Where is the blower resistor located in the Nissan Tiida?

What does it mean when a bulb with an exclamation mark appears on the dashboard?

A yellow bulb with an exclamation mark is the light fault indicator, indicating that there is a malfunction with one of the vehicle's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. The exclamation mark is a common fault indicator in vehicles. Besides the yellow bulb with an exclamation mark, there are four other forms of exclamation mark indicators: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a circle with brackets, and an exclamation mark with a horizontal line under brackets. Below is a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a malfunction with the vehicle's general performance, components, or functions. Possible issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a malfunction in the transmission or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with brackets. This represents a brake system warning, primarily indicating a malfunction in the brake system or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: An exclamation mark with a horizontal line under brackets. This represents the tire pressure monitoring warning light, which lights up when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range.

4

Share

Can a temporary ID card be used for the Subject 2 driving test?

A temporary ID card can be used, as temporary resident identity cards have legal validity in proving a citizen's identity. Below are precautions for the Subject 2 test: 1. Pay attention to attire and mindset before the test. Remember key points when reversing into the garage, avoiding unnecessary left and right turns. 2. For parallel parking, ensure the rear wheels pass the edge line of the parking space, adjust the distance properly, remember to use turn signals and honk the horn. For right-angle turns, identify the turning point accurately before steering sharply. 3. During curve driving, make wide turns after entering the curve and maintain steady speed. None of these maneuvers should cross the lines. After completion, drive the vehicle back to the starting position without stalling, and wait for signature confirmation.

12

3

Share

Does a Faulty Canister Purge Valve Increase Fuel Consumption?

A faulty canister purge valve significantly increases fuel consumption. Here are the relevant details: 1. The canister uses activated carbon's adsorption and filtration principle to collect fuel vapors. When the vehicle starts, the canister purge valve opens, releasing the adsorbed fuel vapors into the intake manifold for re-combustion. 2. If the canister purge valve is faulty (leaking), fuel vapors escape into the cylinders before the engine is started, leading to an overly rich air-fuel mixture. This can cause "flooding," resulting in difficulty starting or weak ignition, which consumes a lot of fuel. 3. Additionally, the overly rich mixture leads to incomplete combustion. The engine ECU detects this and adjusts by leaning out the fuel mixture in the next cycle. However, an overly lean mixture also struggles to burn completely, further increasing fuel consumption.

16

1

Share

Which years do National IV vehicles belong to?

The National IV emission standard began in 2010 and lasted until 2018 when the National V standard was implemented. Therefore, vehicles produced between 2010 and 2017 generally comply with the National IV standard. Here is more information about the National IV standard: 1. The National IV standard requires emissions of various pollutants to be approximately 50% lower than those of the National III standard. 2. The National Fourth Stage Motor Vehicle Pollutant Emission Standard, abbreviated as "National IV Emission Standard" or National IV Standard, primarily targets vehicle emission pollutants such as HC, NOx, CO, and PM. Through the application of technologies like the active layer of catalytic converters, secondary air injection, and exhaust gas recirculation systems with cooling devices, it controls and reduces vehicle emission pollutants to levels below specified limits.

5

3

Share

Is Replacing a Car Radiator Considered a Major Repair?

If the car's radiator frame is detachable, then replacing the radiator is not considered a major repair; if the radiator frame is integrated with the car's body frame, then replacing the radiator is considered a major repair. Below is relevant information about replacing a car radiator: 1. Cars use water-cooled engines, which rely on coolant circulating continuously to dissipate heat. Water-cooled engines have a radiator at the front of the car, which is fixed to the radiator frame. 2. The radiator frames of most cars are detachable, while some cars have radiator frames integrated with the body frame. If the radiator frame is integrated with the body frame, replacing the radiator frame would classify the car as a salvage vehicle. 3. For cars where the radiator frame is integrated with the body, replacing the radiator frame requires cutting off the old frame and welding a new one in place, which damages the body frame. If the radiator frame is connected to the body frame with screws, replacing it will have no impact on the car.

6

3

Share

What Maintenance Does a New Car Need?

New car maintenance includes the following items: 1. Replace engine oil, oil filter, fuel filter, and air filter. 2. Check whether the level of the car coolant is in the normal position. 3. Check whether the oil level of the power steering fluid reservoir meets the requirements, and inspect whether there is any oil leakage at the interfaces of the system oil pipes. 4. Check the battery fluid level and the level of the windshield washer fluid reservoir. 5. Inspect the tension and aging condition of the belts for the generator, air conditioner, water pump, and power steering pump. 6. Check whether the front and rear light assemblies of the car are working properly. 7. Inspect the tire pressure and wear condition of the car tires, tighten the tire bolts to the specified torque, replenish the tire pressure to the specified value for the model, and perform tire rotation based on the wear condition.

16

0

Share

Where is the blower resistor located in the Nissan Tiida?

What does it mean when a bulb with an exclamation mark appears on the dashboard?

Can a temporary ID card be used for the Subject 2 driving test?

Does a Faulty Canister Purge Valve Increase Fuel Consumption?

Which years do National IV vehicles belong to?

Is Replacing a Car Radiator Considered a Major Repair?

What Maintenance Does a New Car Need?

Is it necessary to change tires when replacing car wheels?

What are the symptoms of a faulty vacuum booster pump?

What does Tesla dual motor mean?

How to Obtain a D-class Driver's License?