Where is the Baojun 730 produced?

Why Doesn't a Tire Leak When Nailed?

A tire may not leak immediately when a nail first punctures it if the nail is tightly lodged. However, as the car continues to drive, the nail will penetrate deeper, causing increasing damage to the tire. Eventually, gaps will form at the puncture site, leading to air leakage. Sometimes, if the nail is short and doesn't pierce the tire's airtight layer, the tire won't lose air right away. But since the tire's structure is compromised, there's still a risk. Tire Pressure Monitoring: It's often difficult to immediately notice a punctured tire. Therefore, it's important to regularly check tire pressure. If you don't have a tire pressure gauge, it's recommended to walk around the car before each trip and step on the tires to gauge if the pressure is normal based on experience. For example, one of our editor's car-owner friends had two nails in his tire but avoided potential danger by promptly checking the tire pressure. With tire pressure monitoring, you can keep an eye on the pressure at all times and prevent hazards. Immediate Tire Replacement: If you notice rapid air loss, never force the car to keep driving. Continuing to drive not only risks ruining the entire tire but also poses extreme danger to the driver. The correct approach is to stop immediately and replace the tire with the spare.

2

0

Share

What Causes Scratches on the Hood?

Scratches on the hood are caused by branches scraping against it during driving and stones hitting it. The hood is an important component of a car's overall appearance. By improving the strength and structure of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rainwater, and electrical interference, thereby fully protecting the normal operation of the vehicle. The hood is made of rubber foam and aluminum foil materials, which not only reduce engine noise but also isolate the heat generated during engine operation, effectively protecting the paint on the hood surface and preventing aging. The shape of the hood can effectively adjust the direction and form of reflected light, thereby reducing the impact of light on the driver.

15

4

Share

How long in advance can I renew my driver's license before it expires?

You can renew your driver's license 90 days before it expires. Within ninety days before the expiration of the motor vehicle driver's license, you should apply for renewal at the vehicle management office where the license was issued. When applying, you need to fill out the "Motor Vehicle Driver's License Application Form". Documents required for renewal: Bring two copies of your ID card, two recent 1-inch color photos without a hat, the original ID card, the original driver's license, and a medical examination certificate from a county-level or above hospital (you can also get a free medical examination at the vehicle management office). Renewal process: The motor vehicle driver should bring the required documents to the vehicle management office where the license was issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Regulations on the expiration of driver's licenses: If the license has been expired for less than one year, it can be renewed normally; if it has been expired for more than one year but less than three years, the license will be canceled, but it can be renewed by passing the subject one test; if it has been expired for more than three years, the license will be invalid and cannot be renewed.

6

2

Share

Should the hood be repaired or replaced after being dented?

If there are no severe wrinkles or perforations, and only minor deformation, it can be repaired through reshaping. You can refer to the assessment results from the damage assessor to decide. The hood is made of rubber foam and aluminum foil materials, which not only reduce engine noise but also isolate the heat generated during engine operation, effectively protecting the paint on the hood's surface. Additional information: Airflow guidance: For objects moving at high speed in the air, the air resistance and turbulence generated around the moving object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resulting resistance, reducing the impact of airflow on the car. Through airflow guidance, air resistance can be decomposed into beneficial forces, increasing the ground force on the front tires, which enhances driving stability. The streamlined design of the hood is largely based on this principle. Engine protection: Beneath the hood are critical components of the car, including the engine, electrical circuits, fuel system, braking system, and transmission system, among others. By enhancing the strength and structure of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle's proper operation. Aesthetics: The exterior design of a vehicle is a direct reflection of its value. As a significant part of the overall appearance, the hood plays a crucial role in being visually pleasing and embodying the concept of the entire car.

9

4

Share

Is the Beidou Card Mandatory for Drivers?

Drivers operating medium-sized or large trucks are required to obtain a Beidou card. Failure to do so may result in penalties imposed by transportation authorities. According to the "Road Transport Vehicle Dynamic Supervision and Management Regulations," if the Beidou satellite positioning system on the vehicle is malfunctioning, the vehicle cannot be used for transportation. Violations of this regulation may incur a fine of 800 RMB. However, more severe penalties ranging from 2,000 to 5,000 RMB apply for illegal activities such as damaging the device, interfering with, or blocking signals. Below are the relevant details: 1. Explanation of the Beidou Card: Most Beidou recorders will prompt the driver to log in after inserting the driver information card. To verify if the driver card is functioning correctly, a small receipt can be printed to check the driver's information, including the driver's license number and name. If discrepancies are found, the driver can prepare their ID card, vehicle registration, and operating permit to visit the local Beidou service provider for adjustments or corrections. Some regions support electronic or online processing. 2. User Information: The Beidou card must contain the driver's own information. If the Beidou driver card does not match the driver's identity and is discovered by traffic police, penalties ranging from 2,000 to 5,000 RMB may be imposed, along with orders for rectification, as per relevant regulations when the actual driver's identity does not match the information on the IC card inserted into the Beidou terminal.

1

5

Share

How to distinguish between 2009 and 2019 car glass?

The numbers on the car glass are all 9. If the vehicle's production date is between 2008-2009, then the glass is from 2009; if the production date is between 2018-2019, then the glass is from 2019. The glass and the vehicle's production date will not differ by 10 years. Below is relevant information: 1. Car window glass production date: The production date of car window glass consists of several dots and a number. Regardless of the car glass specification, there is a string of symbols in the lower left corner of the glass, with a corresponding number below the symbols indicating the production year. This string of numbers can be used to check the production date of the car window glass. The number represents the year of production, and the small black dots represent the month of production. If the small black dots are in front of the number, subtract the number of dots from 7; if the small black dots are behind the number, subtract the number of dots from 13. The result is the production month of the glass. 2. Car window: The car window (car-window) is an important part of the entire vehicle body, meeting the needs of interior lighting, ventilation, and the visibility of drivers and passengers. Car windows are categorized by the installation position of the glass: front and rear windshields, side windows, and door windows. The design, structure, and quality of the car window significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics.

14

5

Share

Where is the Baojun 730 produced?

Why Doesn't a Tire Leak When Nailed?

What Causes Scratches on the Hood?

How long in advance can I renew my driver's license before it expires?

Should the hood be repaired or replaced after being dented?

Is the Beidou Card Mandatory for Drivers?

How to distinguish between 2009 and 2019 car glass?

What damage does turning off the car without shifting to P gear cause?

Should the Battery Be Replaced After Jump-Starting a Car?

What should be paid attention to when driving on ice and snow roads?

What is the actual fuel consumption of the RAV4 2.0?