Where is the battery located in a Corolla?

What is the fuel consumption of the Lynk & Co 06 PHEV when running without electricity?

The Lynk & Co 06 PHEV operates similarly to a conventional fuel-powered vehicle when running without electricity, with a fuel consumption exceeding 10 liters per 100 kilometers. Here are some key details about the Lynk & Co 06 PHEV: 1. Body: The vehicle measures 4340mm in length, 1820mm in width, and 1625mm in height, with a wheelbase of 2640mm. Despite its compact SUV classification, the interior space is surprisingly spacious, comparable to its fuel-powered counterpart, without any noticeable compromise due to the battery pack. Both legroom and headroom in the rear seats are ample. 2. Interior: The cabin features a 10.25-inch digital instrument cluster, a 10.25-inch touchscreen infotainment system, a three-spoke flat-bottom steering wheel, dual-tone integrated seats, a standard panoramic sunroof, and dual USB charging ports in the rear, blending simplicity with practicality. 3. Powertrain: According to official data, the vehicle is equipped with a hybrid system comprising a Volvo-shared Drive-E 1.5T three-cylinder turbocharged engine and a Siemens-supplied electric motor, delivering a maximum output of 259 horsepower and 310 N·m of torque. The NEDC-rated pure electric range is 55 km, and the official combined fuel consumption is 1.5L/100 km.

2

0

Share

What to Do When the Car Shows Excessive Tire Pressure?

If excessive tire pressure is detected, the solution is definitely to release some air. If you are using a pointer-type tire pressure gauge, when excessive pressure is noticed, simply press the air release valve while monitoring the gauge to maintain normal tire pressure. Hazards of Excessive Tire Pressure: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and drifting, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends tire cords, reducing elasticity and increasing load during driving; decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, and impacts can cause internal cracks or blowouts, leading to tire bursts. Hazards of Insufficient Tire Pressure: Increases friction coefficient with the road surface, raising fuel consumption; makes the steering wheel heavy and prone to drifting, compromising driving safety; increases movement in tire components, causing abnormal heat from excessive rolling; reduces functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in tire bursts; increases tire body deformation, making the sidewalls prone to cracks and generating flexing motion, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area with the ground, accelerating shoulder wear.

8

0

Share

What to Use to Clean Yellowed Tires?

Yellowing of car tires may be caused by the adhesion of powdered metal rust from brake pads to the tire sidewalls, traces of dust, oxidation and yellowing of tire wax, premature oxidation of tire protectants, or premature aging of rubber. When tires turn yellow, it is recommended to use a high-quality stiff-bristled brush, citrus degreaser, V3 iron remover, or tire protectant for cleaning. Here are additional details: 1. Powdered metal rust from brake pads: Since brake pads contain iron, they wear down and produce powder during braking. When this powder comes into contact with water, it forms rust water that flows onto the tire sidewalls. Over time, the sidewalls will turn yellow; 2. Traces of dust: If the tires frequently enter and exit construction sites, the sidewalls are prone to yellowing. Without regular cleaning habits, the tire rubber can absorb an earthy yellow hue, which is difficult to clean but represents a normal yellowing condition; 3. Oxidation and yellowing of tire wax: New tires are often coated with a layer of tire wax. For vehicles frequently parked outdoors, the sidewalls are susceptible to yellowing because the tire wax oxidizes and turns yellow in high-temperature outdoor environments. Another scenario is when low-quality tire wax is used, which can also cause tire yellowing; 4. Premature oxidation of protectants: Premature oxidation and yellowing of protectants is an abnormal phenomenon. Generally, when protectants are applied directly to uncleaned tires, it accelerates their oxidation, leading to yellowing; 5. Premature aging of rubber: This phenomenon mostly occurs when the car is parked under direct sunlight for prolonged periods. Over time, the tire rubber will show signs of premature aging and turn yellow.

3

0

Share

Why does the motorcycle throttle automatically increase?

