Where is the autonomous driving feature in Mercedes-Benz?

Can a car still be driven if coolant enters the engine oil?

Coolant entering the engine oil means the car cannot be driven. The symptoms include: 1. The engine oil level will rise; 2. The oil pressure will drop; 3. Water droplets will appear on the oil filler cap; 4. Water vapor and droplets will be discharged from the exhaust pipe; 5. Oil stains will appear above the engine radiator. The functions of coolant are: 1. To prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block when the car is parked in cold weather; 2. To prevent corrosion of metal parts and aging of rubber components; 3. To reduce the formation of scale, which could block circulation pipes and affect the cooling system's heat dissipation function; 4. To prevent the engine from overheating and ensure it operates at the proper working temperature; 5. To provide lubrication for the water pump thermostat and other components.

14

0

Share

What to Do If There Is Excessive Oil in the Ford Focus Cylinder Combustion System?

Ford Focus cylinder combustion system excessive oil treatment methods are: 1. Check and clean the engine carbon deposits; 2. Check if the spark plugs are functioning normally; 3. Check if the oxygen sensor is working properly. The Ford Focus is a compact car. Taking the 2021 Ford Focus Manual Fengyue model as an example, its body dimensions are: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, and fuel tank capacity 53l. The 2021 Ford Focus Manual Fengyue model is equipped with a 1.5l naturally aspirated engine, with a maximum power of 90kw, maximum power speed of 6500rpm per minute, maximum torque of 153nm, maximum torque speed of 4500rpm per minute, matched with a 6-speed manual transmission.

5

4

Share

Does the Qashqai have a front anti-collision steel beam?

The Qashqai is equipped with a front anti-collision steel beam. The anti-collision steel beam is a U-shaped channel pressed from cold-rolled steel plates, connected to the frame longitudinal beams. It serves as an important safety device to absorb and mitigate external impact forces, protecting the front and rear parts of the vehicle body. The Qashqai is a compact SUV under Dongfeng Nissan, with body dimensions of: length 4401 mm, width 1837 mm, height 1593 mm, a wheelbase of 2646 mm, and a fuel tank capacity of 57 liters. The Qashqai is powered by a 2.0L naturally aspirated engine, with a maximum power of 111 kW and a maximum power speed of 6000 rpm. It adopts a front-engine, front-wheel-drive layout, with MacPherson strut independent suspension at the front and multi-link independent suspension at the rear.

5

2

Share

What are the symptoms of front and rear oxygen sensor failure?

The symptoms of front and rear oxygen sensor failure are: 1. The engine experiences unstable idle, misfire, and surging; 2. It increases the exhaust pollution of the engine. The diagnostic methods for front and rear oxygen sensor failure are: 1. Warm up the engine to normal operating temperature; 2. Connect the negative probe of the multimeter's voltage range to E1 in the fault detection socket or the negative terminal of the battery, and the positive probe to the OX1 or OX2 socket in the fault detection socket or the output wire on the oxygen sensor harness connector; 3. Keep the engine running at 2500 rpm and check if the voltmeter needle swings between 0 and 1V, recording the number of swings in 10 seconds; 4. Check if the oxygen sensor is damaged; 5. Inspect the appearance color of the oxygen sensor.

13

5

Share

Should Car Windshield Washer Fluid Be Diluted with Water?

Whether car windshield washer fluid should be diluted with water depends on the specific situation: 1. Non-concentrated washer fluid is already pre-mixed and does not require water dilution; 2. Concentrated washer fluid needs to be diluted with water. The method for adding car windshield washer fluid is: 1. Open the front hood; 2. Open the washer fluid filler port; 3. Fill with washer fluid until reaching the marked level. The performance and characteristics of washer fluid are: 1. Cleaning performance: Composed of various surfactants and additives, surfactants have wetting, penetrating, and solubilizing functions; 2. Antifreeze performance: Significantly lowers the freezing point of the liquid; 3. Anti-fog performance: Forms a single-molecule protective layer on the glass surface.

4

0

Share

What causes the jerking sensation when accelerating at low speeds in an automatic transmission car?

Automatic transmission cars experiencing jerking or surging during low-speed acceleration are often caused by engine-related issues. Additional details are as follows: 1. Engine function: Ignition, air intake, and fuel injection jointly determine fuel combustion, which is the power source of the engine. If the air intake decreases, ignition weakens, or fuel injection reduces, insufficient power output occurs, resulting in jerking sensations. 2. Situation explanation: Some jerking during automatic transmission vehicle acceleration is normal. For rapid acceleration, deep throttle application is required, causing the automatic transmission to downshift and increase engine RPM. When RPM reaches a certain level, upshifting occurs. Since RPM drops significantly after upshifting, relatively noticeable jerking may occur. This phenomenon is more common in automatic transmission models with fewer gears, such as 4-speed automatics. For smooth driving after starting an automatic transmission vehicle, gently pressing the accelerator pedal at appropriate times allows the transmission to upshift with minimal jerking. For better acceleration performance, deeper throttle application is needed, causing the transmission to upshift at higher speeds with more noticeable gearshift jerking.

12

2

Share

Where is the autonomous driving feature in Mercedes-Benz?

Can a car still be driven if coolant enters the engine oil?

What to Do If There Is Excessive Oil in the Ford Focus Cylinder Combustion System?

Does the Qashqai have a front anti-collision steel beam?

What are the symptoms of front and rear oxygen sensor failure?

Should Car Windshield Washer Fluid Be Diluted with Water?

What causes the jerking sensation when accelerating at low speeds in an automatic transmission car?

What is the function of the P gear in an automatic transmission?

What does the W in automatic transmission mean?

How often should the transmission fluid be changed in a Jetta?

How to reset the maintenance light on Fengshen AX7?