Where is the BMW 320 fuse box located?

1 Answers
ValentinaLee
08/28/25 3:33am
The fuse box of the BMW 3 Series is located in the trunk and in the engine compartment in front of the passenger seat. There is a storage compartment (glove box) in front of the passenger seat, inside which there is a black knob. Turn the black knob to open, and behind it is the fuse box. Here is more related information: 1. BMW 3 Series configuration: Taking the 2021 facelifted BMW 3 Series 325i M Sport Package as an example: It is a midsize 4-door, 5-seater sedan, equipped with an 8-speed automatic transmission, and has a fuel tank capacity of 59L. 2. 2021 facelifted BMW 3 Series: The 2021 facelifted BMW 3 Series 325i M Sport Package has a length, width, and height of 4719mm, 1827mm, and 1459mm respectively, a wheelbase of 2851mm, a top speed of 233 kilometers per hour, and uses a front-engine, rear-wheel-drive layout.
Was this review help?
2
0
Share
More Forum Discussions

What to Do When the Car Often Parks Under Trees and Gets Covered with Resin?

If your car is parked under trees and gets covered with resin, you can try the following methods to deal with it: 1. Use toothpaste to clean: Sprinkle water on the car body and simply wipe it with a wet cloth. Squeeze toothpaste evenly onto the cloth, spread it out, and make sure the cloth is soaked. You can then clean a large area and rinse it with clean water. This method not only removes resin from the car but also effectively eliminates scratches. Apply it to scratched areas, wait a few minutes, and then wipe it off for excellent results. 2. Use insect and tar remover: There are some commercial insect and tar removers available that can help car owners easily remove dirt from the car's paint. These cleaners are usually mild and do not harm the paint. Simply spray it on during car washing and wipe with a sponge to remove the dirt effortlessly. 3. Use essential balm: Essential balm, floral water, and other alcohol-based organic solvents can effectively dissolve sticky organic substances. They can effectively remove minor insect residues on the paint. After cleaning, rinse the paint surface promptly. 4. Use nail polish remover: Nail polish remover is quite common. Pour some on, wait for it to soak in, and then easily wipe off the dirt with a cloth. 5. Visit a 4S shop: Car washes often use polishing and buffing treatments.
17
5
Share

What are the tire specifications for the Jeep Compass?

The Jeep Compass comes with two tire specifications: 225/60R17 and 225/55R18. In 225/60R17, the first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 17 denotes the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. In 225/55R18, the first number 225 represents the tire width of 225MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 18 denotes the rim diameter of 18 inches. The letter "R" in the middle stands for radial tire. The tires used on the Jeep Compass are from the brand Nexen (NEXEN), with the tread pattern NPRIZRH7, featuring five-spoke star-shaped rims. All models come with a non-full-size spare tire. If you wish to replace the tires yourself, follow these steps: Retrieve the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring it touches the metal part of the frame. Raise the jack until it supports the car, ensuring the jack is positioned under the vehicle and at a right angle to the ground. Remove the hubcap, loosen the nuts counterclockwise, but do not fully remove them—just enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures the nuts turn, not the tire. Continue turning the nuts counterclockwise until they are loose, repeating this for all lug nuts, then remove them completely. Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts, tightening them by hand until all nuts are snug. The tire replacement is now complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
19
3
Share

Why is the 10th-generation Civic's reverse radar not alarming?

If the issue is considered, it might be due to a faulty buzzer! Here is the relevant introduction: Safety Assistance: The reverse radar is a safety auxiliary device for parking or reversing the car. It can inform the driver about surrounding obstacles through sound or more intuitive displays, eliminating the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, and helping the driver overcome blind spots and unclear vision. Power Line: If the radar is not sounding, first check whether the power line of the radar host is properly connected and whether there is current supply; then see if the radar host line is loose.
10
2
Share

How often should an Audi battery be replaced?

Audi batteries generally need to be replaced every 5-6 years. Below is relevant information about Audi battery lifespan: 1. The age of the battery affects its continuous power supply duration; 2. Currently used batteries are mostly lead-acid batteries, which come in standard and maintenance-free types; 3. Standard batteries have removable plastic plugs (six in total) that allow checking of the electrolyte level; 4. For Audi A3, battery replacement should be considered after exceeding 60,000 kilometers or when the vehicle is over five years old. Specific requirements can be found in the vehicle's maintenance manual.
6
4
Share

What is the failure rate per 100 vehicles (2-12 months) for the Geely Binrui?

The failure rate per 100 vehicles (2-12 months) for the Geely Binrui is 13.4%. Below are the relevant details: Number of failures per 100 vehicles (2-12 months): 34. Number of surveyed owners: 253. Failure distribution ratio: For the main types of failures in the Binrui (2-12 months), the distribution ratios are as follows: interior accounts for 8%, functional operations account for 8%, engine accounts for 7%, body appearance accounts for 3%, seats account for 3%, driving process accounts for 2%, electronic equipment accounts for 2%, air conditioning system accounts for 1%, and transmission system accounts for 1%.
9
5
Share

What does BYD's lifetime warranty for first owners mean?

BYD's lifetime warranty for first owners means that the first batch of buyers of specified models enjoy conveniences in terms of warranty or other aspects. Below are the relevant details about BYD's lifetime warranty for first owners: 1. During vehicle maintenance, it is necessary to replace engine oil and other fluids, as well as the oil filter and air filter, along with some consumable rubber parts and slowly wearing components. Additionally, the vehicle needs to be inspected; 2. If the usual driving environment is good and the vehicle is used gently, maintenance can be appropriately delayed; 3. If the usual driving environment is harsh, the vehicle is used aggressively, or driving is rough, it may be advisable to consider performing maintenance ahead of schedule.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.