···
Log in / Register

Where is the automatic headlight sensor of Emgrand GS located?

3 Answers
CharlotteLee
09/06/25 4:02am
The automatic headlight sensor of Emgrand GS is located near the light lever gear. Switch to the AUTO gear to activate the automatic headlight function. Automotive headlight sensing device: Automatic headlights are controlled by light sensors installed on the vehicle body. The light sensors in cars are generally installed at the front of the center console, near the position of the front windshield. Some models have them installed in front of the interior rearview mirror, close to the front windshield. High-end models may also integrate automatic rain sensors here. Automotive headlight configurations: Headlights come with various configurations. Some models support features like adaptive cornering lights and headlight height adjustment. Adaptive cornering lights can change direction according to the steering wheel's turning angle, reducing blind spots during turns. Headlight height adjustment is achieved through sensors installed on the rear suspension, which automatically adjust the headlight height by sensing changes in the vehicle's rear height.
Was this review help?
19
1
Share
JosephineMarie
09/18/25 4:01am
As a Geely Emgrand GS owner with three years of driving experience, I can definitively tell you that the automatic headlight sensor is located at the very top center of the windshield, specifically in that small black box beside or above the interior rearview mirror. The design is quite ingenious - it integrates a light sensor that detects day/night changes to automatically switch the headlights on/off. Common issues like reduced sensitivity may occur if there's a sunshade or dirt blocking that area of the windshield, so regular cleaning to prevent dust buildup is recommended. If you can't locate it yourself, check the vehicle manual or ask a car wash technician for guidance during service. Just don't attempt random disassembly to avoid accidents. The placement is important because it doesn't obstruct driving visibility while enhancing convenience, making nighttime driving safer and more worry-free. Remember to keep that area clean to prevent operational errors.
Was this review help?
3
4
Share
Expand All
DelRebecca
11/01/25 4:26am
From the perspective of experienced automotive professionals, the automatic headlight sensor of the Emgrand GS is typically embedded in the upper central area of the windshield, near the small black dot at the front of the interior ceiling. This small sensor is responsible for detecting ambient light to determine whether the headlights need to be activated. Its placement is chosen to accurately capture external light conditions and prevent misjudgments that could cause delayed lighting. In case of sensor malfunction, don't panic—first check for any obstructions or dirt on the sensor surface. If necessary, gently wipe it with a soft cloth to restore normal operation. The design balances aesthetics and functionality, ensuring it doesn't disrupt the interior appearance. Regular maintenance of this area is recommended to prevent moisture infiltration and potential short-circuit risks in the electrical system.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What is the reason for the clunking sound when reversing a BMW X3?

The reasons for the clunking sound when reversing a BMW X3 are: 1. There is a gap between the steering knuckle and the bearing; 2. The brake pads are damaged; 3. The ball joint or control arm of the chassis is damaged. Taking the 2021 BMW X3 as an example, it is a mid-size SUV with body dimensions of: length 4717mm, width 1891mm, height 1689mm, wheelbase 2864mm, and a body weight of 1860kg. The 2021 BMW X3 has a front suspension of double-joint spring strut front axle and a rear suspension of multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 184PS, maximum torque of 290Nm, maximum power of 135kW, and is paired with an 8-speed automatic manual transmission.
4
3
Share

What is the maintenance reset method for the Mercedes-Benz E300?

The maintenance reset method for the Mercedes-Benz E300 is: 1. Start the vehicle or press the left button on the dashboard twice while the ignition is on, then turn off the engine; 2. Hold the button without releasing it and start the engine; 3. After starting, wait a few seconds until the vehicle emits a prompt sound, then release the button to complete the process. