Where is the Bora's fuse box located?

2 Answers
LaKendra
07/25/25 1:13pm
The Bora's fuse box is located inside the instrument panel and the cabin of the vehicle. If any electrical equipment stops working during the use of the car, it may be due to a blown fuse. The fuse box is responsible for transmitting driving information to various parts of the vehicle body and is a key component in the car's electronic control system. Relevant information is introduced as follows: The Bora is a compact sedan under the Volkswagen brand, powered by the EA111 series 1.4TSI turbocharged engine. In terms of body dimensions, the Bora measures 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. It is a four-door, five-seater sedan.
Was this review help?
3
0
Share
DaisyDella
08/11/25 8:41pm
I remember the fuse boxes of the Volkswagen Bora are most commonly found in two locations: one is in the engine compartment, on the left side near the battery, where there's a square plastic cover that you can gently pry open or pull the latch to reveal various fuses and relays, mainly used for components like headlights and air conditioning; the other is inside the car, under the dashboard on the driver's left side, where there's a small door or sliding cover that you can lift to see more fuses, related to things like windows or the radio. When looking for them, always turn off the engine to prevent accidental short circuits. If you're not familiar with the location, check the manual or an app for your car's model and year—models after 2015 might have them more centralized. I've personally encountered a blown fuse causing the lights to stop working, so it's important to check carefully and not force anything. If needed, keep a multimeter handy to test the circuit. Basic maintenance knowledge can save a lot on repair costs, and it's practical to take a quick glance at the lighting system before driving.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What causes the malfunction of Audi A4 steering wheel buttons?

Audi A4 steering wheel button malfunction may be caused by poor contact between the clock spring and the buttons. Reasons for malfunction: You can try pressing the horn to see if it works normally. If not, it indicates that the clock spring is damaged. The clock spring ensures that the steering wheel remains powered even when rotating. If the clock spring is damaged, all functional buttons on the steering wheel will fail. Repair tips for button malfunction: If the issue is with the clock spring, it can only be resolved by replacing the clock spring, which involves removing the steering wheel for installation. If it's just poor contact with the buttons, you can use a small screwdriver to pry off the keycap, then clean the black oxide on the contact copper piece with a cotton swab dipped in alcohol, and finally reinstall the keycap for normal use.
6
1
Share

Should a motorcycle get insurance or license plate first?

Motorcycles should get insurance first. The reasons for getting motorcycle insurance first are: If you don't purchase insurance, you'll be missing one of the core required documents. Therefore, buying insurance is a necessary step before registering a motorcycle. Motorcycle considerations: When licensing a motorcycle, you must purchase compulsory vehicle insurance before it can be driven on the road. Check for paint scratches - don't inspect them directly facing the paint, but rather view them from the side with light to detect any scratches. Inspect the engine, power steering pump, and brake booster components for any fluid leaks. After purchasing a new motorcycle, first buy insurance, then obtain a temporary license plate before driving it on the road. Use the purchase invoice to pay the purchase tax, then with the purchase tax receipt, vehicle invoice, certificate of conformity, insurance, and ID card, go to the DMV to register for a license plate.
14
5
Share

Where should the warning signs for hazardous material vehicles be placed?

Warning signs for hazardous material vehicles should be hung at the triangular beacon light positioned at the front center of the top surface of the driver's cab. The identification plate must be fixed on the right side of the vehicle's rear, corresponding to the license plate, and should not be randomly hung or placed inside the driver's cab. Warning label specifications: For tanker vehicles, the words "Hazardous Material" (large red reflective font) should be painted in the center of the upper part of the color bands on both sides of the tank. The font should be bold, with a minimum height of 250mm. For vehicles transporting flammable and explosive hazardous materials, the words "No Open Flame" (large red reflective font) should be painted in the center above the color bands on both sides of the tank, also in bold font with a minimum height of 250mm. Purpose of warning labels: They alert drivers in advance to drive carefully and pay attention to yielding.
9
1
Share

How long does it take to bake car paint?

Original high-temperature baking paint for cars generally takes about half an hour per coat. Equipment for car paint baking: The paint spraying equipment at any brand's automotive after-sales service center typically includes branded baking booths, branded paint spray guns, etc. Automotive paint processes mainly consist of 4 layers: The first is the electrophoretic paint, whose main function is rust prevention. The second is the primer, which primarily resists UV rays and stone chipping, and provides a base for the color coat. The third is the color coat, whose main function is aesthetics. The fourth is the clear coat, which gives the car body a glossy finish and resists stone chipping. Main effects of over-baking: It damages the paint's flexibility, reduces its adhesion, making the paint brittle and diminishing its resistance to stone chipping. Otherwise, if the car body surface is hit or slightly scratched, the paint may crack or even peel off.
11
2
Share

Is the clutch of Maxus G50 a dry dual-clutch or wet dual-clutch?

The clutch of the Maxus G50 model is a dry dual-clutch. The clutch mainly has three functions: Ensuring smooth car starting. There is significant inertia when the car moves from a standstill to forward motion, and the engine generates substantial torque resistance. Ensuring smooth gear shifting to prevent transmission overload. The car may shake when the clutch is released to a certain extent, requiring acceleration to start. Keeping the foot on the clutch for extended periods will shorten the clutch's lifespan. Precautions for clutch maintenance: The most important aspect of clutch maintenance is to avoid frequently placing the foot on the clutch pedal during daily use. When releasing the clutch, follow the principle of 'quick, pause, slow'. If the friction disc and pressure plate are contaminated with oil or rust, they should be disassembled to remove the oil or grease.
5
3
Share

Where is the Auto Start-Stop located in the Haval H7?

Haval H7's Auto Start-Stop is located below the left side of the steering wheel, above the accelerator pedal and brake pedal. Concept of Auto Start-Stop: The so-called engine auto start-stop is a system that automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. When it's time to move forward again, the auto start-stop system automatically restarts the engine. How to use Auto Start-Stop in manual transmission cars: For manual transmission cars, when parking, shift to neutral - pull the handbrake - release the clutch. After completing these three operations, the system will automatically shut off the engine. When the clutch is pressed again, the engine will automatically start.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.