Where is the blower of Dongfeng Peugeot 207 located?

What are the causes and solutions for the Passat's air conditioning not cooling?

The reason why the BMW M6 is rarely seen is due to its insufficient product competitiveness. Here is some extended information about the BMW M series: 1. Design Philosophy: High performance with racing characteristics. 2. Maintenance Knowledge: The 2013 BMW M6 comes with a two-year unlimited mileage warranty, and the maintenance schedule is as follows: first service at 10,000 km or 6 months, second service at 20,000 km or 12 months. Maintenance intervals: every 10,000 km or 6 months. It is recommended to perform a major service after the vehicle has traveled 60,000 km, which includes replacing the engine oil, oil filter, air filter, cabin air filter, fuel filter, brake fluid, and transmission fluid.

13

0

Share

What to Do When Only U-Turn or Left Turn Is Allowed?

This situation constitutes a traffic violation, categorized as 'failing to enter the guiding lane in the required direction of travel.' Traffic police can impose a fine and deduct 2 points from the driver's license. If an intersection only has a U-turn lane and no left-turn lane, it may be because the road intended for left turns is a one-way street or prohibited from entry, making a left turn a violation. Situations where vehicles cannot make a U-turn: 1. Presence of a 'No U-Turn' sign: U-turns are strictly prohibited at intersections with this sign, and violations captured by cameras will result in point deductions and fines. 2. Presence of a 'No Left Turn' sign: Since U-turns generally require the use of the left-turn lane, a 'No Left Turn' sign also implies that U-turns are not allowed. However, if an intersection has both a 'No Left Turn' sign and a clear 'U-Turn Allowed' sign, then U-turns are permitted. 3. The leftmost lane has a straight arrow: Some intersections may not have signs prohibiting U-turns, but if the lane is marked with a straight arrow, it means the lane is for straight-through traffic only, and U-turns are not allowed at such intersections.

1

4

Share

How to Determine if the Car You Bought is New

Here are the methods to determine if a car is new: 1. Check the nameplate on the passenger side, which shows the production date. For domestic cars, it should not exceed 3 months, and for imported cars, it should not exceed six months; otherwise, it's a stock car. 2. Look at the odometer; it should not exceed 50 kilometers. If you suspect the dealership has tampered with the odometer, feel the exhaust pipe for black residue, which indicates the car has been driven more than 50 kilometers. You can also pull out the oil dipstick to check if the oil is murky. 3. Inspect the production date of the tires. There are four consecutive numbers on the tire: the first two digits represent the week of production (i.e., the week of the year), and the last two digits represent the year, e.g., 18 for 2018. For example, 2518 means the tire was produced in the 25th week of 2018. After determining the tire's production date, check if it matches the production date on the passenger side nameplate. 4. Examine the production date of the glass. It should not be later than the car's overall production date. At the lower corner of the car glass, there are many English letters, and at the very bottom, there are small dots and numbers. The dots represent the month, and the numbers represent the year. If the dots are before the number, it indicates production in the first half of the year; subtract the number of dots from 7 to get the production month. If the dots are after the number, it indicates production in the second half of the year; subtract the number of dots from 13 to get the month.

17

3

Share

Can the car be driven if the belt is broken and the water temperature is high?

Do not continue driving. Pull over and contact a tow truck to take the vehicle to a repair shop. The reasons are as follows: 1. Overheating: When the water temperature is too high, the viscosity of the engine oil will thin, reducing lubrication strength. At the same time, high-speed moving parts such as pistons and valves are more prone to deformation, leading to engine power loss. In severe cases, the expanding and deforming pistons can scratch the cylinder walls, and the crankshaft bearings may melt and seize the crankshaft, resulting in unimaginable consequences. 2. Belt breakage: During normal driving, if the engine belt breaks, the car will stall and become unusable. Additionally, the brake system and power steering pump will stop working, posing certain dangers. If the timing belt breaks, the coordination between the pistons and valves will be disrupted, potentially causing the pistons to damage the valves. The repair costs in such cases can be quite high.

13

4

Share

What is the normal temperature for a car engine?

The following is the normal temperature range for a car engine: The normal operating temperature of a car engine is generally between 80°C and 90°C, while some high-performance engines may operate at temperatures above 90°C to 100°C. Below is relevant information about car engine temperature: 1. When the temperature is too high: When the engine temperature is too high, the temperature of the air entering the engine is also higher, resulting in a reduced actual air intake. This decreases the engine's volumetric efficiency, leading to a drop in power and torque, manifesting as insufficient engine power. 2. When the temperature is too low: If the temperature of the air-fuel mixture (or air) entering the cylinders is too low, the quality of the combustible mixture deteriorates, making ignition difficult or combustion slow. This results in reduced engine power, increased fuel consumption, and significantly higher emissions of harmful gases.

18

2

Share

Why does the engine shake for a while after starting? Is it normal?

The reasons for engine shaking after starting are as follows: 1. Excessive carbon deposits: There is too much carbon buildup inside the engine. 2. Ignition system failure: There is a problem with the vehicle's ignition system. 3. Unstable fuel supply: The engine's fuel supply is unstable. 4. Incorrect gas mixture: The air-fuel mixture ratio in the engine is abnormal. 5. Uneven cylinder operation: Engine shaking caused by uneven operation of the engine cylinders. Below is some relevant information about engines: 1. Number of engine cylinders: Common engines include four-cylinder and six-cylinder configurations. Engine cylinder counts range from three-cylinder, four-cylinder, six-cylinder, eight-cylinder, ten-cylinder, to twelve-cylinder engines. Engines can also be categorized by their arrangement: inline, V-type, W-type, and horizontally opposed engines. 2. Engine principle: An engine is a machine that converts other forms of energy into mechanical energy. Modern engines include internal combustion engines, external combustion engines, jet engines, and electric motors.

9

0

Share

Where is the blower of Dongfeng Peugeot 207 located?

What are the causes and solutions for the Passat's air conditioning not cooling?

What to Do When Only U-Turn or Left Turn Is Allowed?

How to Determine if the Car You Bought is New

Can the car be driven if the belt is broken and the water temperature is high?

What is the normal temperature for a car engine?

Why does the engine shake for a while after starting? Is it normal?

What is the minimum and maximum speed for straight-line driving?

Why does the car air conditioner not cool at idle but cools when accelerating?

What is the fuel tank capacity of the BYD Song Plus in liters?

What are the reasons why the BYD S6 won't start?