Where is the Bluetooth in the 2012 Audi Q5?

2 Answers
DelElliott
07/24/25 10:52am
2012 Audi Q5 Bluetooth is located in the music interface of the central multimedia system. When selecting the playback source, the Bluetooth option will be displayed. There is also a connection option in the phone section. Steps to connect Bluetooth for playing music in the 2012 Audi Q5: Press the MEDIA button in the car, click "Applications" in the lower right corner of the screen, then select "Bluetooth Music." At this point, a music playback interface with a Bluetooth logo in the middle will appear on the screen. Turn on your phone's Bluetooth, search and connect. Once the phone's Bluetooth and the car's Bluetooth are successfully paired, you can play music from your phone. Solution if the Bluetooth function cannot be found in the Audi Q5: The Audi Q5 itself has Bluetooth functionality. If it is not available, you can have it installed at a 4S store. The Bluetooth in the Audi Q5 is located in the navigation system. There is a navigation connection option. Select "media" on the MMI control panel, then choose "Setup." The screen will display an option where you can enter and select to connect Bluetooth. After pairing, it can be used normally.
Was this review help?
3
4
Share
LaDavid
08/11/25 5:54am
As a long-time Audi owner who has driven several Q5 models including the 2012 version, here's how Bluetooth works: The setting is located in the MMI multimedia system. After starting the vehicle, press the 'TEL' button on the center console, then navigate to 'Settings' or 'Bluetooth Device Management' to add a new phone. Make sure your phone's Bluetooth is turned on and set to discoverable mode. During pairing, the system will display a passcode that you'll need to confirm on your phone. If you can't find the option, don't worry - it might be due to outdated software, and a system update should resolve this. Note that this vehicle's Bluetooth only supports phone functions, not music streaming, so you'll need to use an AUX cable or upgrade to a newer system for music playback. I've experienced connection issues before, and usually restarting the vehicle's electronics (by holding the power button for a few seconds) or consulting the user manual helps. Environmental interference from too many electronic devices can also affect connectivity - try moving to a different location. Just be patient and follow the steps carefully. Regular system maintenance is recommended to prevent accumulated issues.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What are the purchase conditions for the Ferrari LaFerrari?

Must have a net worth of over 50 million, no record of reselling Ferraris, and have purchased 5 Ferraris. Here is some extended information about the Ferrari LaFerrari: 1. History: The LaFerrari is a flagship supercar launched by Ferrari, known as one of the three hypercars. The English name for LaFerrari is LaFerrari. The LaFerrari first debuted at the Geneva Motor Show in March 2013. The LaFerrari is the successor to the Enzo. The LaFerrari is a limited-edition model, with only 499 units produced. There is only one model of the LaFerrari – the 2014 6.3L standard. 2. Vehicle Features: The LaFerrari is positioned as a grand tourer. In terms of dimensions, it measures 4702x1992x1116mm (length x width x height), with a wheelbase of 2650mm. The LaFerrari is a hybrid electric vehicle. It combines a 6.3-liter V12 naturally aspirated engine with an electric motor. The engine delivers a maximum power of 588KW and a maximum torque of 700N・m, with direct fuel injection and rear-wheel drive.
10
0
Share

Is the Binrui Fuel-Efficient?

Binrui is fuel-efficient. Here is some relevant information about the Binrui: 1. Simple and stylish interior: The silver chrome-plated center console is exquisite and delicate; the 10.25-inch oversized display screen is full of technological appeal; the leather-wrapped multifunctional flat-bottom steering wheel offers an excellent grip. Additionally, its seats are not only soft and comfortable but also feature natural tea fragrance and heating functions. 2. Safety: It boasts an L2-level intelligent driving technology, which is typically exclusive to luxury cars, and the Binrui 200T surpasses its peers in terms of configuration. The Binrui 200T also provides multiple safety features for secure driving, including the ACC adaptive cruise control system, ICC intelligent navigation system, LKA lane-keeping assist system, AEB-P city pre-collision safety system, and IHBC intelligent high-beam control system. These features not only enhance the driving experience but also offer all-weather, all-road condition safety protection for the owner. 3. Low fuel consumption: The G-power200T mid-mounted direct-injection turbocharged engine in the Binrui 200T has been meticulously designed. This engine incorporates technologies such as high-pressure direct injection, dual variable valve timing, integrated exhaust manifold in the cylinder head, and an all-aluminum cylinder block, enabling the Binrui 200T to achieve top-tier fuel atomization efficiency, with a fuel consumption of only 5L per 100 kilometers.
13
5
Share

Is it necessary to change the engine oil within a year?

