Where is the battery located in the BMW 3 Series?

Does the Audi A5 have a coupe version?

The Audi A5 is available in coupe versions, which include: four-door models, two-door coupe models, and two-door convertible models. Taking the 2021 Audi A5 as an example, its body dimensions are: length 4705mm, width 1846mm, height 1341mm, with a wheelbase of 2766mm and a fuel tank capacity of 54 liters. The 2021 Audi A5 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 150kW at 4200 to 6000 rpm, and a maximum torque of 320Nm. It is paired with a 7-speed dual-clutch transmission, and features front and rear five-link independent suspension systems.

8

3

Share

Should I Shift Gears or Use the Handbrake When Parking a Manual Transmission Car?

Manual transmission cars must use the handbrake when parking. Parking Brake: The parking brake, commonly known as the handbrake, provides resistance to prevent the car from rolling when parked. The force of the parking brake is much weaker than that of the service brake, just enough to keep the car from rolling on a slope. Principle of the Handbrake: It uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness and increase the handbrake's travel distance.

11

3

Share

How many days does it take for a general traffic violation to be available online?

Generally, traffic violations can be checked online within about a week. Within 10 days from the date the traffic monitoring equipment collects the violation records, the traffic management department of the public security authority in the area where the violation occurred should review the recorded content. After verification, the information will be entered into the road traffic violation information management system as evidence of the violation. The traffic police team will collect, organize, and review the data, and then input and transmit it, usually completing the online entry within a week. If the violation is captured by a camera (non-on-site violation), it may take up to 15 days before it can be checked online. The specific time varies by region and is not fixed, but it should not exceed 13 working days at the latest.

17

1

Share

Does a 7-Speed Dry Dual-Clutch Transmission Need an Oil Change?

A 7-speed dry dual-clutch transmission requires transmission fluid changes. Regardless of the type of transmission, changing the transmission fluid during use is essential to ensure its proper operation. The recommended replacement interval for transmission fluid in vehicles is every 2 years or 60,000 kilometers. The exact timing should be determined based on the vehicle's user manual and its usage conditions. If the vehicle is frequently used, it is advisable to change the transmission fluid earlier. Dual-clutch transmissions can be divided into dry and wet types. In a dry dual-clutch transmission, the clutch plates are not immersed in transmission fluid, whereas in a wet dual-clutch transmission, they are. Dry dual-clutch transmissions offer faster gear shifts and higher transmission efficiency. Wet dual-clutch transmissions can handle higher torque and provide better reliability and stability. However, wet dual-clutch transmissions are more expensive. Most high-performance vehicles use wet dual-clutch transmissions, including supercars and high-performance cars. Vehicles equipped with dual-clutch transmissions deliver an exhilarating driving experience. Working Principle: Dual-clutch automatic transmissions are based on manual transmissions. Unlike manual transmissions, DCTs have two clutches connected to two input shafts. Gear shifts and clutch operations are controlled by an integrated electro-hydraulic module rather than a clutch pedal. Similar to tiptronic hydraulic automatic transmissions, drivers can manually shift gears or leave the gear lever in fully automatic D or S mode. In this mode, gear shifts are typically performed by gear and clutch actuators. Transmission fluid is a lubricant that keeps the transmission system clean and protects it. Depending on the transmission structure, transmission fluids are categorized into automatic transmission fluid (ATF) and manual transmission fluid (gear oil). High-quality transmission fluid ensures smooth operation, extends the transmission's lifespan, and improves its efficiency. Prolonged failure to change the transmission fluid can lead to reduced control precision and poorer gear-shifting accuracy. Automatic transmission fluid (ATF) is specifically designed for automatic transmissions. Early automatic transmissions did not have dedicated fluid and used engine oil instead. Due to significant differences in working conditions and technical requirements, this practice was quickly abandoned. Modern ATF serves as the hydraulic fluid for torque converters, the lubricant for planetary gear sets, and the hydraulic oil for shift mechanisms. Under normal driving conditions, ATF should be replaced every 120,000 kilometers, or every 60,000 kilometers under severe driving conditions. Manual transmission fluid, commonly referred to as gear oil, is classified into five grades (GL-1 to GL-5) by the American Petroleum Institute (API) based on quality. GL-1 to GL-3 are used for lubricating standard spur and bevel gears, as well as transmissions and steering gears under general loads. GL-4 is suitable for high-speed, low-torque and low-speed, high-torque conditions, such as hypoid gears and manual transmissions. GL-5, the highest performance grade, is used for hypoid gears and manual transmissions under extreme conditions with high shock loads. Manual transmission fluid should typically be replaced every 2 years or 60,000 kilometers under normal driving conditions.

18

4

Share

What are the process benchmarks in vehicle manufacturing?

Vehicle manufacturing consists of four major processes: stamping, welding, painting, and final assembly. 1. Stamping: Sheet metal parts are pressed into shape using molds according to design requirements. 2. Welding: Various sheet metal parts are welded together to form the vehicle body-in-white as per design specifications. 3. Painting: The body-in-white undergoes pretreatment, primer coating, and topcoat painting. 4. Final assembly: All interior and exterior components, including the engine, are installed onto the body, resulting in the complete vehicle as seen. After passing various quality inspections, the vehicle is considered finished. Additional information: Stamping plays a crucial role in automotive body manufacturing, especially for large body panels. These components often feature complex shapes, large structural dimensions, sometimes with spatial curvature, and require high surface quality. Stamping proves unparalleled compared to other manufacturing methods for producing such parts.

17

3

Share

Where is the massage button for the Audi S5 seat?

Audi S5 seat massage button is located inside the driver's seat, with a seat icon on the button. The massage seat can better protect the cervical spine of the driver and passengers, promote blood circulation, relieve driver fatigue, help the driver relax, reduce travel fatigue, and allow the driver to get adequate rest. The Audi S5 body dimensions are: length 4762 mm, width 1843 mm, height 1342 mm, and wheelbase 2831 mm. The Audi S5 is equipped with a 3.0T turbocharged V6 engine, with a maximum power of 260 kW and a maximum power speed of 5400 to 6400 rpm, matched with an 8-speed automatic manual transmission.

9

5

Share

Where is the battery located in the BMW 3 Series?

Does the Audi A5 have a coupe version?

Should I Shift Gears or Use the Handbrake When Parking a Manual Transmission Car?

How many days does it take for a general traffic violation to be available online?

Does a 7-Speed Dry Dual-Clutch Transmission Need an Oil Change?

What are the process benchmarks in vehicle manufacturing?

Where is the massage button for the Audi S5 seat?

What cars have naturally aspirated engines?

Does the Corolla radiator need water?

Can a Plastic Steering Wheel Be Replaced with a Leather One?

Does Drifting in a Regular Sedan Damage the Car?