Where is the battery located in an Audi Q5?

What are the reasons for the Volkswagen Jetta's headlights not working?

The reasons for the Volkswagen Jetta's headlights not working are: 1. The headlight fuse or bulb is burned out; 2. Poor contact in the wiring. Taking the 2019 Volkswagen Jetta VS5 as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, wheelbase 2630mm, fuel tank capacity 51L, and body structure is a 5-door, 5-seat SUV. The 2019 Volkswagen Jetta VS5 is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm, paired with a 5-speed manual transmission.

2

0

Share

What Causes the Metal Friction Sound from Brake Pads?

Metal friction sounds from car brake pads can be caused by excessively hard brake pads, excessive wear of the brake pads, excessive wear of the brake disc or brake drum, rust on the brake caliper, slow return of the brake master cylinder, among other reasons. Below are the replacement standards for brake pads: Mileage: Under normal driving conditions, the front brake pads should be replaced approximately every 30,000 to 50,000 kilometers, and the rear brake pads every 60,000 to 100,000 kilometers. Once severe wear is detected, they should be replaced promptly. Wear Level: Generally, new brake pads are about 1.5 centimeters thick. If they wear down to one-third of their original thickness, meaning less than 5 millimeters, it is recommended to replace them immediately; If a metal friction sound is heard during braking, this may indicate that the brake pads have worn down to their minimum thickness, causing the limit indicators on both sides of the pads to contact and rub against the brake disc, producing abnormal noises—prompt replacement is necessary; If the brake pedal feels lighter than usual, or if braking feels laborious and ineffective, it indicates severe wear and insufficient thickness of the brake pads, requiring immediate replacement.

11

5

Share

What is the difference between buying a car from an auto trade company and a 4S store?

Here are the specific differences between buying a car from an auto trade company and a 4S store: Brand authorization: A 4S store is directly authorized by the car manufacturer, meaning it helps the manufacturer sell cars. In terms of car quality and subsequent feedback on vehicle issues, a 4S store is more reliable. An auto trade company is an ordinary business that obtains cars through 4S stores or other channels, meaning it has no direct relationship with the manufacturer. Car maintenance and servicing: A 4S store integrates vehicle sales, repairs, after-sales service, and parts sales, meaning any car issues can be resolved at the 4S store. An auto trade company mainly sells vehicles and is naturally less professional in maintenance and servicing compared to a 4S store, so it lacks sufficient after-sales support. Car pricing: The operating costs of a 4S store are higher, so buying a car from a 4S store tends to be more expensive because it only sells models of a single brand. Buying a car from an auto trade company is usually cheaper due to diversified sourcing channels and the sale of multiple car brands, resulting in lower operating costs.

11

4

Share

Where is the car's air filter located?

The air filter element of the Verano is located in the engine compartment, inside the air filter housing on the right side of the engine. According to the maintenance manual, the air filter should generally be replaced every 10,000 to 20,000 kilometers or every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of sludge in the throttle. The function of the air filter: to filter out particulate impurities in the air, ensuring that clean air enters the cylinders in sufficient quantities, preventing airborne dust from being sucked into the engine and accelerating the wear of the piston group and cylinders. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine sucks in a large amount of air. If the air is not filtered, the suspended dust in the air will be drawn into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly serious in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders. Dirty air filter: Using a dirty air filter while driving can cause insufficient air intake into the engine, leading to incomplete fuel combustion, resulting in unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car air filter is a device that removes particulate impurities from the air, consisting of one or several components that clean the air. Its main function is to filter out harmful impurities from the air before it enters the cylinders, reducing early wear of the cylinders, pistons, piston rings, valves, and valve seats. Therefore, before air enters the cylinders, it must pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light clogging, it can be cleaned by blowing compressed air from the inside out and reused. A heavily dirty air filter should be replaced promptly.

3

Share

What is the battery model for the GL8?

The battery model for the Buick GL8 is 80D26R 12V 70A. The battery is a crucial component in a vehicle, supplying power to all electronic devices when the engine is not running. After the engine is started, the alternator takes over the power supply for the electronic devices and also charges the battery. The battery is responsible for starting the engine. During engine startup, the ignition system, fuel supply system, and starter all require electricity to function. The battery is a wearable part that needs regular replacement. Typically, a battery lasts 3 to 4 years, but many car batteries fail before reaching this lifespan due to improper usage habits. When the engine is not running, avoid sitting in the car and using electronic devices for extended periods, as this can shorten the battery's lifespan. During routine maintenance, ask a technician to test the battery's internal resistance and voltage with professional equipment. If these values fall below standard levels, it indicates that the battery needs replacement. If the car will be unused for an extended period, disconnecting the battery's negative terminal can prevent it from discharging. Prolonged discharge can significantly reduce the battery's service life.

16

0

Share

Can temporary license plates use ETC?

As long as ETC is activated, you can use the ETC lane. Since ETC is an automatic payment device, it identifies the vehicle's ETC electronic tag, and the fee is deducted from the balance of the ETC electronic tag, which has little to do with whether a temporary license plate is used. ETC's charging principle: There will be one or more ETC lanes on highways. Through microwave-specific short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane of the toll station, the computer network technology is used to settle accounts with the bank in the background, achieving the purpose of paying road and bridge tolls without stopping at toll stations. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line; Green and environmentally friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improve efficiency: The efficiency of passing through ETC lanes can theoretically increase by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased," and explicitly proposed in the main indicators of the "13th Five-Year" comprehensive transportation development that "by 2020, the ETC usage rate of road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate of passenger vehicles, the future will also promote the use of ETC by trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a stationary vehicle ahead, to prevent the ETC device failure of the vehicle ahead or the absence of an ETC device, keep a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle ahead. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, and the fee deduction will fail. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. Non-human loosening or detachment only requires reactivation. When using a debit card to bind ETC, insufficient balance will also cause the fee deduction to fail. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. The windshield being too thick may cause poor sensing. This is especially important for vehicles that have had windshield replacements due to accidents or for those who have modified their windshields.

8

4

Share

Where is the battery located in an Audi Q5?

What are the reasons for the Volkswagen Jetta's headlights not working?

What Causes the Metal Friction Sound from Brake Pads?

What is the difference between buying a car from an auto trade company and a 4S store?

Where is the car's air filter located?

What is the battery model for the GL8?

Can temporary license plates use ETC?

What is the age limit for driving?

What is the Difference Between Bearing Seizure and Cylinder Explosion?

How to Solve the Sunroof Rattling on Bumpy Roads?

Does a 2013 car still need inspection in 2021?