Where is the Buick Regal's Cabin Air Filter Located?

3 Answers
LeAriana
07/25/25 6:37am
The cabin air filter of the Buick Regal is located behind the glove compartment on the passenger side. The Buick Regal is a mid-sized 4-door 5-seater sedan with the following dimensions: length 4904mm, width 1863mm, height 1461mm, wheelbase 2829mm, and fuel tank capacity 55 liters. The Buick Regal is equipped with a 1.5T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 124 kW at 5600 rpm and a maximum torque of 250 N·m between 1700 to 4400 rpm. It features front-wheel drive, with MacPherson strut independent suspension at the front and multi-link independent suspension at the rear.
Was this review help?
11
2
Share
VonLily
08/11/25 1:11pm
The other day I helped a friend replace the AC filter on their Buick Regal, and the location is actually super simple—right behind the glove compartment on the passenger side. First, you need to open the glove box and carefully look for the plastic clips on both sides. Press them gently to remove the entire glove box, revealing a small rectangular filter housing. The cover usually has a sliding design; just twist it open to pull out the old filter and replace it with a new one. Remember to turn off the engine during the process to avoid accidental starts. The whole job takes about 5 minutes, but the filter should be replaced every 6 to 12 months. Otherwise, not only will dust accumulate, but it’ll also affect cooling efficiency, which is crucial for respiratory health. Personally, I recommend choosing a PM2.5-resistant filter—it makes a noticeable difference in air freshness, especially on highways. Also, Buick’s design is quite user-friendly; even beginners can handle it. Doing it yourself saves over 50 bucks in labor costs.
Was this review help?
20
1
Share
Expand All
PaulLee
09/27/25 5:37am
As a seasoned Buick driver, I've found that the cabin air filter is conveniently located behind the glove compartment on the passenger side. Simply open the glove box, remove the fixing clips on both sides, and you'll see the filter container, which features a drawer-style pull-out design. DIY replacement is super easy and takes less than 10 minutes. Checking it monthly prevents dust buildup and improves in-cabin air quality. The filters are affordable, available online for just tens of yuan. I always keep a spare handy to avoid wasting weekend time on replacements. The key is regular replacement – new cars might not need attention in the first year, but after frequent use, changing it every six months helps prevent AC system issues. With clean air, I don't worry about allergies when driving with my kids.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

Can motorcycles go on highways in Guangdong?

Motorcycles can go on highways in Guangdong, but they are not allowed to carry passengers. Legal basis: Article 27 of the "Guangdong Province Road Traffic Safety Regulations" states that vehicles should drive in their respective lanes as prescribed. Low-speed trucks, three-wheeled vehicles, tractors, and motorcycles should drive in the far-right lane. On highways and urban expressways with two lanes in the same direction, trucks are not allowed to enter the left lane except when overtaking. On roads with three or more lanes in the same direction, trucks are not allowed to enter the far-left lane. Roads with two or more motor vehicle lanes in the same direction may have dedicated lanes. Dedicated lanes can be designated for small passenger cars, buses, motorcycles, etc. Article 34 states that low-speed trucks, three-wheeled vehicles, and tractors are not allowed to enter highways or urban expressways, nor are they allowed to travel on roads in the central urban areas of large and medium-sized cities. Other roads restricting tractor traffic shall be designated by municipal governments at the prefecture level or above based on local conditions and reported to the provincial government for approval.
10
4
Share

What documents are required for motorcycle inspection?

Here are the materials required for motorcycle annual inspection: Copy of compulsory insurance: One of the preparations for vehicle inspection is to check the validity period of the compulsory insurance that includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance to avoid delaying the inspection. Documents: ID card of the owner or agent, original driving license, and road and bridge card. Legal basis for annual inspection: Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates that motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration: motorcycles within 4 years shall be inspected once every 2 years; those over 4 years shall be inspected once a year. National regulations: Motor vehicles must regularly pass exhaust emission tests, vehicle appearance, lights, brakes, chassis, and other inspections, and obtain an inspection qualification mark without any violation records. All annual inspection dates are based on the date registered on the driving license. Motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration, generally referred to as "annual inspection" or "annual review."
14
1
Share

How to switch Toyota tripa?

Toyota tripa is switched by pressing the small rod-shaped button on the right side of the instrument panel, located below the speedometer. Here is more information about the instrument panel: 1. Basic components: tachometer, turn signal indicator, coolant temperature gauge, fuel level, speedometer with odometer, adjustment and test button, indicator lights or driver information system, trip odometer reset button. 2. Indicator lights: EPC (Engine Power Control) system indicator, exhaust monitoring system indicator, ESP (Electronic Stability Program) indicator, generator fault indicator, Audi A3 seat belt indicator, fuel tank system warning indicator.
15
1
Share

How to adjust the time and date on a 2007 Audi A6L?

Audi A6L time needs to be adjusted on the MMI control panel. Here is some relevant information about the Audi A6L: 1. Interior: The new Audi A6L's interior adheres to the "wrap-around" design concept, crafted with near-demanding standards to achieve "best-in-class," where nobility and refinement are self-evident. The instrument panel and door trim together outline graceful curves, embracing both the driver and passengers. 2. Management System: Audi's innovative intelligent thermal management system optimally distributes the heat generated by the engine among the engine, transmission, and cabin. Integrated into the engine control unit, the intelligent thermal management system can make real-time adjustments based on engine conditions and environmental variables (such as ambient temperature, air conditioning system settings, etc.).
9
0
Share

What are the vision requirements for a C1 driver's license?

For the C1 driver's license physical examination, the naked vision or corrected vision of both eyes must reach above 4.9 on the logarithmic visual acuity chart. Below is relevant information about the C1 driver's license: 1. License code: C1. 2. Permitted vehicle types: Small and micro passenger vehicles, as well as light and micro cargo vehicles, light, small, and micro special-purpose vehicles. 3. Other permitted vehicle types: C2, C3. 4. Requirements for examination vehicles: Light ordinary cargo vehicles with a length of no less than 5 meters, or small ordinary passenger vehicles with a length of no less than 4 meters, or cars with a length of no less than 4 meters.
10
4
Share

What are the differences between KYB shock absorbers in blue, yellow, and black?

KYB's black shock absorbers are replacement parts for original equipment, and their tuning style is very similar to the original shocks. The yellow shock absorbers are short-stroke shocks, which must be used with shorter springs. KYB's yellow shock absorbers can lower the vehicle height. The blue shock absorbers are stiffer and provide better support, but they do not lower the vehicle height. If you want to use blue shock absorbers, they can be paired with the original springs. Below is some relevant information about shock absorbers: 1. The function of shock absorbers: To improve the wheel's contact with the ground, thereby enhancing traction. Better traction can improve both handling and safety. 2. Composition: Shock absorbers consist of a shock tube and a spring. The spring is the elastic element, and the shock tube provides damping.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.