Where is the Bluetooth in the Land Rover all-English system?

1 Answers
Tyra
07/29/25 8:30pm
To find the Bluetooth in the Land Rover all-English system, locate 'bluetooth' on the central control screen and select to turn it on. Activate the Bluetooth devices on both your phone and the car: To establish a pairing relationship between your phone and the car's Bluetooth device, enable the Bluetooth function on both devices and set your phone's Bluetooth to 'visible to all' in the settings. Pairing and connection: Search for Bluetooth devices on your phone, select the car's Bluetooth device once found, and pair using the password '0000'. The connection is successful once pairing is complete. Usage after successful connection: Once the car's Bluetooth is successfully paired with your phone's Bluetooth, you can make and receive calls. You can also play music on your phone and enjoy it through the car's Bluetooth device.
Was this review help?
4
3
Share
More Forum Discussions

How many coolant temperature sensors does the Malibu have and where are they located?

The Malibu has one coolant temperature sensor, located at the connection point between the upper hose and the cylinder head or at the thermostat. A temperature sensor (temperature-transducer) refers to a sensor that can detect temperature and convert it into an available output signal. Temperature sensors are the core component of temperature measurement instruments, with a wide variety of types. According to the measurement method, they can be divided into contact and non-contact categories, and based on the characteristics of sensor materials and electronic components, they are classified into thermistors and thermocouples. The functions and composition of the coolant temperature sensor are as follows: 1. Function: The coolant temperature sensor is installed on the engine block or cylinder head water jacket, in direct contact with the coolant, to measure the temperature of the engine coolant. The electronic control unit detects the temperature of the engine coolant based on this change—the lower the temperature, the greater the resistance; conversely, the smaller the resistance. The electronic control unit uses this change to measure the engine coolant temperature as a correction signal for fuel injection and ignition timing. 2. Composition of the automotive coolant temperature sensor: Its interior consists of a semiconductor thermistor—the lower the temperature, the greater the resistance; conversely, the smaller the resistance. The electronic control unit uses this change to measure the engine coolant temperature as a correction signal for fuel injection and ignition timing.
3
0
Share

How to Unlock the Steering Wheel of Zhonghua V3?

The method to unlock the steering wheel of Zhonghua V3 is to gently turn the steering wheel left and right while turning on the ignition lock. Below is some related information about the Zhonghua V3: 1. Interior: The Zhonghua V3 is equipped with a three-spoke multifunction steering wheel, and the instrument cluster adopts an integrated barrel-type design, with a central LCD screen displaying vehicle information. As for the center console, the design of the Zhonghua V3's center console is well-structured. The polygonal air vent style at the top echoes the shape around the LCD screen on the center console. The multimedia control buttons and air conditioning knobs at the bottom are clearly functional, with no complicated buttons. 2. Powertrain: The Zhonghua V3 offers two powertrain options for consumers to choose from: a 1.5L engine and a 1.5T engine. The 1.5L engine has a maximum output power of 107 horsepower and a peak torque of 145 N·m, while the 1.5T engine has a maximum output power of 150 horsepower and a peak torque of 220 N·m. The transmission system is matched with either a 5-speed manual or a 5-speed automatic transmission.
8
1
Share

Should SUVs Use 92 or 95 Octane Gasoline?

SUVs can use 92 octane gasoline. This octane rating is recommended in the vehicle's official owner's manual. In addition to checking the appropriate gasoline grade in the owner's manual, the fuel filler cap will also indicate the recommended octane rating. Typically, the octane rating can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is higher, 98 octane gasoline is recommended. However, with the application of new technologies, the octane rating cannot be solely determined by the compression ratio. High-compression engines can also be tuned to use lower-octane gasoline because factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If an SUV occasionally uses the wrong octane rating, simply switch back to the correct one after the current tank is used up. However, long-term use of the wrong octane rating can have the following effects: For vehicles designed for lower octane ratings, using higher octane gasoline will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher octane ratings, using lower octane gasoline can cause engine knocking. Because the octane number is significantly lower, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will be generated during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring in severe cases.
14
5
Share

What is the minimum ground clearance of the Honda Jade?

The minimum ground clearance of the Honda Jade is 195 millimeters. The minimum ground clearance of the Jade refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance improves the Jade's off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Honda Jade is a station wagon produced by Honda, featuring a redesigned front bumper for a more sporty appearance. The dimensions of the Jade are 4667 mm in length, 1775 mm in width, and 1530 mm in height, with a wheelbase of 2760 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Jade's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's intended use and road conditions. For urban driving on well-paved roads, a vehicle with lower ground clearance may offer better stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance is advisable to enhance off-road performance and prevent underbody damage.
19
3
Share

What brand of transmission is used in the Geely Vision X6?

The transmission manufacturer for the Geely Vision X6 is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Geely Vision X6 uses either a 6-speed automatic manual transmission or a 6-speed manual transmission. The automatic manual transmission has eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission with the addition of manual shifting functionality. The purpose of this transmission is to enhance the driving pleasure of automatic vehicles. When using the Geely Vision X6's transmission in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission models, many experienced drivers may coast in neutral, but for automatic transmission models, this can cause overheating and potential jolts when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, aiming for smooth operation, may shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other failures. Avoid frequently climbing steep slopes in Drive (D). When tackling steep inclines, automatic transmission vehicles may overheat due to high load or shift prematurely, resulting in insufficient power. In such cases, using manual mode to lock in lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N). Towing ropes or direct towing should not be used.
13
2
Share

How to Renew Vehicle License on Traffic Management 12123?

Log in to "Traffic Management 12123", go to the business center to apply for a replacement or renewal of the vehicle license, enter the business process for replacement or renewal of the vehicle license, and apply for the replacement or renewal of your own registered vehicle license. Enter the vehicle information confirmation page, including the type of license plate, license plate number, and vehicle status. Users can choose the type of service, reason for application, and method of collection as needed, and can choose between postal delivery or self-pickup at a service center. Click the "Get Verification Code" button, the system will send an SMS verification code to your phone. Enter the SMS verification code received on your phone, pass the verification, and complete the submission of the replacement or renewal application.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.