It is not mandatory to change the engine oil if it has been over a year, and you can still drive temporarily. However, it is necessary to promptly visit a qualified maintenance facility to replace the engine oil and oil filter to prevent the decline in the lubrication, cooling, sealing, and cleaning functions of the oil, which could cause engine damage. Below are specific details about the functions of engine oil: 1. Lubrication: Dry friction between metal surfaces can cause damage to the metal parts, so the lubricating effect of engine oil is needed for protection. With the lubrication of engine oil, metal parts do not come into direct contact but float on the lubricating oil. This is commonly referred to as the 'oil film bearing' effect. 2. Cleaning: After prolonged operation, the engine may inevitably shed metal burrs due to friction. If these burrs fall off, they could threaten other metal surfaces. Therefore, the flushing action of the engine oil is necessary to 'carry away' these metal burrs. 3. Cooling: The interior of the engine operates at high temperatures, with the cylinders relying on the cooling system for cooling. However, certain internal components cannot rely on the cooling system and instead depend on the circulation of engine oil to dissipate heat. 4. Rust prevention: Additionally, engine oil isolates metal surfaces from the air, ensuring that the internal metals of the engine do not oxidize or rust.
4
4
Share

What does the Audi warning on the dashboard mean?

Audi warning on the dashboard means rear-end collision warning. Under system-available conditions, the front pre-sense system issues warnings and applies corresponding braking based on the situation and vehicle speed when there is a risk of collision with stationary, temporarily stopped, or moving vehicles or pedestrians. If not recognized, the front pre-sense system will not respond. Below is an introduction to the pre-sense system: 1. Working principle: The pre-sense system uses radar sensor data to calculate the probability of an accident. Within the system's operable range, it can detect collision risks with vehicles or pedestrians. In such cases, the system warns the driver through visual and audible signals, and may also apply brake jolts. If necessary, it may apply partial or full braking to reduce impact speed or avoid a potential collision. In vehicles equipped with the basic version of the pre-sense system, the front seat belts are additionally tensioned in reverse as needed. Even after turning off the adaptive cruise control system, the Audi front pre-sense system remains active. 2. Function: The pre-sense system issues a severe warning through a brake jolt when facing a collision risk with a vehicle. If the driver does not respond to this emergency warning, the front pre-sense system will progressively increase braking force within system-allowed limits, thereby reducing speed in case of a potential collision. 3. Do not overly rely on the pre-sense system: The front pre-sense system cannot exceed physical limits. It is an auxiliary system and cannot prevent collisions under all circumstances. The driver must always intervene and brake in time. Do not take risks while driving just because this system improves safety, as this could lead to accidents.
11
0
Share

Can You Still Drive with Excessive Oil Pressure?

If the oil pressure warning light comes on while driving, indicating excessive oil pressure, it is recommended not to continue driving. Continuing to drive may cause further damage to the engine. You should pull over and check the oil level first, then contact a repair shop for assistance. More detailed information is as follows: 1. Causes of excessive oil pressure include: high oil viscosity, blockage in the main oil passage, blockage in the cylinder block, or a clogged oil filter. 2. During normal engine operation: if the oil gauge reading exceeds the specified value, power decreases, and sometimes the sensor or oil filter housing may be damaged, it is advised to remove the filter. 3. Check if the filter element is too dirty or clogged: or if the bypass valve spring is too strong to open, leading to excessive oil pressure. 4. Check if the pressure relief valve spring is too tight: or if the spring is too strong to open. In some models, if the pressure relief valve piston is stuck, it may also fail to lift, causing excessive oil pressure. 5. Check if the oil passage in the cylinder block leading to the crankshaft bearing is blocked: if the above checks show no abnormalities, inspect whether the oil passage in the cylinder block leading to the crankshaft bearing (except for newly assembled engines) is blocked. A blocked oil passage can easily cause high oil pressure and bearing failure.
4
5
Share

What is the 0-100 km/h acceleration time of the Enclave?

According to official data, the Enclave's 0-100 km/h acceleration time is 9.1 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the greater the force pushing the vehicle, and naturally, the faster the acceleration. The Audi R8 has a maximum torque of 570 Nm, achieving 0-100 km/h in 3.1 seconds. The Audi A6 3.0T has a torque of 500 Nm, achieving 0-100 km/h in 5.6 seconds. Transmission efficiency: The transmission is the medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi A6's transmission is a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Audi R8 has a power-to-weight ratio of 373 Hp/T, achieving 0-100 km/h in 3.1 seconds. The Audi A6 has a power-to-weight ratio of 171 Hp/T, achieving 0-100 km/h in 5.6 seconds.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.