Where is the brake in an automatic transmission car?

2 Answers
Brody
07/28/25 5:25pm
In an automatic transmission car, both the brake and the accelerator are located at the foot. The accelerator is on the far right, and the brake is to the left of the accelerator. Both are controlled by the right foot. Precautions for using the brake are as follows: 1. When pressing the brake or accelerator, the body needs support to maintain balance. When the right foot is on the pedal, the left foot can stabilize the body on the floor. If both feet are placed on the brake and accelerator separately, they will be in a semi-suspended state without a stable point of force, which can easily lead to unstable operation of the accelerator or brake. 2. In an emergency, if both feet are placed on the brake and accelerator, there is a high chance of making a wrong judgment, such as mistaking the accelerator for the brake. Using one foot to control both the brake and accelerator greatly reduces this possibility and also lowers the vehicle's side-slip coefficient when pressing the brake while the accelerator is engaged. 3. If the brake in an automatic transmission car were placed where the clutch is in a manual transmission car, with the right foot on the accelerator and the left foot on the brake, the safety coefficient might improve.
Was this review help?
1
1
Share
DiRiley
08/11/25 11:41pm
I remember driving for many years. In an automatic transmission car, the brake is the pedal on the left side under the foot, controlled by the right foot. When I drove a manual transmission before, there were three pedals: clutch, brake, and accelerator. Now, with an automatic transmission, it's much simpler—no clutch pedal, and the brake is still in the same position on the left. The key is that in an emergency, you can instinctively extend your foot to press it, and the fixed position helps with quick reaction. I usually make it a habit to lightly tap the brake a few times every time I get in the car to confirm it's responsive before starting the journey. After driving for a long time, muscle memory develops—the brake is on the floor directly in front of the driver's seat, with the accelerator on the right and the brake on the left. New drivers don’t need to be nervous; just practice a few times to get familiar with it. Be careful not to confuse the left and right pedals, especially on slippery roads in snowy conditions—lightly pressing the brake in advance can help prevent skidding. Once the positions are clear, driving becomes much easier and safer.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the rate of Tesla battery degradation?

When a Tesla has been driven 17,000 miles (27,359 kilometers), its range decreases from 310 miles to 294 miles. After 27,000 miles (43,452 kilometers), the degradation reaches 13%. At 26,000 miles (41,743 kilometers), the degradation is 7%. Here is some relevant information: 1. A car's battery typically provides power for starting the vehicle and operating electrical components. For electric vehicles, the battery plays an absolutely crucial role in the car's value. 2. Since the vehicle's operation entirely relies on the battery's power, pure electric vehicle batteries degrade faster than those in gasoline-powered cars and require regular replacement.
19
0
Share

What brand is the Lynk & Co 05?

Lynk & Co 05 is a vehicle under the Geely brand, categorized as a compact SUV. Taking the 2020 Lynk & Co 05 as an example, its body dimensions are: length 4592mm, width 1879mm, height 1628mm, with a wheelbase of 2734mm, a minimum ground clearance of 213mm, a fuel tank capacity of 40 liters, and a curb weight of 1480kg. The 2020 Lynk & Co 05 is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 254PS, a maximum torque of 350Nm, and a maximum power of 187kW. It is paired with an 8-speed automatic transmission.
12
4
Share

What is the reason for the steering becoming lighter after changing new tires?

The reason for the steering becoming lighter after changing new tires is that the tire pressure is higher. The principle behind the steering becoming lighter after changing new tires: When the original tire pressure was at a normal level, the new tires have higher pressure after replacement, which means the rolling resistance decreases. As a result, the steering naturally feels lighter. The importance of car tire pressure: Both excessively low and high tire pressure can affect the lifespan of the tires and fuel consumption. High tire pressure concentrates the vehicle's weight on the center of the tread, leading to rapid wear in that area. Conversely, low tire pressure can cause uneven tire contact with the road, resulting in wear, increased rolling resistance, and higher fuel consumption.
9
2
Share

To Install or Not to Install Engine Undercovers?

Engine undercovers are necessary for installation as they can prevent burns. Advantages of installing engine underbody covers: During normal driving, encountering stones or curbs can damage the chassis. Installing an engine underbody cover effectively prevents this issue, keeps mud out of the engine, protects against chassis scraping, and provides significant protection when driving on uneven roads or when foreign objects hit the engine. Disadvantages of installing engine undercovers: If a metal engine undercover is installed, it may interfere with the engine's ability to drop in the event of a collision. Additionally, installing an engine undercover creates a relatively enclosed space around the engine, which could potentially affect the vehicle's heat dissipation.
12
0
Share

What Causes a Car to Shudder When Starting?

The reasons for a car shuddering when starting are: 1. The throttle is dirty or the fuel injector has excessive carbon deposits, causing the gasoline sprayed by the cold start injector to be largely absorbed by the carbon deposits; 2. Uneven distribution of positive pressure between the main and driven discs, inconsistent adjustment of the separation levers, or uneven separation finger ends of the diaphragm spring, leading to asynchronous compression timing and uneven force on the pressure plate, causing it to tilt; 3. Weakened damping spring elasticity, clutch torsion damping spring elasticity, or clutch pressure spring elasticity, resulting in cracks in the diaphragm spring; 4. Loose engine mounting or misalignment between the transmission shaft and the engine crankshaft centerline.
3
3
Share

What is the function of the evaporator in a car's air conditioning system?

The function of the evaporator in a car's air conditioning system is to exchange heat with the outside air, absorbing heat through liquefaction to achieve a cooling effect. The evaporator is a component within the air conditioning system where high-pressure liquid refrigerant passes through the expansion valve into the evaporator. The atomization by the expansion valve turns the liquid refrigerant into a mist, which then transforms into a gaseous state under low-pressure conditions. During this transformation process, it absorbs heat from the air, turning it into cool air, thereby achieving the cooling effect. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the vehicle cabin, providing a comfortable environment for passengers.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.