Where is the battery jump-start location for the Audi A4?

Where is the fuel tank switch of Borgward BX5?

The fuel tank cap switch of Borgward BX5 is located on the right side of the vehicle. Common methods to open the fuel tank cap: 1. Mechanical key method. This type of fuel tank cap switch is relatively rare and is usually found on some rugged off-road vehicles. Nowadays, family cars do not use mechanical keys to open the fuel tank cap because it is relatively complicated to use. 2. In-car switch method. The in-car switch is currently the most common way to open the fuel tank door, and it is certainly more convenient than using a key. The in-car switch is located in different positions in different car models. Some are on the floor to the left of the driver's seat, some are on the left front door panel or on the center console, all marked with a fuel pump icon. However, it should be noted that the in-car switch can easily make the owner forget to turn off the engine before refueling, so the owner should remember to turn off the engine before refueling. 3. Press-type opening method. The press-type opening of the fuel tank door is currently the most convenient method. The owner only needs to park the car, and the refueling staff can directly refuel. However, when the owner is not parking for refueling, remember to lock the central control, otherwise the fuel tank cap can be opened. Here is some additional information: 1. It is recommended to refuel with 95-octane gasoline. 2. The fuel tank cap switch of Borgward BX5 only needs to be pressed when the vehicle is unlocked to open the fuel tank cap.

8

5

Share

What is the red liquid in a car?

The red liquid in a car is antifreeze coolant. Here is an introduction to coolant: Introduction to coolant: Coolant, whose full name should be antifreeze coolant, means coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator and freezing the engine cylinder block when the car is parked in cold seasons. Functions of coolant: Winter antifreeze. In order to prevent the coolant from freezing and causing the water tank and engine block to crack after the car is parked in winter, the freezing point of the coolant should be about 10 degrees Celsius lower than the lowest temperature in the area, in case of sudden weather changes; Anti-corrosion. The radiator, water pump, cylinder block and cylinder head, water distribution pipe and other components in the cooling system are made of steel, cast iron, brass, copper, aluminum, solder and other metals. Due to the different electrode potentials of different metals, electrochemical corrosion is prone to occur under the action of electrolytes. At the same time, the acidic products formed after the decomposition of glycol substances in the coolant and the acidic exhaust gas after fuel combustion may also penetrate into the cooling system, promoting the corrosion of the cooling system. Corrosion of the cooling system will cause failures in the lower water chamber of the radiator, the nozzle sleeve, cooling pipes, joints and radiator pipes, while corrosion products will block the pipes, causing the engine to overheat or even break down. If corrosion perforation occurs, the coolant seeping into the combustion chamber or crankcase will cause serious damage, because when the coolant or water is mixed with engine oil, oil sludge and gum will be produced, weakening lubrication and causing valves, hydraulic valve push rods and piston rings to stick. Therefore, a certain amount of anti-corrosion additives are added to the coolant to prevent corrosion in the cooling system; Anti-scaling.

15

5

Share

How Many Times Can You Retake the Driving License Test Subject 1?

There is no limit to the number of retakes for Subject 1. According to Article 10 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," you can take the Subject 1 retest twice on the same day. If you fail the first attempt, you can retake it for free a second time. If you still fail the second attempt, the Subject 1 test will be terminated, and you can only schedule another test after ten days. Subject 1, also known as the theoretical driving test or driver's theory exam, is part of the motor vehicle driving license assessment. The test content includes theoretical driving knowledge, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. The passing score for Subject 1 is 90 out of 100. The test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content includes: driving license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Test precautions for Subject 1: Candidates should dress appropriately (no slippers) and are not allowed to bring electronic devices or bags into the examination room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. After entering the examination room, the identity verification desk will assign a seat. Once seated, begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it—unsigned reports are invalid. For Subject 2 and Subject 3, there are only five test attempts each. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safety and civilized driving knowledge test, the previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge tests. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject 4."

19

2

Share

Why does an electric car suddenly stop moving when it has power?

Electric vehicles may suddenly become unable to move despite having power due to reasons such as a damaged vehicle controller or motor failure. Below is a detailed introduction about car driving: Overview: Car driving is one of the basic skills that modern people need to master. To master car driving (driving-a-motor-vehicle) techniques, one must meet the required age and physical conditions; and undergo training and examinations on road traffic safety laws and regulations, relevant automotive mechanical knowledge, and safe driving practices. Other: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formalized procedure that must be issued by a specialized authority.

20

0

Share

Can Fuel Additives and Three-Way Catalytic Converter Cleaners Be Used Simultaneously?

Fuel additives and three-way catalytic converter cleaners should not be used together. Additional information: The functions of automotive fuel additives are as follows: The cleaning and activating factors in fuel additives can remove harmful substances such as gum deposits in fuel and engine carbon buildup. After five consecutive uses of fuel additives, carbon deposits on the exhaust pipe are significantly reduced, including in the filter, exhaust valve, and fuel system. The nano-components in fuel additives encapsulate gum deposits, creating gaseous "micro-explosions" in the combustion chamber under high temperatures, which promote secondary atomization of fuel and ensure complete combustion, thereby enhancing engine power. Over 90% of vehicles experience a noticeable improvement in power after the first use of fuel additives.

1

0

Share

What does glass oil film mean?

Oil film refers to a layer of grease and impurities adhered to the car window glass. There are several causes of automotive glass oil film formation: First, vehicle exhaust - exhaust emissions contain various pollutants from incomplete combustion. Frequent traffic congestion in urban areas, especially when driving behind trucks, inevitably leads to these substances adhering to the glass and forming an oil film. Second, oil smoke pollution - if frequently parked near restaurant chimneys, accumulated grease and dirt will gradually form thick oil stains if left untreated. Additionally, insect remains and bird droppings, which are highly corrosive, can harden on the glass if not cleaned, affecting transparency and potentially developing into oil films. Lastly, tree resin - vehicles regularly parked under trees may accumulate sap and fruit residues.

14

1

Share

Where is the battery jump-start location for the Audi A4?

Where is the fuel tank switch of Borgward BX5?

What is the red liquid in a car?

How Many Times Can You Retake the Driving License Test Subject 1?

Why does an electric car suddenly stop moving when it has power?

Can Fuel Additives and Three-Way Catalytic Converter Cleaners Be Used Simultaneously?

What does glass oil film mean?

What is the tire model of the Trumpchi GS8?

Where is the handbrake of the Mercedes-Benz C260?

Can a car still be inspected after 4 years of inspection overdue?

What is the structure of an automobile fuel tank?