Where is the Bluetooth switch on the Great Wall pickup?

1 Answers
GideonLee
07/29/25 4:42pm
The Bluetooth switch on the Great Wall pickup is located at the upper left corner of the control panel and is a button. The Great Wall pickup, also known as the Fengjun pickup, is a type of vehicle produced by Great Wall Motors. A pickup is a practical multi-purpose utility vehicle that falls between a sedan and a truck, and is also a type of truck. The Great Wall pickup is positioned in the medium to large pickup market and currently includes both two-wheel drive and four-wheel drive models, with fuel options of diesel and gasoline. The dimensions of the Great Wall pickup are 5390mm in length, 1800mm in width, and 1730mm in height, with a wheelbase of 3350mm. The Great Wall pickup is equipped with an electronically controlled high-pressure common rail engine jointly developed by Great Wall Motors and Germany's Bosch. This engine delivers strong power, with a maximum torque of 225nm available between 1600 and 2600rpm, and a maximum power of 70kw. It features high low-speed torque and excellent acceleration, significantly outperforming traditional turbocharged diesel engines.
Was this review help?
3
5
Share
More Forum Discussions

How to Use the Wiper for Defogging?

The wiper control lever only controls the movement of the wiper blades and does not have a defogging function. The methods to activate the car's defogging system are as follows: 1. Press the front windshield defogger switch, and the front windshield defogger will start working. 2. Press the rear windshield defroster switch, and the rear windshield defroster will start working. More information about the wiper is as follows: 1. The wiper is a vehicle device used to remove raindrops and dust attached to the windshield, which can improve the driver's visibility and enhance driving safety. 2. The wiper assembly also includes components such as the motor, differential, 4-link mechanism, and wiper blade assembly.
9
4
Share

What is the displacement of the Lynk & Co 03?

The Lynk & Co 03 is equipped with three engines: a low-power version 1.5T engine, a high-power version 1.5T engine, and a 2.0T engine. Therefore, the displacements are 1.5T and 2.0T respectively. The model with the low-power 1.5T engine has 156 horsepower, the high-power 1.5T engine has 180 horsepower, and the 2.0T engine has 190 horsepower. More details are as follows: 1. The Lynk & Co 03 is a compact sedan. The low-power 1.5-liter turbocharged engine of this car has a maximum torque of 245 Nm. The maximum power speed of this engine is 5000 rpm, and the maximum torque speed ranges from 1450 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed manual transmission. 2. The high-power 1.5-liter turbocharged engine has a maximum torque of 265 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed ranges from 1500 to 4000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine has a maximum torque of 300 Nm. The maximum power speed of this engine is 4700 rpm, and the maximum torque speed ranges from 1400 to 4000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission.
18
3
Share

What are the causes of engine stalling?

Here are the reasons that can cause engine stalling: 1. Abnormal resistance value of the crankshaft position sensor itself, causing the crankshaft speed signal to disappear after the engine warms up, leading to engine stalling. 2. The fuel pump's resistance changes after prolonged operation, failing to provide normal fuel pressure and causing engine stalling. 3. Ignition system failure or overheating of the ignition module, preventing normal operation and causing engine stalling. 4. Abnormal throttle signal voltage causing the engine to stall while driving. 5. Loose wiring connections leading to occasional engine stalling. Here are additional methods for handling engine stalling: 1. Check if the fuel tank has sufficient fuel. 2. Inspect whether the filter is clogged. 3. Check if the battery is supplying power. 4. Verify if the fuel pump is delivering fuel.
5
5
Share

Do You Need to Press the Clutch When Shifting to Neutral?

No, you don't have to. While driving, you can shift to neutral without pressing the clutch, regardless of which gear you're in. In fact, this already achieves complete gear disengagement. Additional information: 1. The clutch is used during the moment of engagement or in semi-engaged conditions. Keeping the clutch pressed for extended periods can cause wear, so neutral coasting involves pressing the clutch, shifting to neutral, releasing the clutch, and coasting. However, modern vehicles with electronic fuel injection generally don't recommend neutral coasting as it consumes more fuel. 2. Method for shifting to neutral without pressing the clutch: Lift off the accelerator. Gently push the gear lever - just light pressure with two fingers is usually enough to shift into neutral, but avoid using excessive force.
4
3
Share

What are the symptoms of insufficient clutch fluid in a car?

When the clutch fluid is insufficient, it affects the depression of the clutch pedal, preventing the clutch disc from fully disengaging. Here is an introduction to the effects of insufficient clutch fluid: 1. If the clutch fluid is insufficient, the clutch may not completely disengage even when the clutch pedal is fully depressed, leading to difficulty in shifting gears or even the inability to shift. Additionally, it can accelerate the wear of the clutch disc. 2. Over time, the clutch disc will naturally wear out, but poor usage habits can speed up this process. 3. Insufficient clutch fluid can result in poor mechanical operation, sluggish or soft clutch response, or even complete failure. You may also experience abnormal sensations when pressing the clutch pedal.
9
2
Share

How to Distinguish Between China 4 and China 5 Standards?

China 4 and China 5 vehicle distinctions are as follows: 1. For vehicles that have already obtained the environmental protection inspection compliance label, the emission standard can be checked on the original or duplicate of the label. Alternatively, you can log in to the Motor Vehicle Environmental Protection Website and enter the vehicle model and engine model in the new vehicle compliance query system. 2. According to the national plan, the China 6 emission standard is scheduled to be implemented on July 1, 2020, only three years after the full implementation of the China 5 standard. In key regions such as Beijing-Tianjin-Hebei and surrounding areas, the Yangtze River Delta region, the Fenwei Plain, the Pearl River Delta, and the Chengdu-Chongqing region, the China 6 emission standard will be implemented ahead of schedule. 3. Compared to the current China 5 standard, the China 6 standard raises the threshold by nearly 50%, and it is slightly higher than the current international strictest emission limit—the Euro 6 standard. Once the China 6 standard is officially implemented, it will become the strictest motor vehicle emission standard in the world.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.