···
Log in / Register

Where is the AUX interface located in the eighth-generation Accord?

1 Answers
DelJulianna
08/30/25 5:20am

The AUX interface of the eighth-generation Accord is located inside the center armrest. AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio from electronic devices can be transmitted through the headphone jack and AUX interface to the car audio system, allowing playback through the car's audio broadcasting facilities. When using it, insert one end of the connection into the AUX interface and the other end into a video player such as a mobile phone, MP3, or MP4. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will stop (the interface is typically a standard 3.5mm headphone jack). Aux is short for Auxiliary, which refers to an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. When special applications are needed, such as additional audio output or input, these terminals can be utilized. These backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port mainly used for remote configuration, dial-up connections, or connecting with a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because they are suited for different configuration environments. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are typically impossible in user mode, such as initialization, restoring default settings, or correcting abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, functions like remote configuration and line backup for hardware products can be achieved. Note: When using the AUX interface, ensure you purchase the correct connecting cable and avoid plugging the audio cable into the wrong port. It is best to follow the usage steps outlined in the product's instruction manual. If you are still unsure, you can consult the product's official website or call for assistance.

Was this review help?
1
5
Share
More Forum Discussions

What are the tire specifications for the BMW X5?

The tire specifications for the BMW X5 2022 xDrive 40Li Premium M Sport Package are 275/40 R21 and 315/35 R21; for the BMW X5 2022 xDrive 30Li Premium M Sport Package, they are 275/45 R20 and 305/40 R20. The numbers 275, 305, and 315 represent the tire's section width in millimeters (275mm, 305mm, and 315mm, respectively). The numbers 45, 40, and 35 indicate the aspect ratio of the tire's section height to its width (45%, 40%, and 35%, respectively). The 'R' stands for radial construction, and the numbers 20 and 21 denote the rim diameter in inches. The front tires of the car are slightly larger in diameter, but the tire pressure differs between the front and rear tires. The front tire pressure is 3.2 bar when unloaded and 3.9 bar when fully loaded, while the rear tire pressure is 3.5 bar when unloaded and 4.6 bar when fully loaded. Higher tire pressure increases the tire diameter, but during normal use of the BMW X5, the diameters of the front and rear tires are almost identical. The BMW X5 does not experience abnormal tire wear, speed inaccuracies, or tire pressure warning light issues due to the slight difference in tire sizes. Tires are the only components of a car that come into direct contact with the ground, and they play a crucial role in the vehicle's driving stability and safety. The BMW X5 features an on-demand all-wheel-drive system, but it primarily operates as a rear-wheel-drive vehicle. This design gives the rear tires a wider width, providing enhanced grip. The front wheels are only engaged to distribute power when the rear wheels slip or under specific road conditions. In addition to the model specifications, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
2
4
Share

What is running a red light when turning right?

Running a red light when turning right: On a right-turn road with traffic lights, when the right-turn traffic light is red, it is considered running a red light. According to Article 40 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Lane traffic signals indicate: When the green arrow light is on, vehicles in this lane are allowed to proceed in the indicated direction; when the red cross-shaped light or arrow light is on, vehicles in this lane are prohibited from proceeding. Article 41: The arrow directions of directional signal lights indicate left turn, straight, and right turn when pointing left, upward, and right, respectively. If it is an arrow light, you cannot turn right when it is red; if it is a full-screen light, you can generally turn right when it is red. According to Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law": When the red light is on, right-turning vehicles may proceed provided they do not hinder the passage of released vehicles and pedestrians. To determine whether a vehicle has run a red light, electronic eyes need to capture three photos. These are: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. If the right-turn signal light is a red arrow, the vehicle should stop within the stop line and wait for the green light before proceeding. Turning right when the right-turn arrow is red is considered running a red light. If the right-turn signal light is not a red arrow, turning right is allowed. When the full-screen light is red, the following situations must be noted; otherwise, 6 points may be deducted. Special instructions: When the red light is on, turning right is prohibited: If there is an auxiliary sign next to the full-screen light stating: "No right turn when red light is on," or a no-right-turn sign, even if it is a full-screen red light, turning right is not allowed. Otherwise, it will be penalized as running a red light, with 6 points deducted. When turning right, yield to pedestrians: Although turning right is allowed with a full-screen light, always remember to yield to pedestrians. Otherwise, a fine will be imposed, and 3 points will be deducted. Straight lanes: No right turns allowed: When turning right, you must be in the right-turn lane. You cannot turn right from a straight lane. Only in a right-turn lane or a lane that allows both straight and right turns can you turn right. Turning right from a straight lane is considered not following the guided lane, resulting in a 2-point deduction.
7
1
Share

