Where is the BMW rear window wiper switch located?

1 Answers
DeTanner
07/29/25 10:48pm
BMW rear window wiper switch is located on a knob at the top of the wiper switch. Turn it forward to activate the rear wiper. Here is some relevant information about BMW: 1. Brand Influence: Choosing BMW is a symbol of status and taste, a hallmark of successful individuals. 2. Logo Meaning: BMW started as an aircraft engine manufacturer, leading many to believe the logo represents a rotating propeller. However, the true meaning of the blue and white symmetrical emblem is quite simple - it mirrors the Bavarian state coat of arms, reflecting BMW's authentic Bavarian heritage.
Was this review help?
10
4
Share
More Forum Discussions

How to Detect When the Battery is Fully Charged?

Detecting when the battery is fully charged can be determined by the charging time. Typically, a household car battery has a capacity of around 60Ah, and the required charging current is one-tenth of the battery capacity, which is 6A. Charging at this current usually takes about 3 to 5 hours to fully charge the battery. If a lower current is used for charging, it may take around 10 hours to fully charge. A battery, also known as an accumulator, is a type of cell that works by converting chemical energy into electrical energy. It mainly consists of lead and its oxides as electrodes, with a sulfuric acid solution as the electrolyte. Types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries.
2
1
Share

Where to Find the Tire Pressure Markings on Tires?

Tire pressure markings can be found on the sidewall of the tire. These markings typically indicate the maximum load capacity of a single tire and the maximum safe inflation pressure under normal conditions. For example, if the sidewall reads MAX.PRESS.350kPa, it means the maximum safe inflation pressure for the tire under normal conditions is 350kPa. Similarly, MAX.Load615KG indicates the maximum load capacity of a single tire is 615KG. The normal tire pressure range is generally between 2.3 to 2.5 bar, but the standard pressure may vary depending on the vehicle model. Additionally, tire pressure can be influenced by seasonal temperature, driving conditions, and vehicle load.
18
1
Share

How Many Times Can a Cross-Province Temporary License Plate Be Applied For?

Cross-province temporary license plates can only be applied for once. Temporary license plates mainly come in two types: temporary license plates for use within an administrative jurisdiction and temporary license plates for use across administrative jurisdictions. Temporary license plates for use within an administrative jurisdiction can be applied for three times, each time valid for 15 days. However, temporary license plates for use across administrative jurisdictions can only be applied for once, with a validity period not exceeding 30 days. Documents required for obtaining a temporary license plate: Identity proof of the vehicle owner and the agent; proof of the vehicle's origin; the whole vehicle factory certificate for domestically produced motor vehicles or the import certificate for imported motor vehicles; and the vehicle identification number (frame number) and engine number rubbing mold. After reviewing the above documents and ensuring they comply with regulations, and after passing the safety and technical performance inspection of the vehicle, the vehicle management office will issue a temporary driving license plate, specifying the validity period and the start and end locations. Notes on vehicle license plates: If the owner chooses to receive the license plate by mail, it will take longer for the license plate to arrive, typically 3-4 days for mailing. Therefore, while waiting for the official license plate, it is important to pay attention to the validity period of the temporary license plate. Once the temporary license plate is about to expire, it is necessary to promptly apply for a replacement.
16
0
Share

How to Start on a Slope with Manual Transmission and Electronic Handbrake?

The method for starting on a slope with manual transmission and electronic handbrake is: 1. Press the handbrake button to engage the handbrake and hold the car, then shift into 1st gear; 2. Slowly lift the clutch pedal with your left foot, and once the clutch pedal reaches the engagement point, pause briefly; 3. At this point, gradually press the accelerator pedal with your right foot, and when you feel the car has a forward momentum, release the electronic handbrake. The electronic handbrake is a technology that achieves parking brake through electronic control. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking, except that the control method has changed from the previous mechanical handbrake lever to an electronic button. Manual transmission refers to a manual gearbox (MT), also known as manual transmission, where the gear lever is manually operated to change the gear meshing device inside the transmission, altering the transmission ratio to achieve gear shifting.
6
5
Share

Why can't the car key unlock the door?

There are several reasons why a car key may not unlock the door: 1. The remote key battery is dead or the car battery is depleted; 2. There is strong signal interference in the vicinity - in this case, you can use the hidden mechanical key inside the remote key to open the door; 3. If even the mechanical key fails to unlock the door, it may indicate that the car's central locking system is in an electronically locked state. You'll need to wait one or two hours for the lock to disengage before attempting to unlock again. A remote key refers to a system that allows doors to be locked or unlocked from a distance without inserting the key into the lock. It works by emitting weak radio waves from the owner's vicinity, which are received by the car's antenna. The electronic control unit (ECU) then identifies the signal code, and the system's actuator (either a motor or electromagnetic coil) executes the locking or unlocking action. This system mainly consists of two components: a transmitter and a receiver.
14
2
Share

What are the precautions during the car break-in period?

Precautions during the car break-in period include: 1. Avoid emergency braking: During the break-in period, it is crucial to avoid emergency braking as it subjects the car's braking system to significant impact, increasing the load on both the chassis and the engine. 2. Avoid overloading: Try not to operate the car at full capacity during the break-in period to prevent damage to the car's components. 3. Be cautious with long-distance driving: Control the driving time carefully. Continuous operation of the engine on highways during the break-in period increases the likelihood of component wear. 4. Avoid changing oil prematurely: The oil used during the break-in period is a specialized lubricant. Changing it prematurely can affect the car's proper break-in process.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.