Where is the battery located in the Mercedes-Benz R350?

1 Answers
Rafael
07/29/25 5:30pm
The battery of the Mercedes-Benz R350 is located under the front passenger seat, specifically beneath the co-driver's seat. Below is some knowledge about the battery. Battery working principle: The negative electrode is made of a lead plate filled with sponge-like lead, and the positive electrode is made of a lead plate filled with lead dioxide, with 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead acts as the negative electrode, undergoing an oxidation reaction and being oxidized to lead sulfate; lead dioxide acts as the positive electrode, undergoing a reduction reaction and being reduced to lead sulfate. Battery maintenance methods: Avoid storing the battery in a discharged state. A discharged state refers to when the battery is not recharged promptly after use. In this state, sulfation is likely to occur, with lead sulfate crystals adhering to the plates, blocking ion channels and resulting in insufficient charging and reduced battery capacity. The longer the battery remains idle in a discharged state, the more severe the damage. When the battery is not in use, it should be charged once a month to extend its service life.
Was this review help?
17
0
Share
More Forum Discussions

Does the BMW 525 Have Automatic Parking Function?

The BMW 5 Series is equipped with automatic parking function, so the BMW 525 also has this feature. When using the automatic parking function, the vehicle speed should be below 35km/h. To activate it, press the automatic parking assist button located to the left of the electronic handbrake button, and the system will automatically detect parking spaces on both sides of the road. This system only supports parallel parking on the left or right side. How to use the BMW 525 automatic parking function: Press the PDC button to activate the automatic parking function and ensure that it is indeed turned on. Drive at the required speed, allowing the ultrasonic sensors to effectively detect parking spaces. If a suitable parking space is detected, the central display screen will show a "Please Stop" prompt. Brake the vehicle to a stop, and the system will prompt you to choose between parallel or perpendicular parking. Then, make your selection based on the situation. Precautions: During automatic parking, the driver must pay attention to the surroundings. If any abnormalities are noticed, immediately apply the brakes manually or release the PDC button to exit the automatic parking mode. Before starting automatic parking, always remember to turn on the turn signal. Ensure that the seatbelt is fastened; otherwise, the automatic parking function cannot be activated.
17
5
Share

What is the Difference Between a Twin-Cylinder and a Four-Cylinder Engine of the Same Displacement?

The difference between a twin-cylinder and a four-cylinder engine of the same displacement mainly lies in low-speed torque and the smoothness of power delivery at medium to high speeds. Twin-cylinder engines provide greater torque at low speeds, while four-cylinder engines offer smoother power delivery. Twin-cylinder engines excel in low-end torque: Typically, twin-cylinder engines generate more torque at low speeds compared to four-cylinder engines. However, they also produce more noticeable noise and vibration. Twin-cylinder engines are cheaper to manufacture, more compact, and easier to maintain, making them a popular choice for many mainstream motorcycles. Common displacements like 300CC, 400CC, 700CC, and 800CC often feature twin-cylinder engines. Four-cylinder engines operate smoothly: Due to their four-cylinder configuration, these engines run more smoothly than twin-cylinder engines, with significantly less vibration and noise. They also achieve higher speeds more easily. However, four-cylinder engines have a more complex structure and require higher manufacturing precision, resulting in higher costs. As a result, motorcycles equipped with four-cylinder engines are rare and typically limited to heavy-duty models.
17
3
Share

How to Fold Down the Rear Seats of a Corolla Hybrid?

There is a switch on each side near the rear seat headrests. Pull out both switches to fold down the rear seats. More Corolla-related knowledge is as follows: 1. Previously translated as "Corolla", it is a brand under Toyota Motor. The Corolla is equipped with Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads, ensuring relatively ideal sports performance. 2. The first-generation Corolla was launched in 1966 as an affordable car for the masses. Due to its low price, it was highly popular among consumers at the time. It has now evolved to the 11th generation and remains one of the best-selling models globally.
17
1
Share

How to Adjust the Time on a Classic Focus?

Power on the vehicle and long-press the button on the dashboard to adjust the time. More information about the Classic Focus is as follows: 1. It is an A-segment family sedan, first introduced by Ford at the 1998 Paris Motor Show, and is one of the flagship models of Ford Europe. 2. The prototype was the GHIA concept car displayed by Ford in 1991. The first-generation Focus made a remarkable impact upon its official mass production in Europe, winning numerous automotive awards and replacing the Ford Escort as the company's main model in that market. 3. As Ford's best-selling compact car, it has enhanced the brand's global market position with its excellent chassis and handling.
3
4
Share

How to Repair a Broken Corolla Steering Gear?

If the steering gear of a Corolla is damaged, it can be replaced at a repair shop or a 4S store. The steering gear is part of the steering transmission mechanism. Also known as the steering machine or direction machine, the steering gear is the most important component in a car's steering system. Its function is to amplify the force from the steering wheel's transmission mechanism and change the direction of force transmission. Below are the classifications of steering gears: 1. Rack and Pinion Steering Gear: The most common type of steering gear. Its basic structure consists of a pair of meshing small gears and a rack; 2. Worm and Peg Steering Gear: A steering gear where the worm is the driving part and the peg is the driven part; 3. Recirculating Ball Steering Gear: A recirculating ball power steering system, mainly composed of two parts: the mechanical part and the hydraulic part.
14
1
Share

What are the differences between Emgrand and Vision?

Here are the differences between Emgrand and Vision: 1. Price: Vision has 8 models available for sale, while Emgrand has 12 models available for sale. The price of Vision is lower than that of Emgrand. 2. Body dimensions: Vision measures 4599/1747/1482mm in length/width/height with a wheelbase of 2615mm. Emgrand measures 4632/1789/1470mm in length/width/height with a wheelbase of 2650mm. 3. Powertrain: Although both cars are equipped with a 1.5L inline 4-cylinder naturally aspirated engine, they are matched with different transmissions. Emgrand is paired with either a 5-speed manual or CVT continuously variable transmission, delivering a maximum torque of 140N-m. Vision is paired with a 5-speed manual, 4-speed automatic manual transmission, or CVT continuously variable transmission, delivering a maximum torque of 142N-m.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.