Where is the Bluetooth in the old CRV?

1 Answers
Una
07/29/25 11:02pm
In the "Bluetooth/Wi-Fi" settings interface, click on "Bluetooth Device List". Previously paired phones will automatically appear in the list. Click on the phone you want to connect to and select the connection method. You can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can make calls through the car's audio system. Here is how to connect Bluetooth in the old CRV: 1. Turn on the Bluetooth on your smartphone. 2. Perform the following operations on the host: Click Settings -- Click Bluetooth -- Set the Bluetooth On/Off status to "On" -- Click Bluetooth Device List -- Add Bluetooth -- Device Click OK -- Select Device. 3. At this point, a Bluetooth pairing request prompt box will pop up on your smartphone. Click "Pair". 4. Wait until the host screen displays "Pairing Successful".
Was this review help?
6
2
Share
More Forum Discussions

What kind of water should be added to car windows?

Car windows should be filled with windshield washer fluid. Windshield washer fluid refers to a super-concentrated cleaning agent for car windows, which has functions such as anti-stickiness, anti-static, anti-corrosion, dustproof, cold resistance, acid rain resistance, antifreeze, and UV protection. Car windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Car windshield washer fluids are categorized into: 0°C fluid for summer use, -20°C and -35°C fluids for winter use. The method for adding windshield washer fluid to a car is: 1. Open the front hood; 2. Locate the washer fluid reservoir, open the cap, and add the fluid.
13
0
Share

What to Do When the Car's Water Temperature Is Too High?

The solution to a high car water temperature is: Do not turn off the engine, open the hood, and pour water over the radiator to quickly lower the temperature. During engine operation, the normal water temperature should be around 90 degrees. The reasons for high car water temperature include: 1. Insufficient coolant; 2. Faulty cooling fan; 3. Faulty water pump; 4. Faulty thermostat. The consequences of high car water temperature include: 1. Accelerated engine wear and reduced lubrication effectiveness of the oil; 2. Risk of radiator bursting due to excessive heat; 3. Increased engine block temperature, prolonged high temperatures can cause deformation or damage to the cylinder head and block.
5
4
Share

What to Do When a Mercedes Car Key Runs Out of Battery?

When a Mercedes car key runs out of battery, the solution is to replace the battery. The replacement method is as follows: 1. Press the button on the car remote key to remove the mechanical key; 2. Insert a tool into the hole at the back of the key and gently pry it open; 3. Open the back cover and remove the old battery for replacement. Models under the Mercedes brand include: Mercedes A-Class, Mercedes S-Class, Mercedes G-Class, Mercedes C-Class, Maybach, etc. Taking the Mercedes C-Class as an example, its body dimensions are: length 4784mm, width 1810mm, height 1457mm, wheelbase 2920mm, fuel tank capacity 66l, and it is equipped with a 1.5T turbocharged engine.
17
0
Share

Where is the battery located in the Mercedes-Benz R350?

The battery of the Mercedes-Benz R350 is located under the front passenger seat. The functions of the battery are: 1. When the generator is overloaded, it can assist the generator in supplying power to electrical equipment; 2. When the generator is not generating electricity or the voltage is low, it supplies power to electrical equipment; 3. It can convert part of the electrical energy into chemical energy for storage. The Mercedes-Benz R350 is a mid-to-large-sized MPV with body dimensions of: length 5157mm, width 1922mm, height 1674mm, wheelbase 3215mm, and a fuel tank capacity of 80 liters. It is equipped with a 3.5L naturally aspirated engine with a maximum power output of 200kW.
11
3
Share

What Causes the Noise When Shifting into Reverse Gear?

The reasons for noise when shifting into reverse gear are: 1. Damage to the reverse gear synchronizer; 2. Friction between gears during shifting; 3. Damage to the reverse gear bearing or poor bearing lubrication; 4. The clutch is not fully depressed; 5. Loose linkage mechanism; 6. Severe wear of the clutch disc; 7. Incomplete gear engagement. The solutions for noise when shifting into reverse gear are: 1. Replace the reverse gear synchronizer; 2. Lubricate all gears; 3. Replace the reverse gear bearing; 4. Fully depress the clutch before shifting; 5. Inspect the linkage mechanism; 6. Replace the clutch disc. Precautions when shifting into reverse gear include: 1. Ensure the vehicle is completely stopped before shifting; 2. Fully depress the clutch; 3. Reverse slowly.
10
4
Share

How to Reset the Maintenance Light on the New Santana?

New Santana maintenance light reset method is: 1. Turn off the ignition switch; 2. Press the right button on the instrument panel while turning on the ignition switch; 3. Press the left button on the instrument panel to reset. The Santana is a compact car with body dimensions of: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, and a fuel tank capacity of 52.8L. The Santana is equipped with a 1.5L naturally aspirated engine, with a maximum power of 82kW at 6100rpm, a maximum torque of 145Nm, and is paired with a 5-speed manual transmission.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.