Where is the battery of BYD Song DM located for jump-starting?

Is the 2.5L Engine in Toyota Camry Imported?

Toyota Camry 2.5L uses the engine model A25A/A25C, with a maximum horsepower of 209 HP, maximum power of 154 KW, maximum power speed of 6600 rpm, and peak torque of 250 Nm. The 2.5L engine in Toyota Camry is not imported; it is domestically produced by GAC Toyota. For the daily maintenance of the Toyota Camry 2.5L engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. In small amounts, it suspends in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

1

0

Share

What Causes the Sound of Water When Accelerating?

The sound of water when accelerating can be caused by water remaining in the pipes of the air conditioning system's heater core or residual water accumulation in the car. Water in the air conditioning system: The warm air from the heater comes from the circulation of the engine coolant. The pipes in this area are positioned relatively high, and after replacing the coolant, some air may remain trapped, which over time can form a certain amount of water accumulation. When cold water flows through the heater core, the driver may hear a water sound when accelerating. Residual water in the car: A loose or damaged exhaust pipe can lead to water accumulation inside the car. It is recommended to check if the water level in the car's radiator has decreased. If it has, the air inside the radiator should be purged to eliminate this water sound. Engine knocking: If the car makes a water sound when accelerating deeply, it may be due to engine knocking causing noise from the valves. It is advisable to check the cause of the knocking and add some anti-knock agents. Additionally, pay attention to the fuel grade when refueling. Avoid mixing fuels and do not use gasoline with a grade that does not match the car's recommended fuel grade. This can also help prevent the sound of water when accelerating.

10

0

Share

Do I need to cancel my ETC if I no longer use it?

It is possible not to cancel the ETC if it is no longer in use, but failing to do so may lead to negative consequences: If the license plate number is recycled but the bound ETC is not unbound, the new owner will be unable to bind an ETC, thus inconveniencing others; if the car is sold to someone else without canceling the ETC, and the device remains in the vehicle, the toll station will recognize the ETC device, and as long as the bank card has a balance, toll fees will continue to be deducted from the card. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the following documents are required: the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent's valid ID card is also needed. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp; a bank card for deducting highway toll fees; the applicant must be aged between 18 and 60; the vehicle must be registered under an individual's name. Documents required for official vehicles: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the agent; original vehicle registration certificate; the vehicle for which ETC is to be applied. How ETC works: Through the onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane of the toll station, and uses computer networking technology to settle accounts with the bank in the background, allowing the vehicle to pay tolls for highways or bridges without stopping when passing through toll stations. Benefits of installing ETC: Save time: Avoid the hassle of queuing and waiting; Green and environmentally friendly: Green and low-carbon, vehicles passing through toll stations without stopping can reduce noise and exhaust emissions and pollution; Reduce wear and tear: Save costs, reduce the frequency of vehicle starts and stops, decrease wear and fuel consumption, users can enjoy toll discounts; Improve efficiency: The theoretical passing efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

13

5

Share

Can you proceed if the red light stays on without changing?

Yes, here are the details: Prerequisite: In most cities, traffic signals typically last for two to three minutes, with a maximum duration not exceeding five minutes, as longer durations could exacerbate urban road congestion. If you notice that the signal ahead remains red continuously, it may indicate a malfunctioning traffic light, and in such cases, you may proceed through the red light. Correct procedure: Use your phone to call the traffic management department, inform them of the specific intersection where this issue is observed, and report the situation to them. After doing so, you may proceed through the intersection. Before choosing to cross the intersection, ensure the safety of pedestrians in the vicinity. If there are hazardous conditions, passage should be prohibited.

5

Share

What kind of engine oil should be used for Volkswagen Eos?

Volkswagen Eos can use 5W-30 full synthetic engine oil. The following is relevant information: 1. The Volkswagen Eos is an imported car, mainly introduced into the Chinese automotive market through imports. Since this car is equipped with a turbocharged engine, it is recommended to use full synthetic engine oil. Turbocharged engines operate differently from naturally aspirated engines, so it is advisable to use higher-performance full synthetic engine oil to protect the engine. 2. There are three types of engine oils used in cars: mineral oil, semi-synthetic oil, and full synthetic oil. These three types of oils serve different purposes. During engine operation, the oil forms a protective film between the internal components of the engine, safeguarding these parts.

3

0

Share

Can a newly tinted car be exposed to rain?

A newly tinted car should avoid exposure to rain as much as possible. Here are some precautions after car window tinting: Do not roll down the windows: After tinting, the film has not fully adhered to the car glass, so avoid rolling down the windows for three days. Do not wash the car: Avoid washing the car within three days and do not wipe the film with hard objects. Water bubble phenomenon: On the second day after tinting, water mist and bubbles usually appear, which is normal. The moisture will evaporate after exposure to sunlight. Winter tinting: If the tinting is done in winter, the moisture evaporates more slowly. The front and rear windows may take a month to dry completely, and the rear window heating wires should not be used within a month.

18

3

Share

Where is the battery of BYD Song DM located for jump-starting?

Is the 2.5L Engine in Toyota Camry Imported?

What Causes the Sound of Water When Accelerating?

Do I need to cancel my ETC if I no longer use it?

Can you proceed if the red light stays on without changing?

What kind of engine oil should be used for Volkswagen Eos?

Can a newly tinted car be exposed to rain?

What is the displacement of the Ford Raptor F150?

Is the Grand Commander a four-wheel drive vehicle?

How Many Years Should a Private Car Be Driven Before It Needs to Be Replaced?

What Impact Does Starting Fluid Have on an Engine?