Where is the BMW VIN located?

2 Answers
Theresa
08/27/25 6:32am
BMW VIN can be found in: 1. Inside the engine compartment under the hood; 2. On the nameplate above the front bumper plastic cover. The VIN contains information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. BMW models include: BMW X1, BMW X2, BMW X3, BMW X54, BMW X5, etc. Taking the 2021 BMW X1 as an example, it is a compact SUV with body dimensions of: length 4565mm, width 1821mm, height 1620mm, and a wheelbase of 2780mm. The 2021 BMW X1 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, maximum torque of 220Nm, and maximum power of 103kW, paired with a 7-speed dual-clutch transmission.
Was this review help?
1
3
Share
VanArthur
09/09/25 5:24am
As a seasoned car enthusiast who frequently tinkers with vehicles, I've noticed that BMW's VIN (Vehicle Identification Number) is typically hidden in a few common spots. The most visible location is the lower left corner of the windshield – you can spot it from outside the car as a small sticker printed on the glass. Another spot is in the engine bay: pop the hood and look for a small plate near the firewall at the front or beside the engine. The door edge is also a common hiding place; open the driver's door and check the side of the door frame where you'll find a metal tag. This number is actually crucial—it's needed for car insurance, repairs, or when selling the vehicle, as it represents each car's unique identity. I recommend checking the windshield first, as it's usually the most obvious spot. If you can't find it, don't panic—just refer to the owner's manual or vehicle registration documents, which always carry the full number. During maintenance, remember to check if the label is worn or peeling to avoid any hassles later.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is the speed limit for motorcycles in urban areas?

Motorcycles are classified as motor vehicles, and there is no specific speed limit for motorcycles on urban roads. Speed limits are set for specific road sections, and generally, the speed limit for motorcycles does not exceed 80 km/h. However, regardless of speed, both the motorcycle rider and passengers must wear safety helmets as required by regulations. According to the "Road Traffic Safety Law" and its "Implementation Regulations," the speed limit regulations are as follows: 1. Roads without a centerline: 30 km/h for urban roads and 40 km/h for highways. 2. Roads with only one motor vehicle lane in the same direction: 50 km/h for urban roads and 70 km/h for highways. 3. Roads with two lanes in the same direction: The minimum speed for the left lane is 100 km/h; for roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. 4. Highways: The maximum speed for small passenger vehicles must not exceed 120 km/h, other motor vehicles must not exceed 100 km/h, motorcycles must not exceed 80 km/h, and the minimum speed must not be less than 60 km/h.
5
3
Share

How heavy a vehicle can BZZ-100 carry?

100KN=10204.08KG=10.20408 tons. The following is the relevant content introduction: 1. Cumulative equivalent axle passes: The concept of cumulative equivalent axle passes is used in pavement design. There are many types of vehicles driving on the road, so a standard axle load must be selected. Based on the current situation and development trend of road vehicle transportation. In China, pavement design uses a dual-wheel single axle load of 100kN as the standard axle load, denoted as BZZ-100. 2. Principles: When converting various axle loads to the standard axle load, two principles should be followed to ensure that the effect of the axle load on the pavement is the same before and after conversion: First, the conversion should be based on achieving the same critical state, that is, for the same pavement structure, after N1 times of axle load A, the pavement reaches the predetermined critical state, with a deflection of L1, and after N2 times of axle load B, the pavement reaches the same critical state, with a deflection of L2. At this time, the effects of axle loads A and B are equivalent. The conversion relationship between the number of passes of the two axle loads should be established according to this equivalence principle. Second, for a certain traffic composition, no matter which axle load standard is used for axle load conversion, the pavement thickness calculated from the converted number of axle load passes should be the same.
16
0
Share

Which part of the tire will experience increased wear if the tire pressure is too high?

Tire pressure that is too high will cause increased wear on the central part of the tire tread. Tire pressure will rise or fall with changes in temperature and tire temperature. Generally, for passenger cars and SUVs, the recommended tire pressure when the tires are cold is around 2.3-2.5 bar. Factors affecting tire lifespan: 1. Low tire pressure: Both excessively low or high tire pressure will affect the tire's lifespan. If the tire pressure is too low, the radial deformation increases, causing excessive deformation on both sides of the tire wall, leading to wear on the shoulders of the tread. This also raises the tire temperature, significantly reducing the tire's lifespan. 2. High tire pressure: If the tire pressure is too high, the tire's rigidity increases, deformation and contact area decrease, resulting in higher unit pressure on the central part of the tread and accelerated wear. This causes central tread wear, affecting comfort and reducing tire lifespan.
1
3
Share

What is the prado?

prado is the Toyota Land Cruiser Prado, a global strategic model of Toyota Motor Corporation. Taking the 2019 Prado as an example, its body dimensions are: length 5010mm, width 1885mm, height 1890mm, wheelbase 2790mm, minimum ground clearance 215mm, and fuel tank capacity 87l. The 2019 Prado is equipped with a 3.5L naturally aspirated engine, with a maximum power of 206kw and a maximum torque of 365nm, paired with a 6-speed automatic transmission. It uses a double-wishbone independent suspension for the front suspension and a four-link non-independent suspension for the rear suspension.
18
3
Share

What are the differences between the Vision and the Emgrand?

The differences between the Vision and the Emgrand lie in their body dimensions: the Vision measures 4599mm in length, 1747mm in width, and 1482mm in height, with a wheelbase of 2615mm; while the Emgrand measures 4632mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm. Both the Vision and the Emgrand are equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kW and a maximum torque of 142Nm, paired with a 5-speed manual transmission. Both models feature a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
17
4
Share

Is the Electronic Driver's License Nationwide in 2021?

2021 electronic driver's license is nationwide. Below are the relevant details about the electronic driver's license: 1. Pilot cities: Tianjin, Chengdu, Suzhou. Currently, only these three cities are implementing the electronic driver's license as pilot projects, and it is valid nationwide. Based on the pilot results, more cities will be selected in the second half of the year to expand the pilot, with full nationwide promotion planned for 2022. 2. Implementation date: Starting from June 1, 2021. 3. Legal effect: The electronic driver's license has the same legal effect as the paper version. If stopped by traffic police for a license check, vehicle owners in pilot cities can present their electronic driver's license. The obtained electronic driver's license can prove that the driver has a valid license when the physical one is not available. Traffic police are not allowed to penalize drivers for 'not carrying a valid paper driver's license.'
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.