···
Log in / Register

Where is the BMW M4 Cabin Air Filter Located?

4 Answers
Margaret
07/29/25 8:15pm

BMW M4 cabin air filter is located under the wiper on the passenger side. To replace the cabin air filter, you need to open the hood. When driving with the air conditioning on, the car draws in outside air into the cabin, but this air contains various particles such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. Without the cabin air filter, these particles would enter the cabin, not only contaminating the car's air conditioning system and reducing cooling performance but also causing allergic reactions, lung damage, irritability from ozone exposure, and unpleasant odors - all of which affect driving safety. The replacement interval for BMW M4 cabin air filter depends on usage conditions. For typical urban family cars, it's recommended to replace it every six months or once a year.

Was this review help?
2
5
Share
BarrettFitz
08/14/25 4:40pm

As a seasoned driver with over 20 years of experience, I can tell you that the BMW M4's cabin air filter is located behind the glove compartment on the passenger side. To replace it, you'll first need to remove the glove box, which is quite simple: empty the contents, unscrew the screws on both sides or push the clips, and the entire box can be taken off, revealing the filter compartment. The location is designed for easy maintenance, and doing it yourself saves both money and time. I recommend checking it every six months or 10,000 kilometers to ensure high filtration efficiency and prevent dust from clogging the air conditioning system. Choosing an original equipment manufacturer (OEM) filter can extend its lifespan and also prevent unpleasant odors from affecting respiratory health. If your usual parking environment is dusty, you should replace it more frequently, ensuring comfort and peace of mind on long trips without worrying about allergy issues.

Was this review help?
3
5
Share
Expand All
DelEmiliano
10/16/25 3:21am

As a BMW M4 owner, I just replaced the cabin air filter last year, which is located inside the glove compartment on the passenger side. Finding its position is quite simple: sit in the car, open the glove box, and you'll see a small door at the bottom of the inner wall - that's the filter housing. When replacing it, I recommend keeping a small wrench or screwdriver handy. Just gently remove the old filter and insert the new one - make sure to follow the arrow direction to avoid incorrect installation. I learned how to do it by watching online video tutorials, and the whole process only takes a few minutes, saving me hundreds in repair costs. Regular ventilation while driving helps extend the filter's lifespan and keeps the cabin air fresh and comfortable.

Was this review help?
17
3
Share
Expand All
EdenAnn
11/29/25 4:09am

As a car enthusiast, I know that the cabin air filter in the BMW M4 is located behind the glove box, making it easy for DIY. During maintenance, simply unclip the glove box to access and replace the filter, which traps dust and pollen to protect the AC system's efficiency. The replacement frequency varies with usage—changing it every 15,000 km for suburban driving is ideal to prevent system clogging.

Was this review help?
18
0
Share
Expand All
More Forum Discussions

What is considered as inventory car in terms of time?

Inventory cars generally refer to vehicles that remain unsold three months after leaving the factory. Below are two common types of inventory cars: 1. Those stored in the manufacturer's warehouse during the inventory period: Normally, such vehicles are in standard condition because manufacturers have strict regulations for managing inventory cars, ensuring that new cars delivered to users meet quality standards. Buyers can request dealers to provide purchase order documents to verify the purchase date. 2. Those stored in the dealer's warehouse during the inventory period: Buyers should generally be cautious with such vehicles, as unless it's a particularly reputable large dealership, some dealers' inventory management may not meet requirements, potentially leading to issues like lack of oil or battery charge, and there may also be noticeable exterior flaws.
8
0
Share

What Causes the Turn Signal to Flash Too Fast When It's Not Broken?

The reasons why the turn signal flashes too fast when it's not broken are as follows: one possibility is a damaged flasher relay, and another is poor bulb contact. Here are the solutions to fix a turn signal flashing too fast: 1. Replace the flasher relay: First, check if the flasher relay is functioning properly. Use a multimeter to test the output line of the flasher relay to see if there is a 12v output. If there is an intermittent output change, it indicates normal operation. If there is no output or a constant 12v output, it means the flasher relay is damaged and needs to be replaced. 2. Reinstall the bulb: Inspect the bulb and socket yourself to check for poor contact. Poor contact can naturally cause the signal to flash too fast, so you need to reinstall it securely.
4
0
Share

What are the differences between built-in and external tire pressure monitoring systems?

The differences between built-in and external tire pressure monitoring systems mainly lie in three aspects. Below is a detailed introduction to these three differences: 1. Price: In terms of price, the built-in type is more expensive. The external type is more affordable. 2. Installation method and time required, The installation of the built-in type takes more time and requires hiring a professional team to remove the tires. The installation of the external type takes less time and does not require hiring a professional team to remove the tires, as the car owner can do it themselves. 3. Others: The installation process of the built-in type is more complex. The installation process of the external type is simpler. In terms of accuracy, the external type is slightly less precise than the built-in type. In terms of theft prevention, the built-in type is more secure than the external type.
16
3
Share

What does the sawtooth line on the highway mean?

The sawtooth line on the highway refers to longitudinal deceleration markings, which serve as a deceleration warning and are commonly used on curves. Below are the relevant details: 1. Definition of longitudinal deceleration markings: These markings consist of a series of diamond-shaped dashed lines parallel to the lane dividing line. They are typically placed at bridge approaches and curves. 2. Function of longitudinal deceleration markings: Their primary purpose is to create a visual narrowing of the lane, inducing a sense of pressure on drivers, prompting them to automatically reduce speed at locations requiring deceleration, such as curves or slopes. When vehicles pass through sections with longitudinal deceleration markings, drivers will subjectively perceive the lane as gradually narrowing, leading them to take proactive deceleration measures and proceed slowly. This effectively prevents drivers from slamming on the brakes just before the stop line.
14
0
Share

How early can a vehicle's annual inspection be conducted?

Vehicle annual inspections can be conducted up to three months in advance. According to the "Motor Vehicle Registration Regulations", vehicle owners may apply for an inspection compliance mark at the local vehicle management office up to three months before the expiration of the motor vehicle's inspection validity period. It is recommended to complete the inspection two months or slightly over one month in advance. Failure to conduct the annual inspection on time will result in a fine and a 3-point penalty on the driver's license. Additional information is as follows: 1. The timing of vehicle annual inspections is calculated by month: The inspection date is not based on a specific calendar date but is calculated by month. 2. Consequences of overdue annual inspection: Previously purchased auto insurance policies will not remain valid. In the event of a traffic accident during this period, the insurance company will not provide compensation.
9
1
Share

What does the windshield washer fluid low icon look like?

The windshield washer fluid low icon is shaped like a fan, with water spraying from the bottom. The fan shape represents the windshield, and the water spraying below symbolizes the washer fluid nozzles located beneath the windshield. When this spray-shaped indicator light appears on the car dashboard, it means the windshield washer fluid is running low and needs to be refilled as soon as possible. The indicator will automatically turn off after adding washer fluid. Below are the functions of windshield washer fluid: 1. Breaking down dirt: Washer fluid cleans and removes stains. When there is dirt on the windshield, using washer fluid provides better cleaning results than plain water. 2. Lubrication: While plain water can offer some lubrication, it contains impurities that may cause friction between the wiper blades and the windshield, leading to scratches over time. Washer fluid, however, has lubricating properties.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.