Where is the BMW 5 Series Display Screen Switch?

1 Answers
BrandonFitz
07/29/25 9:43pm
BMW 5 Series display screen switch is located on the center console. Below are specific details about the BMW 5 Series: 1. Body dimensions: Length, width, and height are 4998mm, 1901mm, and 1559mm respectively. 2. Fuel consumption: 9.4L~12.1L per 100km. 3. Exterior: The overall design features BMW's iconic elements, with a sleek and elegant body, dynamic and sporty appearance, and smooth lines. 4. Interior: The interior is relatively understated, with fine craftsmanship and rich configurations, uniform and tight seams, comfortable steering wheel feel, and convenient display controls.
Was this review help?
6
1
Share
More Forum Discussions

What car brand is MG?

MG is an automotive brand under SAIC Motor Corporation Limited, originating from the UK. MG stands for Morris Garages, meaning Morris Garage. The MG brand includes models such as the MG6, MG HS, MG ZS, MG3, MG GS, MG GT, MG EZS, and the MG6 Plug-in Hybrid. Below is additional information about MG: 1. It features the strongest "Golden Power Combination" in its class, with a new-generation 1.5T PRO engine paired with a new DCT280 wet dual-clutch transmission, delivering a maximum power of 181 horsepower and a maximum torque of 285 Nm. 2. The MG HS is equipped with a 1.5T turbocharged engine, producing a maximum power of 169 horsepower and a maximum torque of 275 Nm, matched with either a 6-speed manual or a 7-speed dual-clutch transmission.
5
2
Share

Where is the oil filter of Peugeot 408 located?

The oil filter of Peugeot 408 is located inside the panel on the left side of the passenger footwell. The oil filter, also known as the oil cleaner, functions to remove debris, gum, and moisture from the engine oil, delivering clean oil to various lubrication points. Here are some details about the oil filter: 1. The oil filter generally has three stages: the oil strainer, the primary oil filter, and the secondary oil filter. 2. The oil strainer is installed in the oil pan before the oil pump and usually adopts a metal mesh design. 3. The primary oil filter is installed after the oil pump and is connected in series with the main oil passage. It mainly includes metal scraper type, sawdust filter type, and microporous filter paper type, with the microporous filter paper type being the most commonly used nowadays. 4. The secondary oil filter is installed after the oil pump and is connected in parallel with the main oil passage. It mainly includes microporous filter paper type and rotor type.
13
4
Share

Why is the vent hole on the transmission constantly leaking air?

The function of the vent hole is to ventilate the transmission. When the transmission runs for a long time, it heats up, causing the oil inside to expand and increase internal pressure. Without a vent hole, the oil could damage the oil seal, leading to air leakage. Precautions for use are as follows: 1. Prevent the loss of the vent hole cover. If the cover is lost, it is easy for dust, impurities, moisture, etc., to enter the transmission and mix with the oil, causing transmission failure. 2. Keep the vent hole unobstructed. Do not block the vent hole, as blockage may cause oil leakage in the transmission. 3. When passing through waterlogged sections, be careful to prevent deep water from submerging the transmission vent hole, which would allow dirty water to enter the transmission. This can lead to internal rust, increased wear, abnormal noise, and damage to the transmission.
2
0
Share

Can a Car with Outstanding Loan Be Sold?

Can a car with an outstanding loan be sold? Yes, but the following steps must be taken: First, agree on the vehicle price. The buyer will then repay the remaining loan amount, which will be deducted from the total vehicle price. The remaining amount will be given to the original owner. The vehicle must then be released from the mortgage, and the transfer procedures must be completed. Below is an introduction to motor vehicle loans: 1. There are two types of motor vehicle loans: (1) Apply for a loan directly when purchasing the vehicle. (2) After purchasing the vehicle in full, use the motor vehicle registration certificate to apply for a loan. 2. A vehicle under loan lacks the motor vehicle registration certificate. The certificate is held by the bank or financial institution as collateral. Without the registration certificate, the vehicle cannot undergo transfer procedures, file extraction procedures, modification filing procedures, etc. The owner only has the right to use the vehicle, not the right to sell it.
4
4
Share

Using Parking Lights or Low Beam at Night?

Use parking lights at night. Here is the relevant information: 1. Parking lights refer to the lamps installed at the highest points of the front and rear of the vehicle. They are somewhat similar to the anti-collision lights on the wingtips of an aircraft. They are mainly used to indicate the width and height of the vehicle during driving in conditions such as dusk, cloudy days, or rainy and foggy weather, helping other drivers determine relative positions and vehicle size during overtaking or meeting. Typically, parking lights are white at the front and red at the rear. 2. The next setting after parking lights is the low beam. Low beams are designed for close-range illumination, featuring a wide coverage angle (160°) but a short illumination distance, and the focus cannot be adjusted. 3. Halogen bulb parking lights are not suitable for prolonged use as daytime running lights. Additionally, the luminous intensity of parking lights differs from that of daytime running lights, and in certain situations, parking lights may not fulfill the role of daytime running lights.
3
0
Share

What to Do When the Ford Mondeo Engine Malfunction Light Comes On?

If the engine malfunction light comes on, you can follow these steps to address the issue: First, check whether the engine is running normally. Look for issues such as shaking, black smoke emission, or difficulty starting. If any of these problems exist, avoid restarting the engine. Note: If the red warning light is on, do not restart the engine under any circumstances. If the engine is running normally and the vehicle can still be driven, proceed to a service center as soon as possible to diagnose the issue. A service center can easily read the fault codes using a portable diagnostic tool, allowing for targeted repairs based on the fault information. If the engine is running normally, the owner can also try gently reconnecting the wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may help reset the system. Generally, the engine malfunction light may come on due to the following seven reasons: 1. Sensor Failure: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may become damaged, have poor contact, or lose signal transmission. When the car's ECU cannot accurately obtain engine data, the malfunction light will illuminate. 2. Fuel or Oil Quality Issues: If the recommended fuel or engine oil is not used as specified by the manufacturer, engine wear may occur, triggering the malfunction light. 3. Poor Combustion of Air-Fuel Mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Causes include faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines. 4. Turbocharger Issues: Problems with the intake boost system or turbocharger can also trigger the malfunction light. Common issues include turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. 5. Intake System Problems: Clogged engine intake passages can lead to the malfunction light turning on. A dirty or uncleaned air filter can cause intake issues. 6. Exhaust System Problems: Exhaust system failures, such as issues with the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, can trigger the malfunction light. The catalytic converter is the most common culprit, often affected by leaded gasoline, improper lubricant additives, physical damage, or fuel system faults. 7. Anti-Theft System Malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine control unit, the engine may not function properly, and the malfunction light will illuminate.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.