Where is the Bridgestone tire manufacturer located?

Does the Air Conditioning Evaporator Need Cleaning?

The air conditioning evaporator does require cleaning, and the cleaning method is as follows: 1. Remove the air filter and blower of the vehicle to be cleaned; 2. Place a clean water basin under the air conditioning drain outlet of the vehicle to collect wastewater; 3. Adjust the bend of the endoscope camera on the cleaning machine to an appropriate angle; 4. Evenly spray a cleaning agent onto the evaporator; 5. Replace the cleaning agent in the cleaning gun and repeatedly rinse the evaporator from top to bottom until the foam disappears; 6. Pour clean water into the empty cleaning agent bottle and repeatedly rinse the evaporator; 7. Evenly spray a long-lasting antibacterial agent for automotive evaporators onto the evaporator until it is completely used; 8. Install the blower to dry the evaporator; 9. Use a fogging antibacterial machine to perform fogging sterilization on the air conditioning ducts; 10. Start the vehicle, turn on the air conditioning internal circulation mode, set the fan speed to maximum, and close the AC mode for fogging sterilization; 11. Remove the machine and open the car doors for ventilation.

15

3

Share

What Vehicles Can an A1 Driver's License Drive?

A1 license holders can primarily drive large buses, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, three-wheeled vehicles, and wheeled self-propelled machinery, but they cannot drive trailers or motorcycles. Below is an introduction to related content: 1. Vehicles permitted by an A2 driver's license: tractors and B1, B2, C1, C2, C3, C4, M. 2. Vehicles permitted by an A3 driver's license: city buses and C1, C2, C3, C4. 3. Vehicles permitted by a B1 driver's license: medium-sized buses and C1, C2, C3, C4, M (medium-sized buses refer to buses with fewer than 19 seats, such as minibuses and vans). 4. Vehicles permitted by a B2 driver's license: large trucks and C1, C2, C3, C4, M. 5. Vehicles permitted by a C1 driver's license: small cars and C2, C3, C4 (small cars refer to passenger vehicles with fewer than 9 seats, such as sedans).

15

3

Share

What is Gear Shift Jerking?

The causes of gear shift jerking: The engine speed does not match the current vehicle speed, meaning there is a speed difference between the engine speed and the clutch plate speed. Solutions for gear shift jerking are as follows: 1. Adjust the shift RPM. Appropriately reduce the engine speed when shifting gears, for example, shift at 1500 rpm. For large-displacement engines or those with good low-end torque, shifting can be done at a low RPM of 1000-1200 rpm. 2. Adjust the gear engagement sequence. Using skip-shifting can avoid jerking, such as shifting directly from 2nd gear at 2000 rpm to 4th gear, or from 3rd gear to 5th gear. 3. Shorten the shift time. Using the one-step method (depressing the clutch, then downshifting and upshifting in one continuous motion) can reduce the overall shift time, and the engine speed will drop less, avoiding jerking. 4. Lightly press the throttle during shifting. Gently pressing the throttle during shifting will neither cause high-speed idling nor result in jerking due to a rapid drop in RPM.

5

Share

Why Does Engine Oil Increase?

There are three reasons for the increase in engine oil: mixing of gasoline or water into the oil, engine component mechanisms, and temperature conditions. Below is an introduction to the causes of engine oil increase: 1. Mixing of gasoline or water into the oil: During vehicle operation, poor sealing of pistons or cylinders allows mixed gas to enter the crankcase. When the temperature drops, the gas condenses into liquid and flows back into the oil pan, increasing the oil level. At this time, water mixes into the oil. If fuel does not fully combust in the cylinders, it flows back into the oil pan, increasing the oil volume and diluting the oil, reducing its performance and failing to protect the engine. 2. Engine component mechanisms: The increase in oil volume is related to engine component mechanisms, such as insufficient cylinder pressure, poor cylinder sealing leading to reduced engine power and difficulty starting, or faulty fuel injectors causing dripping or excessive fuel injection. These two situations require monitoring by a mechanic to confirm the cause and perform repairs. 3. Temperature conditions: During cold starts, a richer fuel mixture is required, so the fuel injector sprays more gasoline. This results in excess gasoline flowing back into the oil pan. Generally, the main reason for oil increase is excessive fuel injection.

11

2

Share

How to Use the Car Air Conditioning Correctly?

Turn on the AC switch and adjust the air vent selection knob. When using cold air, direct the vents upward; when using warm air, direct them downward. Adjust the fan speed switch. At low speeds, set the fan speed to a low gear to avoid insufficient power generation and inadequate cooling.

1

4

Share

What are the hazards of excessive engine oil to the engine?

The hazards of excessive engine oil to the engine are: 1. It may cause the crankcase to explode; 2. The engine exhaust pipe emits blue smoke; 3. Piston ring sticking and fuel injector clogging; 4. Reduced engine output power; 5. Oil leakage. The methods to deal with overfilled engine oil are: 1. Remove the oil seal screw to drain the oil; 2. Use an oil pump to extract the excess oil. The functions of engine oil are: assisting in engine lubrication and wear reduction, cooling and temperature reduction, sealing and leak prevention, rust and corrosion prevention, and shock absorption. The steps to change engine oil are: 1. Run the engine to reach operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the oil; 4. Apply new oil to the gasket of the new filter; 5. Pour new oil into the oil pan; 6. Check for leaks under the engine; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.

6

5

Share

Where is the Bridgestone tire manufacturer located?

Does the Air Conditioning Evaporator Need Cleaning?

What Vehicles Can an A1 Driver's License Drive?

What is Gear Shift Jerking?

Why Does Engine Oil Increase?

How to Use the Car Air Conditioning Correctly?

What are the hazards of excessive engine oil to the engine?

How to Set Up the 10-Color Ambient Lighting in the Passat?

How to Remove the Rear Door Handle of a Meikairui?

Why does the car shake during cold start?

How to Deal with Low Tire Pressure Warning?