What is the normal tire pressure for a Volkswagen Bora?

The normal tire pressure range for a Volkswagen Bora is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard regulations and requirements. The Bora uses an indirect tire pressure monitoring system. This type of tire pressure monitoring device does not display the tire pressure but will only alert when the tire pressure is abnormal. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the tire pressure gauge against the tire valve to measure and read the value, and remember to replace the valve cap after measuring. Generally, a tire pressure above 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates localized wear of the central tread pattern, shortening tire lifespan; increases body vibration, indirectly affecting the lifespan of other components; causes excessive stretching and deformation of tire cords, reducing tire elasticity and increasing the load on the car during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing safety risks; increases movement of various tire parts, leading to abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, leading to tire bead damage and abnormal wear. Puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Usually, it alerts when the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are needed. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to come on. Simply reset the tire pressure in this case. Damaged tire pressure sensor. The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If damaged during driving, it will trigger the tire pressure warning light. For sensor damage, only a complete replacement is possible. The normal tire pressure for a Volkswagen Bora is 2.3-2.4bar. Strictly speaking, tire pressure refers to the air pressure inside the tire. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates localized wear of the central tread pattern, shortening tire lifespan; increases body vibration, indirectly affecting the lifespan of other components. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing safety risks; increases movement of various tire parts, leading to abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, leading to tire bead damage and abnormal wear. Puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts, leading to tire bursts. In summer, tire pressure can generally be about 0.1bar lower than the standard to avoid high-temperature blowouts.
6
4
Share

What is the horsepower of the Magotan 2.0T?

The maximum horsepower of the Magotan 2.0T is 200PS. Here is more information about the Magotan 2.0T: 1. Power: The Magotan 2.0T is a sedan developed by Magotan, equipped with a 16532.0TL4 engine. 2. Exterior: The exterior design of the Magotan was carefully crafted by German experts, incorporating the latest fashion elements in car design.
14
2
Share

Which is More Fuel-Efficient: Automatic or Manual Transmission?

Generally, manual transmission vehicles are slightly more fuel-efficient than automatic ones. Here are the relevant details: 1. For vehicles of the same brand, model, and engine displacement, manual transmissions typically offer slightly better fuel economy than automatics. However, this isn't an absolute rule as many factors affect fuel consumption, including road conditions, fuel quality, driving habits, and vehicle maintenance. 2. Most manual transmission cars use gearbox shifting, which provides high mechanical transmission efficiency with minimal delay, resulting in excellent power output efficiency. Automatic transmissions rely on transmission fluid and torque converters for power transfer, which leads to greater transmission power loss.
20
4
Share

What Causes a Car to Stall When Starting?

Car stalling during startup can be caused by insufficient driving skills or the use of substandard fuel leading to engine carbon buildup. Below is relevant information: 1. Anti-theft device not deactivated. 2. Excessive carbon buildup in the throttle, spark plugs, cylinders, fuel lines, and intake manifold. 3. Ignition system malfunction. 4. Low-voltage circuit failure. 5. Insufficient cylinder pressure. 6. Low fuel level in the tank or inadequate fuel pump pressure. 7. Leakage in the distributor wires; engine malfunction. 9. Clogged single or multiple fuel injectors.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.