Where is the battery located in a BMW 523?

2 Answers
DeTravis
07/23/25 11:31pm
The battery charging location for the BMW 5 Series is inside the right-side panel in the trunk. How the battery works: The working principle of the BMW 5 Series battery is to convert chemical energy into electrical energy. The lifespan of the battery is closely related to the vehicle's condition. Battery maintenance methods: Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent it from freezing and getting damaged. In winter, the car engine is harder to start. Each attempt to start the car should not exceed 5 seconds, with a minimum interval of 15 seconds between attempts. If the car fails to start after several attempts, check other aspects such as the circuit, ignition coil, or fuel system. Avoid multiple uninterrupted attempts to start the car, as this can cause the battery to over-discharge and burn out.
Was this review help?
6
5
Share
Chavez
08/10/25 7:24pm
I often drive a BMW, where is the battery for the 523 model located? It's under the floor in the lower left corner of the trunk. I've found and checked it multiple times myself: lift the trunk carpet, and you'll see a small plastic cover or panel that can be pried open with a screwdriver or coin, revealing the battery inside. BMW designed it this way for better weight distribution, ensuring more stable driving, especially at high speeds. When replacing the battery, first remove the key—safety first; then disconnect the negative terminal to prevent short circuits, and tighten the connections after installation. Regularly checking the battery voltage is important, as it tends to drain faster in winter. It's recommended to measure the voltage every six months to avoid getting stranded on the road. Be careful not to touch metal parts when handling it yourself, and if unsure, it's best to visit a professional shop.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What is the distance for straight-line driving in Subject 3?

Subject 3 straight-line driving distance is 50-100 meters. Below are the techniques for straight-line driving: 1. Look far ahead: When driving, focusing only on the immediate area is not only unsafe but also makes it difficult to maintain straight-line driving. To keep the vehicle moving straight, develop the habit of looking far ahead, which helps prevent the vehicle from deviating from its path. 2. Find a reference point: Identify a reference object on the road—anything will do—and align the vehicle with this reference while driving. Adjust the direction if any deviation occurs. 3. Hold the steering wheel steady: Often, drivers inadvertently move the steering wheel when shifting gears, causing the vehicle to deviate from its intended path. Therefore, it's crucial to keep the steering wheel steady during gear shifts and make corrections regardless of the vehicle's speed.
17
1
Share

Is the Jetta classified as a subcompact or compact car?

The Jetta belongs to Volkswagen's compact car category. Jetta Exterior: The Jetta adopts Volkswagen's latest design language, built on the MQB platform, featuring a sharply contoured front fascia. The headlights and front grille boast an elegant design, complemented by five-spoke alloy wheels and distinctive taillights that enhance the vehicle's visual appeal. Jetta Interior Space: The Jetta offers a comfortable and spacious interior with symmetrical, clean, and robust design elements accented by abundant chrome trim. It comes equipped with an upgraded 6-speaker audio system and a thoughtfully designed multifunctional smart trip computer. This system promptly and accurately displays driving information such as exterior temperature, instant fuel consumption, and overspeed alerts, while also featuring a maintenance reminder function for easy tracking of remaining mileage and days until the next service.
7
0
Share

What is the operating procedure for refrigerant charging?

Before charging the refrigerant, evacuate the system for 1 hour and ensure there are no leaks and the system is under absolute vacuum. Open the cylinder with the valve facing downward, loosen the middle hose connection of the pressure gauge, open the high-pressure side manual valve, and charge liquid refrigerant from the high-pressure side. When the pressures on the high and low-pressure gauges balance and no longer rise, close the high-pressure side manual valve, turn the R134a cylinder valve upward, and let it stand for more than five minutes. Start the air conditioner, open the low-pressure side manual valve, and charge gaseous refrigerant (not liquid) from the low-pressure side. The engine speed should be maintained at 800-1200 rpm. During the refrigerant charging process, observe the refrigerant flow through the sight glass. When the bubbles disappear, close the low-pressure side manual valve and remove the service pressure gauge.
4
2
Share

How to Coordinate the Clutch and Throttle When Shifting Gears?

Press the clutch pedal, quickly release the throttle, shift to the desired gear, match the appropriate throttle, and then gently release the clutch pedal after stabilizing. The key is to achieve a one-time throttle adjustment and a one-time clutch engagement point adjustment, with the throttle adjustment slightly earlier than the clutch engagement point. Upshifting is essentially for acceleration, requiring you to press the throttle to provide power to the engine, and then upshift when the speed is appropriate. Downshifting is the act of gradually shifting to a lower gear after deceleration, requiring corresponding operations based on the car's speed, and it's necessary to release the throttle.
16
1
Share

What are the detailed steps for the C2 Subject 2 driving test?

According to the scheduled test time for Subject 2, the instructor will take the candidate to the test site in advance. After entering the test site, swipe your ID card for identity verification to enter the waiting area. The candidate's name and test car number will appear on the electronic screen, then wait for the call. After hearing the call, enter the test area and find your assigned test car. Hand your ID card to the examiner for verification and facial recognition. Once completed, begin the pre-start preparations. After preparations are complete, inform the examiner to start the assessment. Perform the following tasks in order: reverse parking—parallel parking—curve driving—right-angle turn—slope fixed-point parking. If you fail the first attempt, drive back to the starting point and begin the second assessment. If you pass the test, return to the waiting area to sign and confirm your score, then leave.
11
2
Share

Where is the oil filter located on the BMW 120i?

The oil filter on the BMW 120i is located at the front lower side of the engine in the front of the car. Function of the oil filter: The oil filter, also known as the oil filter element, is designed to remove impurities, sludge, and moisture from the engine oil, delivering clean oil to all lubrication points. Engine oil inherently contains a certain amount of sludge, impurities, moisture, and additives. During engine operation, metal particles, airborne contaminants, and oil oxidation byproducts increase the level of impurities in the oil. If unfiltered oil enters the lubrication circuit, these impurities can reach the friction surfaces of moving parts, accelerating wear and reducing the engine's lifespan. Oil filter grades: Due to the high viscosity of engine oil and the elevated level of contaminants, oil filters generally consist of three stages to enhance filtration efficiency: the oil suction filter, the primary oil filter, and the secondary oil filter.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.