Where is the blower located in the Nissan Sylphy?

1 Answers
IsabelLee
07/29/25 10:02pm
The blower of the Nissan Sylphy is located on the inner left side of the glove compartment in the front passenger seat. Reasons why the car blower does not rotate are as follows: Long-term use of the blower, excessive dust accumulation: This increases the friction coefficient between the rotor and the bearing, causing the rotor to be obstructed or even stuck, leading to overheating and damage of the coil. After disconnecting the power, open the rear cover of the blower and add a few drops of lubricating oil (such as sewing machine oil) into the bearing sleeves at both ends of the rotor. While adding oil, rotate the blades until they move freely, and the blower fault can be resolved. No 220V AC input or the coil is damaged: In this case, the power should be cut off. Disconnect the two lead wires of the blower from the power supply connection points and leave them suspended (ensure the two ends of the power wires do not touch each other to avoid a short circuit). Turn on the power and carefully measure both ends of the power wires with a test pen. If one end lights up and the other does not, it indicates the power input is normal, and the blower coil may be damaged. If both ends light up or neither lights up, it indicates an issue with the power input.
Was this review help?
14
1
Share
More Forum Discussions

How to adjust the steering wheel of Haval F7?

Haval F7 steering wheel adjustment method is as follows: 1. Release the adjustment lever under the steering wheel; 2. Adjust the steering wheel to align with the driver's chest and ensure that all gauges and indicator lights on the instrument panel are visible; 3. After adjustment, retract the adjustment lever to lock the steering wheel. The Haval F7 is a compact SUV with body dimensions of 4620mm in length, 1846mm in width, and 1690mm in height, and a wheelbase of 2725mm. This car is equipped with two engines, one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine, both matched with a 7-speed dual-clutch transmission.
11
0
Share

What are the behaviors of excessive car maintenance that can damage the vehicle?

Excessive car maintenance behaviors that can damage the vehicle include: 1. Over-washing the paint surface, which can shorten the lifespan of the car paint and even cause the paint to lose its luster when washed under strong sunlight; 2. Polishing and waxing—car wax is essentially a type of abrasive, and polishing wax involves a certain degree of grinding on the car paint to remove minor scratches. Frequent waxing can thin the clear coat on the paint surface, affecting the color and gloss of the paint; 3. Adding too much engine oil during maintenance, which can cause power loss in the engine; the fuel system does not need frequent cleaning. The vehicle requires fuel system cleaning after a certain mileage, but frequent cleaning can cause the cleaning agents to corrode rubber components in the fuel system, leading to leaks.
7
3
Share

What brands are under GAC Toyota?

GAC Toyota's brands include YARiSL Zhi Xuan X, YARiSL Zhi Xuan, YARiSL Zhi Xiang, Levin, GAC Toyota iA5, Levin Twin Engine E+, Camry, Toyota C-HR, Wildlander, and Highlander. Taking the Camry as an example, its body dimensions are 4900mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. In terms of appearance, the Camry features a three-layer grille design at the front, a two-tone body design, and a dual-side quad-exhaust pipe design at the rear. The sport version has a more innovative overall design, offering a fresh visual experience.
1
2
Share

Do You Need to Press the Brake When Shifting Gears in an Automatic Car?

When shifting gears in an automatic car, you need to press the brake. Pressing the brake during gear shifting is to prevent the vehicle from moving forward or backward while shifting, ensuring it remains stationary. Therefore, apply normal pressure to the brake pedal to stabilize the car. Remember not to press the brake too lightly. Otherwise, the brake pedal sensor may not detect that the driver has pressed the brake, and it will not release the gear. Additionally, the vehicle may not achieve effective braking. While driving, you can select the transmission mode based on your driving preferences, such as shifting from D (Drive) to M (Manual mode) or S (Sport mode). The transmission also allows the driver to shift into neutral (N) in special situations to cut off engine power. If you attempt to shift into P (Park) or R (Reverse) while driving, the transmission will not execute the command. Modern transmissions are computer-controlled to prevent accidental gear shifts while driving. If you mistakenly shift into P or R, the transmission's computer will recognize it as an invalid operation and refuse to execute the shift command, so there's no need to worry about shifting into the wrong gear while driving.
16
3
Share

How Many Questions Are There in the Driving Test Subject One Exam?

The total number of questions in the driving license Subject One exam is 100. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the exam consists of single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the exam. Subject One, also known as the theoretical exam or driver theory test, is part of the motor vehicle driving license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer with a time limit of 45 minutes. Subject One exam content: regulations on driving licenses and motor vehicle management; road traffic conditions and regulations; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One exam precautions: Candidates should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the exam room. Upon entering, verify your identity at the assigned station, find your seat, and begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail once, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it—failure to sign renders it invalid. There is no limit to the number of times you can reschedule the Subject One exam. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail it again, the exam session ends, and you must reschedule. In contrast, Subject Two and Subject Three allow only five exam attempts each, and rescheduling must occur at least ten days later. If you fail the Subject Three safe and civilized driving knowledge test, your passing score for the road driving skills test remains valid. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject One refers to the exam on road traffic safety laws, regulations, and related knowledge; Subject Two refers to the field driving skills test; Subject Three is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, the official term (as per the Ministry of Public Security’s Order No. 123) does not include "Subject Four."
2
2
Share

How to Turn Off the SOS Function in an Audi?

Audi SOS deactivation method: Press the SOS switch button once when the SOS is activated to turn it off. The SOS system is part of the vehicle's telematics system. The purpose of installing the SOS system in a car is to locate the vehicle's position and send emergency alerts through the manufacturer's built-in connectivity system when the driver or passengers are in danger or the vehicle encounters a malfunction. Audi is a German automobile brand, symbolized by four interlocking rings, and is a subsidiary of Volkswagen Group. Its main models include the A1, A3, A4, A5, A6, A7, A8, Q1, Q2, as well as the S and RS performance series.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.