Where is the Besturn T55 engine produced?

2 Answers
EmiliaLee
07/29/25 3:11am
The Besturn T55 engine is developed by FAW Car Co., Ltd. under China FAW Group Corporation and is a domestically produced engine. The engine model of the Besturn T55 is CA4GB15TD-30, with a maximum power of 124 kW, a maximum torque of 258 N·m, and a maximum horsepower of 169. For daily maintenance of the Besturn T55 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be chosen according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the relief valve, carrying contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
Was this review help?
1
4
Share
VonGeorge
08/12/25 7:03am
As a car enthusiast, I've been driving the Bestune T55 for a while now. Its engine is indeed made in China, produced by FAW Group at their factory in Changchun, Jilin. As a domestic brand, Bestune uses its self-developed 1.5T turbocharged engine, which delivers smooth power output and is fuel-efficient. I find the acceleration quite smooth when driving on highways. Although some people have doubts about domestic engines, my actual driving experience shows good reliability with few malfunctions. FAW is an established company with upgraded production processes, ensuring quality. When I bought the car, I researched and found that this engine incorporates global technical standards, has good cost control, and is easy to maintain, making it suitable for drivers like me who seek value for money. Domestic products are improving rapidly and worth trying.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What are the symptoms of insufficient fuel pump pressure?

Symptoms of insufficient fuel pump pressure are as follows: 1. The fuel pump under the rear seat makes a "buzzing" noise while the vehicle is moving. 2. The vehicle lacks power during acceleration, especially with noticeable hesitation during sudden acceleration. 3. Difficulty starting the vehicle, including failure to ignite. 4. The engine warning light on the instrument cluster remains illuminated. Causes of low fuel pump pressure include: 1. Wear of the oil seal at the rear end of the fuel pump drive gear shaft or loose pipe connections, allowing air into the fuel line, low fuel level in the tank, or a dirty filter. 2. Wear or jamming of the fuel pump gear's end face bearing, leading to excessive axial clearance. 3. Damage to the needle roller bearing, causing abnormal gear meshing and scoring of the fuel pump housing. 4. Jamming of the fuel pump regulator or relief valve, insufficient spring tension, or broken springs.
2
2
Share

How often should Toyota CVT transmission fluid be changed?

CVT transmission fluid has a slightly longer replacement interval compared to other automatic transmissions, generally every 2-3 years or approximately 60,000-80,000 kilometers. Here are the potential risks of not changing Toyota CVT transmission fluid for a long time: 1. Transmission fluid working under high-speed and high-temperature conditions for extended periods can deteriorate and evaporate, thereby accelerating the wear of mechanical components and, in severe cases, damaging internal transmission parts. 2. If the transmission fluid is not changed for a long time, the car may experience weak starts when cold. During driving, slight slipping phenomena may occur. 3. Long-term failure to change the transmission fluid can cause the fluid to thicken, potentially obstructing the transmission cooler, leading to excessively high transmission fluid temperatures and increased wear. Additional information: There are generally two methods for changing transmission fluid: gravity drain and machine flush.
15
5
Share

Why Can't the Car Start with the Key?

Car key can't start the car refers to the situation where you have already entered the car but cannot ignite the engine, rather than being unable to open the car door. There are three main reasons why a car key might fail to start the car: 1. The steering wheel is locked: This is a normal anti-theft feature. Simply turn the steering wheel slightly clockwise or counterclockwise and gently turn the key to unlock it. 2. Incorrect gear position: For automatic transmission cars, to start the engine, the gear lever must be in N (Neutral) or P (Park) position. If the gear is not in N or P, the car might move immediately upon ignition, which is highly dangerous. Just shift the gear back to P and try starting again. 3. Car malfunction: If the car still cannot start in P position, or if the dashboard shows an abnormal gear indication, it is necessary to seek immediate repair. The issue could be due to a faulty electronic gear sensor or an electro-pneumatic valve.
20
1
Share

Should You Use Idle Speed or Throttle When Reversing?

During the reversing process, it is best to use idle speed as much as possible. Here is some related information about reversing: 1. When driving a vehicle and encountering a parking space that requires reverse parking, it is essential to reduce the driving speed of the vehicle as much as possible. For novice drivers, reversing may not be a very easy task, whether driving a manual transmission vehicle or an automatic transmission vehicle. 2. During the reversing process, if driving a manual transmission vehicle, you can moderately press the throttle pedal, as manual transmission vehicles are prone to stalling during reversing. If driving an automatic transmission vehicle, you can use idle speed during reversing, and generally, there is no need to press the throttle. This depends on the driving conditions of the vehicle. If reversing on a flat road, using idle speed is sufficient. However, if reversing on an uphill section, pressing the throttle may be necessary. 3. Whether driving a manual transmission vehicle or an automatic transmission vehicle, you can utilize the vehicle's reversing camera and rearview mirrors during the reversing process. Always observe the obstacles around the vehicle to avoid collisions.
16
2
Share

What Types of Transmissions Are There?

There are many types of car transmissions, with the most common including AMT automatic transmissions, AT automatic transmissions, CVT continuously variable transmissions, and DCT dual-clutch transmissions. Here is some relevant information about transmissions: 1. AMT Automatic Transmission: The AMT transmission is a compromise between MT and AT transmissions. It has relatively low production costs and is more convenient to operate. However, improper operation can cause strong jerking sensations, affecting comfort. 2. AT Automatic Transmission: The AT automatic transmission consists of a torque converter, planetary gears, and a hydraulic control system, achieving variable torque through hydraulic transmission and gear combinations. 3. CVT Continuously Variable Transmission: Compared to AT automatic transmissions, the CVT eliminates the complex and bulky gear combination transmission. Instead, it uses two sets of pulleys. Gear shifting is achieved by changing the contact radius of the belt between the driving and driven pulleys. 4. DCT Dual-Clutch Transmission: The DCT dual-clutch transmission uses two sets of clutches, which alternate to achieve seamless gear shifting. DCT can be divided into dry dual-clutch and wet dual-clutch types.
4
4
Share

What to Do When the Reversing Camera of the Tiguan Suddenly Stops Displaying?

Here are the solutions for when the reversing camera of the Tiguan suddenly stops displaying: 1. The camera is damaged or blocked. If the camera is damaged, you should take it to a repair shop or a 4S store for maintenance, and if necessary, replace it with a new one. If it's just blocked by debris, simply remove it. 2. The display screen is damaged. If the screen remains black and doesn't start up or shows distorted images, take it to a repair shop or a 4S store for inspection and repair. 3. Poor wire contact. The image from the camera cannot be transmitted to the main unit. In this case, the central control panel needs to be disassembled for inspection. 4. The battery is dead. If the car's lights or multimedia system are used for a long time while the engine is off, the battery may drain. When the battery is low or dead, the multimedia system won't work, and the reversing camera won't display. Recharge the battery or replace it to solve this issue.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.