Where is the Bluetooth button on the 2014 Buick GL8?

1 Answers
SanAngela
07/29/25 3:47pm
The Bluetooth button for the Buick GL8 can be selected from the menu. Here are the relevant details: 1. Car Bluetooth Phone: This is an in-vehicle wireless hands-free system designed based on wireless Bluetooth technology. Its function is to automatically recognize mobile phones, allowing connection without the need for cables or phone holders. The driver can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system. 2. Additional Information: If the pairing code is entered correctly, the car's Bluetooth will soon display 'Connected.' Test the car Bluetooth by making a call; if successful, you will hear the call audio.
Was this review help?
10
2
Share
More Forum Discussions

How to Turn Off the Auto Start-Stop System in Honda Avancier?

Avancier auto start-stop function deactivation method: Press the auto start-stop OFF button (circular arrow button containing the letter A) to deactivate the engine auto start-stop function. Introduction to Avancier: 1. Powertrain: Equipped with two engines - a 1.5L turbocharged engine and a 2.0L turbocharged engine. 2. Features: The Avancier comes with practical functions such as one-touch engine start, electronic parking brake, seat heating, reversing radar, and vehicle stability system. It also offers comfort and technological configurations including rear automatic air conditioning, center armrest entertainment system control panel, and rear sunshade.
5
2
Share

How to Turn on the Heater in BYD Song Pro?

First, locate the air conditioning button, press the switch, then rotate the round knob on the right side to increase the temperature—the air blown out will be warm air. Introduction to Song Pro: 1. Body dimensions: The length, width, and height are 4650mm, 1860mm, and 1700mm respectively, with a wheelbase of 2712mm. 2. Powertrain: Equipped with a 1.5T turbocharged engine paired with a 6-speed manual transmission. This engine delivers a maximum power of 118kW and a peak torque of 245Nm. The engine also features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
1
3
Share

Is the Roewe i5 compliant with China 6 emission standards?

The Roewe i5 complies with the China 6 emission standards. The China 6 standard refers to the 'National Sixth Stage Emission Standards for Motor Vehicles'. Introduction to the Roewe i5: 1. Powertrain: It is equipped with two engines, one is a 1.5-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine delivers a maximum horsepower of 120 hp and a maximum torque of 150 Nm; the 1.5-liter turbocharged engine produces a maximum horsepower of 169 hp and a maximum torque of 250 Nm. 2. Suspension: The front suspension utilizes a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
1
3
Share

How to Install a Vehicle License Plate?

Prepare the license plate and the necessary tools for installation, such as license plate screws, license plate fasteners, screws, screwdrivers, etc. Clean the area where the license plate will be installed. If you want to add a license plate frame, purchase one from an auto detailing shop. Check if the clips at the license plate installation position are intact. If any are missing, replace them promptly to facilitate installation. Place the license plate frame along with the license plate number smoothly into the installation position, adjust and level it properly. Once the plate is positioned correctly, take out the screws and tighten them with a screwdriver.
9
5
Share

Where is the license plate Gui B from?

Gui B is the license plate of Liuzhou, Guangxi. Here is a related introduction to the license plate numbers of other places in Guangxi: 1. Nanning → Gui A. 2. Liuzhou → Gui B. 3. Guilin → Gui C. 4. Wuzhou → Gui D. 5. Beihai → Gui E. 6. Chongzuo → Gui F. 7. Laibin → Gui G. 8. Guilin → Gui H. 9. Hezhou → Gui J. 10. Yulin → Gui K. 11. Baise → Gui L. 12. Hechi → Gui M. 13. Qinzhou → Gui N. 14. Fangcheng → Gui P. 15. Guigang → Gui R.
19
3
Share

Where to Place ETC in the Car?

The installation position of ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the middle to lower part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with built-in or later-added explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC is the abbreviation of Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the owner needs to provide the original and photocopy of their valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent must also bring their valid ID card. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large rearward tilt angle of the windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spot. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In this case, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll payment for the preceding vehicle. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information and cause toll deduction failure. When using a debit card linked to ETC, insufficient balance may also lead to toll deduction failure.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.