Where is the BMW 3 Series Cabin Air Filter Located?

2 Answers
VanNicole
08/28/25 2:25am
The cabin air filter in the BMW 3 Series is located inside the glove compartment on the passenger side. The functions of the cabin air filter are: 1. To separate dust, pollen, and abrasive particles from the air; 2. To ensure clean air in the cabin and prevent bacterial growth. The BMW 3 Series has the following dimensions: length 4719mm, width 1827mm, height 1459mm, with a wheelbase of 2851mm and a fuel tank capacity of 59 liters. The BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum power of 115 kW and a maximum torque of 250 Nm. The maximum power is achieved at 4500 to 6500 rpm, and the maximum torque is available between 1250 to 4000 rpm. It is paired with an 8-speed automatic transmission.
Was this review help?
17
3
Share
VanBarrett
09/09/25 7:50am
When I last serviced my BMW 3 Series, I found the cabin air filter was right behind the glove box, super easy to locate. Just open the glove box door, there are a few clips or screws holding it in place - remove them and you'll see the filter compartment. Changing it yourself isn't difficult, just need a screwdriver. But be careful about model compatibility, don't get the wrong brand for BMW filters. I recommend checking it every 10,000 km or so - if this thing gets dirty, your car's interior air will be full of dust, making breathing uncomfortable, plus you can save some maintenance costs. Remember to test the AC airflow after replacement to ensure everything's normal before driving safely.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What is the reason for the up and down looseness in the Citroen C4L steering wheel?

Citroen C4L steering wheel has up and down looseness, which is most likely due to a failure in the steering mechanism, especially the universal joint in the middle of the steering column. Methods to address universal joint failure: If the connecting bolts of the precision universal joint are loose, the components need to be tightened. If the output shaft spline of the transmission is worn and loose, it requires correction, repair, or replacement. If the spline grooves of the drive shaft and the spline of the drive shaft fork tube are worn and loose, new components need to be replaced. Carefully observe the working condition of the steering wheel: As one of the most critical control components of the vehicle, the steering wheel is connected to many vehicle parts. Faults caused by the steering wheel can also help identify other vehicle issues. During driving, it is important to carefully observe the working condition of the steering wheel, as this can help detect potential vehicle faults in advance.
20
5
Share

What Happens If You Add Water to the Fuel Tank?

Adding water to the fuel tank can cause engine damage. Below is an introduction on why water should not be added to the fuel tank and the importance of refueling at reputable gas stations: Why water should not be added to the fuel tank: If water is added to the fuel tank, it will flow through the fuel system into the engine, causing rust in the cylinders and pistons. It may also score the engine walls, reducing compression, and in severe cases, even lead to an explosion in the crankcase. The importance of refueling at reputable gas stations: In daily vehicle use, when the fuel level is low, always refuel at reputable gas stations. Some areas may have unregulated gas stations where fuel quality is not guaranteed. If you refuel at such stations, unscrupulous vendors might mix water into the fuel to cut costs. This low-quality fuel, when used in your vehicle, can allow water to enter the engine through the fuel system, damaging the cylinders and pistons and causing irreversible harm to the vehicle.
9
1
Share

What Causes the Loud Engine Noise in Haval Big Dog?

Haval Big Dog's loud engine noise is due to the oil not meeting lubrication requirements during cold starts, resulting in high RPM and loud noise. Below are the reasons for the loud engine noise in Haval Big Dog: Oil Not Meeting Lubrication Requirements: During a cold engine start, the temperature is relatively low, and the oil has not yet been distributed to all components. Additionally, the oil inside the engine has completely drained back into the oil pan due to prolonged parking. It takes about 1 minute of warm-up for the engine to achieve full lubrication, after which the idle speed returns to normal. High Engine RPM: To quickly bring the engine up to normal operating temperature, the RPM during a cold start is also higher. This is why the engine noise feels louder when starting a cold engine, and it may also be accompanied by some vibrations. Furthermore, due to the high idle speed and increased fuel injection, incomplete combustion may result in a noticeable gasoline smell.
13
2
Share

Which cars feature a lion emblem?

Cars featuring lion emblems include the French Peugeot and SAIC's Roewe. Peugeot is a French automobile manufacturer with a logo depicting a standing lion. Roewe is an automotive brand under Shanghai Automotive Industry Corporation (SAIC), with its emblem consisting of two standing oriental lions. Here is additional information: 1. French Peugeot: Dongfeng Peugeot is a brand under Dongfeng Peugeot Citroën Automobile Company Ltd. In October 2002, Dongfeng Motor Corporation and French PSA Group (Peugeot Citroën) signed an expanded cooperation joint venture contract. The two major groups joined forces to fully implement the new blueprint of introducing the Peugeot brand into China, giving birth to Dongfeng Peugeot. The emblem of Peugeot is a standing lion, which has appeared on Peugeot products for 150 years. The lion can be seen on the hood or front grille of Peugeot vehicles. 2. SAIC Roewe: Roewe is an automotive brand under Shanghai Automotive Industry Corporation (SAIC). The center of its emblem features two lions guarding a Chinese ornamental pillar. Below the emblem is a modern-style symbol combining the letters "RW", which is the abbreviation of the brand name. Additionally, "RW" in ancient Egyptian also represents a lion. The base of the emblem consists of four symmetrically divided red and black blocks, subtly implying the mystery of yin-yang transformation, symbolizing the pursuit of innovation, continuous improvement, and transcendence.
9
1
Share

What does it mean when SOC reaches the limit value and terminates?

soc reaches the limit value and terminates means charging is completed or when the battery level is below 15% or 5%, power output will be restricted. The following is an introduction to automotive SOC and other indicator lights on the car dashboard: Automotive SOC: The full name is State of Charge, which refers to the battery's state of charge, also known as remaining battery capacity. It represents the ratio of the remaining dischargeable capacity after the battery has been used for a period or left unused for a long time to its fully charged capacity, usually expressed as a percentage. Other indicator lights: The hazard warning light is used to alert other vehicles and pedestrians when the car has a major malfunction or emergency situation; the hazard warning signal is indicated by the simultaneous flashing of the front, rear, left, and right turn signals; the battery indicator light shows the working status of the battery. It lights up when the ignition is turned on and turns off after the engine starts; if it does not light up or stays on continuously, the generator and circuit should be checked immediately; the fuel indicator light is a warning for insufficient fuel. When this light comes on, it means the fuel is almost exhausted. Generally, the vehicle can still travel about 50 kilometers from the time the light comes on until the fuel is completely depleted.
3
1
Share

Do Automatic Cars Require Clutch Pedal?

Automatic transmission cars do not require a clutch pedal. The specific reasons and precautions are as follows: Reasons for not needing a clutch pedal: Automatic transmission cars do not require a clutch pedal because they are not equipped with one. Automatic cars only have two pedals: the accelerator and the brake. If there is a third pedal on the left side, it is either a foot-operated parking brake or a footrest. Precautions for shifting gears in automatic transmission: When starting the car, shifting from P (Park) to D (Drive) passes through R (Reverse), which causes a reverse impact on the transmission and can damage it over time. The correct procedure is to turn on the power, press the brake, shift to N (Neutral) before starting the engine, and then shift to D (Drive).
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.