···
Log in / Register

Where is the blower located in the old Nissan Sylphy?

4 Answers
McElizabeth
07/29/25 4:15pm

The blower is located on the left inner side of the glove compartment on the passenger side. Below is relevant information about the blower: 1. Components: The blower mainly consists of six parts: motor, air filter, blower body, air chamber, base (also serving as an oil tank), and oil drip nozzle. 2. Sliding vane blower: The blower operates with an eccentrically placed rotor inside the cylinder, changing the volume between the vanes in the rotor slots to suck in, compress, and expel air. During operation, the pressure difference of the blower automatically delivers lubrication to the oil drip nozzle, which drips into the cylinder to reduce friction and noise while preventing gas backflow in the cylinder. This type of blower is called a sliding vane blower.

Was this review help?
15
0
Share
EzraDella
08/15/25 4:49am

Regarding the location of the blower motor in older Nissan Sylphy models, based on my years of experience working in the automotive industry, it is typically installed beneath the dashboard on the passenger side, behind the glove compartment. To access it, you'll need to first empty the glove box, then remove several clips or screws to take off the cover panel, after which you can see the blower motor assembly. Remember to disconnect the vehicle battery to avoid electric shock risks before operation, and check if the fuse is blown before unplugging the electrical connector. This location is convenient for maintenance but prone to dust accumulation, which can affect airflow. Regular cleaning of the blades can extend its lifespan. If the fan noise increases or there's no airflow, you can start by checking here for loose electrical connections. The design of older models is simpler, making DIY replacement relatively easier.

Was this review help?
15
4
Share
Expand All
BlakelyFitz
10/12/25 6:36am

I drove the old-generation Sylphy for several years, and the blower motor is located near the front passenger seat, easily visible once the glove box is removed. That time, my fan was making severe abnormal noises, so I replaced it myself. The disassembly process wasn't difficult—there's a small panel below the glove box; just unscrew it and remove it to reveal the blower motor unit inside, connected to wiring. It's best to clear any clutter in the car before working to avoid dropping small parts inside. For routine maintenance, keep it clean—dust buildup reduces airflow, so gently brush it with a soft-bristle brush. If you encounter issues, don't rush to spend money; try this method first—it works well and saves you a trip to the dealership.

Was this review help?
5
3
Share
Expand All
SanMelanie
11/25/25 7:38am

When locating the blower motor on older Nissan Sylphy models, observe safety protocols. It's situated in the front passenger footwell area, requiring glove compartment removal for inspection. Always disconnect the battery before servicing to prevent accidental short circuits. Exercise caution as the fan blades are sharp to avoid finger injuries. The concealed location demands gentle handling - never forcibly pull wiring harnesses during inspection. If the fan shows signs of jamming or abnormal noise (typically indicating bearing wear or dust accumulation), prompt maintenance can prevent escalated damage.

Was this review help?
13
2
Share
Expand All
More Forum Discussions

How to Use Cruise Control in CRV?

The method for using cruise control in Honda CRV is as follows: 1. Press the CRUISE button on the steering wheel. 2. When the vehicle speed reaches above 40km/h, press the –/SET button to initiate cruise control. 3. To set the speed, reach the desired speed, remove your foot from the accelerator pedal, and press the RES/+/SET/- button downward. Release the button to complete the setting and start cruise control. 4. To adjust the speed, use the RES/+/SET/- switch on the steering wheel to increase or decrease the speed. 5. To cancel cruise control, press the CANCEL button or step on the brake pedal. At this point, the CRUISE-CONTROL indicator light will turn off. Relevant information about the cruise control system is as follows: 1. The function of the cruise control system is to automatically maintain the vehicle speed as set by the driver without the need to press the brake pedal, allowing the vehicle to travel at a fixed speed. 2. With this system, when driving on highways for long periods, the driver no longer needs to control the accelerator pedal, reducing fatigue and unnecessary speed changes, which can save fuel.
10
2
Share

Which department is responsible for reviewing and issuing the green and yellow labels for motor vehicles?

Motor vehicles' green and yellow labels are reviewed and issued by the environmental protection department. Relevant information is introduced as follows: According to the vehicle model registered and the environmental protection inspection results of exhaust emissions, they are divided into two types: green environmental protection inspection labels and yellow environmental protection inspection labels. The environmental protection label inspection qualification is referred to as the "environmental protection label." Vehicles issued with green or yellow environmental protection labels are referred to as "green-label vehicles" or "yellow-label vehicles." For gasoline vehicles whose exhaust emissions meet the National I standard or above and diesel vehicles that meet the National II standard or above, green environmental protection labels are issued, while yellow environmental protection labels are issued for the remaining vehicles.
15
3
Share

Does Lamborghini Have Idle Speed?

Lamborghini does have idle speed, which is a traditional design feature of the brand. Here is a relevant introduction to Lamborghini: 1. Powertrain: The renowned 6.2-liter engine has earned Lamborghini countless accolades. It features four valves per cylinder, electronically controlled throttle, variable intake manifold geometry, variable intake and exhaust valve timing, and utilizes two LIE engine control units to separately manage the two banks of the V-type engine. 2. Exterior Design: The use of carbon fiber materials with advanced aerospace technology ensures the body remains robust while further reducing weight. The pointed front-end design enhances aerodynamic efficiency, and the large square mesh air intakes on both sides provide additional cooling air for the brakes.
3
1
Share

What Causes the Chevrolet Cruze to Shake, Gasp, and Stall During Cold Starts?

Chevrolet Cruze shaking and stalling during cold starts is mainly due to a faulty coolant temperature sensor or poor fuel injector atomization/partial clogging. Here's relevant information about the Cruze: 1. Cruze Overview: The Chevrolet Cruze is General Motors' next-generation compact car developed with global resources, aiming to set benchmarks in design and performance. This model may be domestically produced by Shanghai GM next year to compete in the intense compact car market. 2. Cruze Chassis and Powertrain: The groundbreaking design of the capable Chevrolet Cruze goes beyond surface aesthetics. Key systems including body structure, suspension, safety features, and electrical systems were developed by integrating GM's strongest global R&D capabilities.
9
4
Share

Does a car need refrigerant refill?

The car's air conditioning system requires refrigerant (Freon) refill. When the AC operates continuously but bubbles persist in the sight glass of the AC pipeline, it indicates insufficient refrigerant level. Refrigerant replenishment is needed under these two scenarios: 1. If the air vent temperature cannot drop below 16°C. 2. When achieving below 16°C takes excessively long (over 5-6 minutes). Precautions: Before refilling, always check for leaks using manifold gauge set to measure high/low pressures. Poor cooling performance usually indicates refrigerant leakage, which should be inspected promptly.
8
3
Share

What are the reasons for the Audi A6 displaying a starting system malfunction?

Audi A6 displaying a car starting system malfunction may be due to the vehicle's body position being too low. Here is the relevant information: 1. Specific reasons: If the dashboard shows a warning light, a green light indicates that the current body position is too low, while a yellow light indicates a fault in the air suspension system; this could also be caused by the starting switch being activated for too short a time. 2. Audi car dimensions: Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of length 5038mm, width 1886mm, height 1475mm, a wheelbase of 3024mm, and a fuel tank capacity of 73l. The 2020 Audi A6 features a front suspension with a five-link independent suspension and a rear suspension with a five-link independent suspension. It is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 190ps, a maximum power of 140kw, and a maximum torque of 320nm, paired with a 7-speed dual-clutch transmission.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.