Where is the auxiliary battery located in the Volvo XC60?

Is the Baojun 310 compliant with China 6 emission standards?

The Baojun 310 has models that meet the China 6 emission standards. More details about the Baojun 310 are as follows: 1. The Baojun 310 offers two powertrains with different displacements: a 1.2L naturally aspirated engine and a 1.5L-DVVT naturally aspirated engine, paired with a 6-speed manual transmission and a 5-speed automatic manual transmission, respectively. 2. The Baojun 310 features a 'double U' front fascia design, with a three-bar grille at the front, sharp-looking headlights equipped with lenses, and L-shaped daytime running lights. On the side profile, the vehicle adopts a dual waistline design, with a novel lower waistline, and comes with roof rails.

2

Share

How to Steer by Reference Points in the Curve Driving Test (Subject 2)?

Steering techniques for the S-curve driving in Subject 2: 1. Before entering the S-curve, straighten your vehicle and position it at the center of the road by aligning the front of your car. 2. When the left edge of the engine hood aligns with the yellow lane marking, turn the steering wheel one full rotation to the left to complete the first curve. 3. Follow the edge markings while steering, making minor adjustments if deviations occur. 4. After completing the first curve, straighten the wheels and continue driving along the yellow line without crossing it, maintaining constant observation. 5. Upon exiting the curve, ensure your vehicle is straightened before driving out.

11

5

Share

What is the first maintenance mileage for the Haval H6?

First free maintenance is performed at 3,000 kilometers. Below are precautions regarding the first car maintenance: Maintenance schedule: Try not to delay maintenance. Coordinate with the 4S store in advance. The vehicle has nationwide warranty coverage. Regardless of where the car was purchased, you can go to any local 4S store for maintenance. Complete the maintenance promptly when due. Maintenance items: Make an appointment before maintenance and bring the vehicle license and maintenance manual. During maintenance, strictly follow the regulations in the maintenance manual. During car maintenance, be sure to inspect the car chassis for any oil leaks or seepage. Address any issues as early as possible. Changes in the vehicle after first maintenance: Many cars may experience increased fuel consumption and insufficient power after the first maintenance, which is normal. This occurs because the factory-installed engine oil generally performs better than the oil used during first maintenance. Moreover, the newly added oil is still in the break-in period, and these issues will resolve after some time.

3

4

Share

How often should the car's cabin air filter be replaced?

The cabin air filter should generally be replaced every 10,000 to 20,000 kilometers or every 1 to 2 years. Functions of the cabin air filter: It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. It separates solid impurities such as dust, pollen, and abrasive particles from the air. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., with strong and long-lasting moisture absorption. It prevents the car windows from fogging up, ensuring clear visibility for drivers and passengers, thereby enhancing driving safety. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes. Precautions for replacing the cabin air filter: Purchase cabin air filters produced by reputable manufacturers. Always turn off the car engine before replacing the cabin air filter. Pay attention to the installation direction of the filter to avoid installing it backwards.

11

1

Share

How much engine oil should be added to the Atenza?

The Atenza requires 4.4 liters of engine oil. More information about the Atenza is as follows: 1. The Atenza is a new generation mid-to-high-end sports sedan flagship model developed and manufactured based on Mazda's 'break the routine, start from scratch' spirit, continuing the design of the imported Mazda ATENZA. 2. The Atenza adopts the SKYACTIV-Chassis technology, equipped with high-performance MacPherson strut independent front suspension + multi-link independent rear suspension. Through structural optimization, it achieves both weight reduction and rigidity enhancement. 3. The interior of the Atenza uses a large amount of high-grade soft leather materials, a top-grain leather steering wheel, and leather decorative strips on the center console, offering an extraordinary sense of quality.

2

3

Share

Does a Broken Steering Gear Need to Be Replaced?

A damaged steering gear must be replaced. When the steering gear is damaged, it can lead to a lack of power assistance, making steering difficult or causing the power steering to fail entirely. This results in no power assistance and noticeable stiffness during operation. Issues such as excessively heavy steering, the steering gear locking up and preventing turning, and even abnormal tire wear can occur. The steering gear is one of the most commonly seen steering mechanisms. Its basic structure consists of a pair of meshing pinion gears and a rack. When the steering shaft rotates the pinion, the rack moves linearly. In some cases, the rack directly drives the tie rod, enabling the steering wheels to turn. To dampen steering wheel vibrations, steering dampers are often added to systems with rack-and-pinion steering gears. Daily maintenance tips for the steering gear: When driving on uneven or bumpy roads, reduce speed to minimize the load on the steering gear. Regularly inspect the protective boots on both sides of the steering gear and the condition of the boot connecting the steering gear to the universal joint. Damaged boots are the primary cause of early wear and failure in steering gears. Once a boot is damaged, water, dust, and sand can enter the steering gear, disrupting the lubricating grease film on the rack and pinion. This leads to internal rusting, abnormal wear, and other issues. If the internal contaminants are not promptly removed, the steering gear can quickly become irreparable. Therefore, inspect the dust boots at least once a month. If any damage is found, replace them immediately and conduct a thorough inspection and maintenance of the steering gear beforehand. Due to the harsh operating conditions and heavy loads, the steering gear requires specialized lubricating grease, as ordinary grease cannot meet its performance demands.

19

1

Share

Where is the auxiliary battery located in the Volvo XC60?

Is the Baojun 310 compliant with China 6 emission standards?

How to Steer by Reference Points in the Curve Driving Test (Subject 2)?

What is the first maintenance mileage for the Haval H6?

How often should the car's cabin air filter be replaced?

How much engine oil should be added to the Atenza?

Does a Broken Steering Gear Need to Be Replaced?

How to Open the Sunroof on the Volkswagen Lavida?

Where is the air conditioning filter located in the Golf 7?

What type of oil should be used for a Honda Civic?

Can out-of-town vehicles undergo annual inspection in another location?