2. Dirty radiator: The radiator has many pores formed by cooling fins, which are prone to being clogged with fluff, sludge, etc., reducing ventilation and cooling efficiency. In winter, poor cooling efficiency is not a big problem because the ambient temperature is low. However, in summer, when the ambient temperature is already high, a clogged radiator with poor cooling can easily cause the water temperature to rise.
6
3
Share

What sedans does GAC Toyota have?

GAC Toyota's sedan lineup includes the Yaris L, Levin, and Camry. Below is more information about these three models: 1. The Toyota Yaris L is a compact sedan launched by Toyota, with body dimensions of 4440mm in length, 1700mm in width, and 1490mm in height, and a wheelbase of 2550mm. 2. The Levin is another compact sedan from Toyota, measuring 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. This model is equipped with two types of engines: a 1.8L naturally aspirated engine and a 1.2L turbocharged engine. 3. The Camry has body dimensions of 4885mm in length, 1840mm in width, and 1455mm in height. It comes with three engine options: the pure gasoline models are equipped with a 2.0L naturally aspirated engine and a 2.5L naturally aspirated engine, while the hybrid version features a 2.5L naturally aspirated engine paired with a 120-horsepower electric motor.
9
1
Share

What is the engine model of the Song Pro?

The BYD Song Pro is equipped with a turbocharged engine codenamed BYD476ZQB, which has a displacement of 1.5 liters. Here are some details about this engine: 1. This engine delivers a maximum horsepower of 160 HP, a maximum power output of 118 kW, and a maximum torque of 245 N·m. The peak power is achieved at 5,200 rpm, while the peak torque range is between 1,600 and 4,000 rpm. 2. It features direct fuel injection, with both the cylinder block and cylinder head made of aluminum alloy. Additional information: 1. Dimensions. The BYD Song Pro measures 4,650 mm in length, 1,860 mm in width, and 1,700 mm in height. In terms of power, the entire BYD Song Pro lineup is equipped with a 1.5-liter turbocharged engine producing a maximum horsepower of 160 HP. 2. Transmission. The entire BYD Song Pro lineup uses a 6-speed dual-clutch transmission. 3. Suspension. The front suspension of the BYD Song Pro is a MacPherson strut independent suspension, while the rear suspension is a multi-link independent suspension. 4. Drivetrain. The BYD Song Pro features front-engine, front-wheel drive.
8
5
Share

What is the Difference Between Mineral Oil and Semi-Synthetic Oil?

Mineral oil and semi-synthetic oil mainly differ in the following aspects: 1. Mineral oil is produced by refining petroleum into base oil and then adding additives; semi-synthetic oil is made by chemically synthesizing base oil and adding additives. 2. Although mineral oil is inexpensive, its service life and lubrication performance are inferior to semi-synthetic and synthetic oils, and it also causes significant environmental pollution. Semi-synthetic oil is a product refined from mineral oil through hydrocracking technology, with purity very close to that of full synthetic oil. Its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.