The reason for the motorcycle throttle automatically increasing is generally due to the throttle valve or throttle cable and throttle grip being stuck and not returning to position. Other causes such as minor air leaks, improper carburetor mixture ratio, or issues with the choke can also lead to the motorcycle throttle automatically increasing. How to use the motorcycle throttle: 1. Starting phase: Do not suddenly increase the throttle at this stage unless you want to wheelie or stall. It's best to coordinate with the clutch and control the throttle amplitude to start smoothly. 2. Deceleration phase: Sometimes braking may not be necessary to decelerate. In predictable situations that don't require emergency braking, reducing the throttle can achieve a certain degree of deceleration. Emergency braking should still be done in coordination with the front and rear brakes. 3. Cornering phase: Since this involves high-difficulty maneuvers, throttle control must be very proficient. Too much or too little throttle can lead to cornering failure. Going too slow can result in insufficient centrifugal force and excessive lean angle, causing a fall, while going too fast may lead to poor angle control and missing the correct timing. 4. Gear shifting phase: Each gear has its corresponding RPM range. Different gears require different torque and horsepower to control. Certain RPM ranges allow for smooth gear shifting, while others may cause gear disengagement and stalling. Some RPM ranges during upshifting or downshifting may result in jerking, and certain RPM ranges may cause fuel cut-off, all of which are closely related to throttle control.

14

0

Share

Where is the engine number of Changan CX20 located?

Location of the Changan CX20 engine number: 1. In China, the VIN code of passenger cars can be found under the front windshield on the driver's side. 2. On the vehicle registration certificate, the new version usually prints the VIN code in the "Chassis Number" column. 3. Other locations: such as insurance policies, various nameplates in the engine compartment, and the driver's side door pillar. The Changan CX20 uses two engines in total: one is a 1.3L naturally aspirated engine, and the other is a 1.4L naturally aspirated engine. The 1.3L naturally aspirated engine delivers 86 horsepower and 110 Nm of maximum torque, while the 1.4L naturally aspirated engine produces 101 horsepower and 131 Nm of maximum torque.

6

5

Share

What is the problem with blue smoke?

When a car emits blue smoke, it is caused by engine oil entering the internal combustion chamber, commonly referred to as "oil burning." This results in reduced engine acceleration, increased noise, and prolonged wear on the cylinder walls. In severe cases, it can damage the entire engine. Here are some additional details: 1. Definition of oil burning: Oil burning occurs when engine oil enters the combustion chamber and mixes with the air-fuel mixture for combustion. This phenomenon can lead to rapid damage to the oxygen sensor, increased carbon deposits in the combustion chamber, unstable idling, poor acceleration, higher fuel consumption, and excessive exhaust emissions. In severe cases, insufficient engine lubrication can cause irreparable damage or even total engine failure, significantly increasing repair costs and posing potential safety hazards. 2. Identification methods: (1) Cold-start oil burning: When starting the car for the first time in the morning, thick blue smoke may be emitted from the exhaust pipe. The smoke usually disappears after a short while and does not recur during the day. (2) Acceleration oil burning: When the driver accelerates sharply while driving or revs the engine while stationary, large amounts of blue smoke may be emitted from the exhaust. In severe cases, the driver may even see blue smoke in the side mirror from the exhaust pipe. (3) To confirm oil burning, fill the engine with oil and drive 1,000 kilometers. Then, take the car to a service station to weigh the oil and filter. Refill the oil and repeat the process two more times to get an average value. Normal oil consumption after the break-in period is typically around 0.3 liters per 1,000 kilometers. If the consumption exceeds this, it indicates an oil-burning issue.

6

5

Share

Where is the battery located in a Corolla?

What is the fuel consumption of the Lynk & Co 06 PHEV when running without electricity?

What to Do When the Car Shows Excessive Tire Pressure?

What to Use to Clean Yellowed Tires?

Why does the motorcycle throttle automatically increase?

Where is the engine number of Changan CX20 located?

What is the problem with blue smoke?

How to Identify the Production Date of a Seat Belt?

How to Open the Door of a Land Rover?

How to Fold Down the Rear Seats of a Car?

Where is the light switch located on the Tayron?