Where is the battery located in the BMW X5?

2 Answers
LaAlessandra
07/24/25 5:38am
The battery of the BMW X5 is located in the trunk. The BMW X5 is an SUV model under the BMW brand. Taking the BMW X5 2021 xDrive30i M Sport Package as an example, its body dimensions are: length 4930 mm, width 2004 mm, height 1776 mm, wheelbase 2975 mm, and fuel tank capacity 83 liters. The BMW X5 2021 xDrive30i M Sport Package is equipped with a 2.0T 265 horsepower L4 engine, with a maximum power of 195 kW and a maximum torque of 400 Nm. It uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
6
0
Share
Lindsay
08/11/25 1:22am
I've performed maintenance on multiple BMW X5 models at the dealership. Unlike most vehicles where the battery is located in the engine compartment, the X5 hides its battery in the trunk area. Open the rear cargo space, lift up the floor carpet and cover panel, and you'll find the battery underneath. BMW's design is quite clever - it helps balance front/rear weight distribution for improved driving stability, especially during cornering. When locating the battery yourself, remember to turn off the engine and remove the key to prevent accidental short circuits. During replacement, always disconnect the negative terminal first and handle cables gently to avoid damaging wiring. The exact position may vary slightly by model year - for instance, older versions placed it under the front seats while newer models consistently position it in the rear compartment. If unsure, always consult the owner's manual or seek professional technician assistance rather than forcing anything - safety comes first.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Does the steering wheel need calibration after removal and reinstallation?

Make marks, no positioning is needed. If no marks are made, a test drive is normal and calibration is not necessary. If it is not straight, it can be removed and readjusted without any impact. The following is an introduction to the steering wheel: 1. Reasons for the steering wheel not being straight: (1) A slightly off-center steering wheel is generally related to tire pressure, tire wear, wear of chassis components, and wheel alignment. You can first measure the tire pressure. When the tire pressure on both sides is inconsistent, the vehicle will drive towards the side with lower pressure. (2) Due to changes in vehicle alignment data, variations in wheel pressure, and loosening of suspension bushings during driving, the steering wheel may not remain in a straight position. 2. Two situations where the steering wheel is not straight: (1) One is when the steering wheel is not straight, but the vehicle can maintain straight-line driving. This phenomenon requires wheel alignment, adjusting the left and right front values with the steering wheel straightened. (2) The other is when the direction automatically drifts after releasing the steering wheel, causing the steering wheel to be off-center. This phenomenon also requires wheel alignment, along with checking tire pressure, suspension looseness, and body level issues.
14
2
Share

What Materials Are Needed for Driver's License Renewal?

Driver's license renewal requires the following materials: the driver's ID card, driver's license, three one-inch white-background photos of the applicant, and a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. Time for driver's license renewal: According to the regulations on the application and use of motor vehicle driver's licenses, the driver should apply for renewal at the vehicle management office where the license was issued or another office 90 days before the expiration date of the current license. Driver's license renewal process: You can bring your ID card and driver's license directly to the renewal authority, where you can take photos, undergo a physical examination, make copies, and renew the license on-site. If you don't mind the hassle, you can also go to a qualified hospital for the physical examination and a photo studio for photos, then bring all the required documents to the renewal authority to apply for renewal.
15
2
Share

Will points be deducted if the car body is not straight during the reverse parking in Subject 2?

Subject 2 reverse parking with an unaligned car body is considered a pass. As long as the car body does not cross the line during reverse parking, no points will be deducted. The straightness or tilt of the car body does not affect the test results. Below are the relevant details: 1. The Subject 2 test is part of the motor vehicle driver's license assessment. The original on-site test included selecting three items from nine: fixed-point parking and slope starting, parallel parking, curve driving, right-angle turning, speed and width-limited gates, continuous obstacles, 100-meter gear shifting, and bumpy road driving. The revised Subject 2 test now consists of five mandatory items: reverse parking, parallel parking, fixed-point parking and starting on a slope, right-angle turning, and curve driving. The test rules have been adjusted to be stricter. 2. The entire test is judged by the onboard computer and evaluated by the system. Not following the prescribed route or sequence results in a 100-point deduction. The car body crossing the line results in a 100-point deduction. Failing to complete the reverse parking results in a 100-point deduction. Stopping midway results in a 100-point deduction. The test evaluates the driver's ability to operate the car within the designated area. Reverse parking is a key assessment point in the driver's test, requiring the driver to correctly reverse the car into the garage from both sides while in motion.
17
1
Share

Is It Normal to Buy 2019 Tires in 2021?

It is not normal to buy 2019 tires in 2021. Tires that have been in storage for over a year are considered stock tires. Tires that have been in storage for three years are expired, as the rubber has aged, significantly reducing comfort and making them prone to cracking and poor heat dissipation. This greatly impacts both acceleration and braking, and increases the risk of blowouts at high speeds, seriously endangering the safety of the vehicle owner's life and property. Purchasing such tires is absolutely prohibited. Below is relevant information about tires: 1. Check the tire's expiration date: The sidewall of the tire will have a four-digit number indicating the manufacturing date, with the first two digits representing the week and the last two representing the year. Generally, tires should not be used for more than three years or exceed 60,000 kilometers in mileage. 2. Pay attention to the sidewall: As the tire rubber ages, deep cracks may appear on the sidewall. However, as long as the sidewall has not been impacted and the cords are not broken, the tire can still be used. The triangular mark on the tire sidewall can help the owner locate a protrusion in the tread groove, which indicates the actual wear limit of the tire. That value should be greater than 1.6 millimeters.
17
0
Share

What are the types of brake pad materials?

Brake pads are generally classified into four major categories. The following are these four types of materials: 1. Semi-metallic friction materials: Used in disc brake pads for passenger cars and heavy-duty vehicles. 2. NAO friction materials: Broadly refers to non-asbestos and non-steel fiber friction materials, though modern disc pads may contain small amounts of steel fibers. 3. Powder metallurgy friction materials: Also known as sintered friction materials, these are made by mixing and pressing iron-based or copper-based powdered materials, followed by high-temperature sintering. 4. Carbon fiber friction materials: A type of friction material reinforced with carbon fiber.
17
1
Share

How to Maintain a Car with 200,000 Kilometers?

For a car with 200,000 kilometers, it is normal to replace the engine oil and oil filter; check whether the brake fluid, transmission oil, and power steering fluid should be replaced; inspect the brake pads, tires, shock absorbers, and suspension; check the spark plugs, throttle valve, and fuel supply system; perform front and rear wheel rotation and routine checks (lights, battery, etc.). Below is the relevant introduction to car maintenance: 1. Exterior inspection: Before driving, check the doors, engine hood, trunk, and glass condition, inspect the body for damage, whether the body is tilted, and if there are any oil or water leaks. 2. Engine and various fluids: Check the fixing condition of engine components, inspect all engine joints for oil or water leaks. Check and adjust the tightness of the belt, inspect the fixing condition of all pipes and wires. Check and replenish engine oil, coolant, and electrolyte. 3. Tires: Check tire wear and clean the trunk. Replace tires when they are close to the wear mark. Inspect tires for bulges, abnormal wear, aging cracks, or hard damage. 4. Cleaning and lubrication: Clean the oil stains from the engine hood, door, and trunk hinge mechanisms, and lubricate them. The general service life of antifreeze is 2 years, so it should be replaced during maintenance, and the cooling system should be thoroughly cleaned. Due to the hygroscopicity of the braking system, brake fluid should be replaced every two years.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.