Where is the battery located in a Corolla?

1 Answers
SophieDella
07/30/25 2:08am
The battery in a Corolla is located in the engine compartment. Open the hood at the front of the car, and you will find the battery next to the engine. Generally, the service life of a car battery is 2 to 3 years, while the original battery in a new car can last for more than 3 years. Therefore, if the battery has been in use for nearly two years, you should be aware that its service life may have expired. The Corolla's body dimensions are 4630mm in length, 1775mm in width, and 1480mm in height, with a wheelbase of 2700mm. The Corolla is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116, a maximum power of 85 kilowatts, and a maximum torque of 185 Newton-meters, paired with a 10-speed continuously variable transmission.
Was this review help?
11
1
Share
More Forum Discussions

What does Corolla odo mean?

Corolla odo is the abbreviation of odograph, meaning odometer. How to view the odometer: By briefly pressing the TRIP button, you can cycle through the following displays one by one: trip mileage, average fuel consumption, instant fuel consumption, remaining range, total mileage, instant speed, driving time, average speed, and tire status. After activating the steering wheel multiplex function, you can also switch between these displays using the left and right buttons. How to check for odometer tampering: If a car has been consistently serviced at a 4S dealership, you can inquire about relevant records at the dealership to check the recorded mileage.
12
2
Share

What are the actual measured dimensions of the Geely Xingyue L trunk?

Geely Xingyue L trunk to the roof is 446 liters, the depth is 1000mm, the width is 1000-1200mm, and the height is 430mm. Overview of the trunk: The trunk can be opened or closed electrically or by remote control. To open the trunk, simply press the button in the car or the remote key, and the trunk will open automatically. Basic structure of the trunk: The basic structure consists of two core shaft drive rods. The drive rod is composed of a main shaft drive with an inner tube and an outer tube. The motor and gear inside the inner tube drive a threaded main shaft, which moves on a threaded nut fixed on the inner side of the outer tube.
4
3
Share

Is it necessary to change the gear oil for a scooter motorcycle?

Gear oil must be changed for a scooter motorcycle. The necessity and functions of changing gear oil are as follows. Necessity of changing gear oil: Gear oil is a high-viscosity lubricant specifically designed to protect power transmission components. Unlike regular engine oil, it has higher viscosity and generally contains extreme pressure additives and anti-wear additives. Functions of changing gear oil: For a scooter motorcycle, gear oil not only lubricates the gears but also provides cooling, cushioning, anti-corrosion, and cleaning effects. If it is not changed for a long time, the decline in its primary performance can affect the transmission, commonly leading to issues such as transmission noise, poor cleanliness, and excessive wheel rotation resistance.
3
3
Share

What is the function of a car's transmission?

The functions of a car's transmission are: 1. To change the transmission ratio, expanding the range of torque and rotational speed variations of the drive wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable working conditions; 2. To enable the car to reverse while keeping the engine's rotational direction unchanged; 3. To interrupt power transmission by using neutral gear, allowing the engine to start, idle, and facilitating gear shifting or power output. The internal control mechanism of an automatic transmission is very precise, with small matching clearances, so most automatic transmissions have an oil change cycle of generally two years or 40,000 to 60,000 kilometers. During normal use, the working temperature of transmission oil is usually around 120 degrees Celsius, thus requiring high-quality oil and maintaining cleanliness.
11
0
Share

What is the reason why the reverse light sometimes does not work?

The reasons why the reverse light sometimes does not work: 1. The reverse light bulb is damaged and not functioning; 2. Faulty reverse gear switch on the manual transmission or faulty gear position switch on the automatic transmission; 3. The fuse in the reverse light circuit is blown; 4. Open circuit or poor contact in the reverse gear switch signal line. Solutions for the reverse light sometimes not working: 1. Adjust the reverse light wire of the trailer power plug to correspond with the trailer reverse light interface position; 2. Check if the bulb is damaged; 3. Check if the fuse is blown; 4. Check if the grounding is good. The reverse light is installed at the rear of the car to illuminate the road behind and warn vehicles and pedestrians behind that the car is reversing.
9
2
Share

What to Pay Attention to After an Oil Change?

After changing the oil, pay attention to the oil maintenance cycle and the quality type of the oil. Overview of Engine Oil: Engine oil, also known as engine lubricant (English name: Engine-oil), serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, and shock absorption for the engine. Composition of Engine Oil: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties. Additives can compensate for and improve the shortcomings of the base oil's performance, endowing it with certain new properties, making them an important part of lubricating oil.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.