Where is the Bluetooth switch in the old Santana model?

1 Answers
AdrianaLee
07/30/25 6:10am
The Bluetooth switch in the old Santana model is located in the car display applications. Here are the specific details about the Santana: 1. Configuration: The Santana series is equipped with RKA tire pressure monitoring devices as standard, along with safety features such as ESP body dynamic electronic stability system, HBA emergency braking assist system, and ASR traction control system. 2. Power: It is powered by a 1.5L naturally aspirated engine. The National V version has a maximum power of 81kW (110PS) and a peak torque of 150N·m, while the National VI version offers a maximum power of 82kW (111PS) and a peak torque of 145N·m. It is paired with either a 5-speed manual or 6-speed automatic transmission.
Was this review help?
11
1
Share
More Forum Discussions

What does the AC button in a car's air conditioning system mean?

Car air conditioning AC button refers to the air conditioning cooling switch, which is the power switch for the air conditioning compressor. How to use car air conditioning buttons: 1. Front windshield defrost and rear windshield defrost: A fan shape with an upward curved arrow, marked with 'front', activates the front windshield defrost function, while 'rear' indicates the rear windshield defrost function; 2. Car air conditioning airflow direction: An arrow pointing to the head means air blows upward, while pointing to the feet means air blows downward; 3. Seat heating: A chair with a curved arrow pattern indicates seat heating function, while a small fan symbol indicates seat ventilation function; 4. Car air conditioning vents: Used to control air volume and direct or diffused airflow.
14
0
Share

What is the Function of an Automotive Mass Air Flow Sensor?

The function of an automotive mass air flow sensor is to monitor the volume of air entering the engine and convert this intake air information into electrical signals transmitted to the electronic control unit (ECU). The ECU uses this signal to determine the engine's fuel injection quantity. The mass air flow sensor significantly impacts the engine's power performance. Common causes of mass air flow sensor failure include prolonged use of unchanged or low-quality air filters, leading to excessive dust accumulation on the sensor's hot wire. This results in inaccurate or failed resistance values, and the accumulated dust can also cause throttle body contamination. Symptoms of a faulty mass air flow sensor include unstable idle, poor acceleration, increased fuel consumption, lack of power at high speeds, black smoke from the exhaust pipe, and excessive tailpipe emissions.
6
5
Share

How Often Should the Car Air Filter Be Replaced?

The car air filter should be replaced approximately every 20,000 kilometers. The air filter, also known as an air filter cartridge, air cleaner, or air element, is primarily used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating environments. During operation, the engine inhales a large amount of air. If the air is not filtered, the dust suspended in the air can be drawn into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe "cylinder scoring," which is particularly problematic in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders.
19
3
Share

Which Volkswagen model is the Bora?

bora is the Volkswagen Bora. Taking the 2021 Volkswagen Bora Elite Smart Edition as an example, it belongs to the compact car category with body dimensions of: length 4663mm, width 1815mm, height 1462mm, and a wheelbase of 2688mm. The body structure is a 4-door, 5-seater sedan with a fuel tank capacity of 50 liters. The 2021 Volkswagen Bora Elite Smart Edition is equipped with a 1.2L turbocharged engine, with a maximum power speed of 5000rpm and a maximum torque speed ranging from 2000 to 3500rpm, paired with a 7-speed dual-clutch transmission.
8
3
Share

How Much Does the Range Decrease After Removing the Speed Limit on an Electric Vehicle?

Different vehicles will experience varying degrees of range reduction after removing the speed limit, and it is generally not recommended to do so. Although electric vehicles can achieve higher speeds after removing the speed limit, the required current also increases, which can easily lead to the formation of lead sulfate crystals inside the battery. This results in a gradual decline in capacity and a shortened battery lifespan. Since battery capacity is generally fixed, higher speeds will inevitably reduce the driving range. Reasons for Setting Speed Limits: The speed limit on electric vehicles is set by manufacturers based on safety considerations, and it is not advisable for riders to remove it. Moreover, from the perspective of the overall performance of electric vehicles, increasing the speed is not recommended. Due to cost constraints, the comprehensive performance of electric vehicles is designed only for low-speed commuting. Higher speeds cannot meet safety requirements in terms of frame stability, braking performance, handling, and the rider's operational skills. Hazards of Removing the Speed Limit: It damages the overall lifespan of the electric vehicle; after removing the speed limit, without upgrading the braking system, tires, etc., the risk factor increases significantly; electric vehicles are not designed for high-speed operation, and removing the speed limit poses a risk of disintegration when severely exceeding the speed limit.
4
1
Share

How Much AdBlue Should Be Added at a Time?

Typically, AdBlue needs to be refilled every 2,000 kilometers, with 3 to 5 liters of AdBlue used per 100 liters of diesel fuel. The consumption of AdBlue is approximately 3% to 5% of the fuel consumption. AdBlue is a liquid used in SCR (Selective Catalytic Reduction) technology to reduce nitrogen oxide (NOx) emissions from diesel vehicles. It consists of 32.5% high-purity urea and 67.5% deionized water. Reasons for Adding AdBlue to Vehicles: The primary harmful substances in diesel vehicle exhaust are nitrogen oxides (NOx) and particulate matter (PM). While engine technology can reduce particulate emissions, NOx remains a major concern. AdBlue is injected into the exhaust after-treatment system, where it decomposes into ammonia (NH3) at high temperatures. In the presence of a catalyst, ammonia reacts with NOx to form harmless nitrogen (N2) and water (H2O). Therefore, the main purpose of adding AdBlue to diesel vehicles is to reduce harmful exhaust emissions. Precautions for Using AdBlue Solution: AdBlue solution is generally harmless to humans. If it comes into contact with the skin, simply rinse thoroughly with soapy water or clean water. If it accidentally splashes into the eyes, lift the eyelids and rinse immediately with clean water. If ingested in large quantities, seek medical attention promptly. In high-temperature environments, AdBlue solution may release ammonia gas, which can corrode and irritate skin tissues. Prolonged exposure to ammonia may cause skin pigmentation or finger ulcers in some individuals. If such symptoms occur, medical treatment is necessary.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.