Where is the auxiliary battery located in the Jeep Compass?

2 Answers
OMarley
07/25/25 2:44pm
The auxiliary battery of the Jeep Compass is located under the footwell carpet on the passenger side, while the main battery is positioned beneath the passenger seat. A car battery, also known as a storage battery, is a type of battery that operates by converting chemical energy into electrical energy. Car battery maintenance: Use a damp cloth to wipe the exterior of the battery, cleaning off dust, grease, white powder, and other contaminants on the terminals that may cause leakage. Regular cleaning prevents the accumulation of white acidic corrosion powder on the terminals and extends the battery's service life. Open the battery's water filler caps to check if the water level is within the normal range. Typically, there are upper and lower limit markers on the battery's side for reference. If the water level is below the lower marker, distilled water must be added. If distilled water is not immediately available, filtered tap water can be used as an emergency measure. Do not overfill; the standard is to fill to the midpoint between the upper and lower markers. Types of car batteries: Car batteries are categorized into conventional lead-acid batteries and dry-charged batteries.
Was this review help?
16
0
Share
BarrettMarie
08/11/25 9:12pm
Hey buddy, last time I helped my sister check the auxiliary battery location in her Jeep Compass, I remember it's usually in the trunk area. You just need to open the trunk, lift up the floor mat or the cover beneath it, and you'll find this small battery in the right rear corner or left side corner. It's mainly designed to power the auto start-stop function, assisting the main battery during engine restart. For some model years like post-2018 versions, it's often placed in the trunk for easier inspection and to prevent heat damage from the engine. When checking, it's recommended to operate with the engine off, handle gently without pulling wires, and wearing gloves is safer. If you're not sure, just visit a repair shop - they can sort it out in a minute, no need to take risks. Regularly checking it during drives and avoiding heavy luggage pressure can extend its lifespan and ensure safe travels.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Where to Get the Physical Examination Items for Driver's License Annual Review?

Introduction to the location for driver's license renewal physical examination: 1. If the vehicle management office provided a physical examination when you initially applied for the driver's license, then the renewal physical examination will also be conducted at the vehicle management office. 2. If the vehicle management office does not provide a renewal physical examination, then the driver must go to a county-level or military medical institution at or above the regiment level for the physical examination, and then submit the physical condition certificate to the vehicle management office, which will issue a receipt. Notes for driver's license renewal: 1. Before renewal, ensure that all violations and other matters have been handled, fines paid, and points cleared; otherwise, the vehicle management office will not issue the renewal. 2. Within 90 days before the expiration of the driver's license, you can apply for renewal at the vehicle management office where the license was originally issued. 3. If during the validity period of the driver's license, any scoring cycle records 12 points, you will not be eligible for a renewal with a longer validity period. 4. If the driver's license has expired for less than one year, the renewal can still be processed normally; if the license has expired for more than one year but less than three years, the license will be canceled, but you can still process the renewal by passing the subject one exam; if it has expired for more than three years, the license will be invalid and cannot be renewed.
9
5
Share

Is it mandatory to conduct driver's license review at the issuing location?

Driver's license annual review does not have to be conducted at the issuing location; it can be processed at locations other than the issuing place. A motor vehicle driver's license is a legal document issued by the administrative authorities to individuals who have legally learned to drive motor vehicles, mastered traffic regulations and driving skills through study, and passed the official examination, permitting them to drive certain types of motor vehicles. Below is a relevant introduction to the subject examination content: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge examination (Subject 1) - written test, computer-based, with a full score of 100, and a passing score of 90 or above (including 90). 2. Subject 2: Field driving skills examination (Subject 2) - conducted on-site with actual vehicles. Results are only categorized as pass or fail. The five mandatory tests conducted in sequence include reversing into a garage, parallel parking, S-curve driving, right-angle turning, and hill start and stop. The full score is 100, with a passing score of 80 or above (including 80). 3. Subject 3: Road driving skills examination (Subject 3) - conducted on highways or simulated sites with actual vehicles. The full score is 100, with passing scores of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safe and civilized driving related knowledge (Subject 4) - written test, with a full score of 100, and a passing score of 90 or above (including 90).
9
0
Share

Can the Wuling Hongguang Mini be driven in snowy weather?

According to officially released data, the Bao Lai comes with two engine displacements: 1.4T and 1.5T. The 1.4T model accelerates from 0-100 km/h in 8.3 seconds, while the 1.5T model takes 13.7 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, leading to naturally faster acceleration. The Bao Lai 1.4T model has a maximum torque of 250 Nm and accelerates from 0-100 km/h in 8.3 seconds. The Bao Lai 1.5T model has a maximum torque of 145 Nm and accelerates from 0-100 km/h in 13.7 seconds. The Xing Rui 2.0T has a torque of 300 Nm and accelerates from 0-100 km/h in 7.9 seconds. Transmission efficiency: The transmission serves as the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission (DCT) > wet dual-clutch transmission > automatic transmission (AT) > continuously variable transmission (CVT). The Bao Lai 1.4T model is equipped with a dry dual-clutch transmission (DCT), while the Bao Lai 1.5T model uses a manual-automatic transmission (AT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Xing Rui has a power-to-weight ratio of 127 Hp/T and accelerates from 0-100 km/h in 7.9 seconds. The Bao Lai 1.4T has a power-to-weight ratio of 114 Hp/T and accelerates in 8.3 seconds, while the Bao Lai 1.5T has a ratio of 88 Hp/T and takes 13.7 seconds.
15
2
Share

What is the engine model of the Fista?

The 1.4T version of the Fista uses the G4LD engine model, with a maximum power of 103kW and a maximum torque of 240Nm. The 1.6T version is equipped with the G4FJ engine, delivering a maximum output power of 150kW and a maximum torque of 265Nm. The Fista engine is a domestically produced engine manufactured by Beijing Hyundai. For daily maintenance of the Fista engine, the following methods can be applied: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, bypassing through the relief valve and bringing contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
6
4
Share

What is automotive OBD?

Automotive OBD is the On-Board Diagnostics system, which continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards and will issue an immediate warning if they do. When a system malfunction occurs, the malfunction indicator lamp or check engine warning light will illuminate, while the powertrain control module stores the fault information in memory. Through specific procedures, the fault codes can be read from the PCM. Based on the fault code prompts, maintenance personnel can accurately determine the nature and location of the fault. The OBD interface in vehicles is generally located in the interior trim panel below the steering wheel, near the driver's knee area.
8
4
Share

What are the reasons for the engine fault warning light to illuminate?

The reasons for the engine fault warning light to illuminate are: 1. Poor combustion state; 2. Poor fuel quality; 3. Dirty engine cylinder interior with carbon deposits. The engine fault signal on the car dashboard is issued by the ECU (Engine Control Unit), which controls all electronic devices of the entire engine, such as the electronic throttle, fuel injectors, alternator, fuel pump, etc., covering various systems including intake, exhaust, fuel, ignition, and timing. When the engine fault light comes on, the owner should start and turn off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, and then reconnect it.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.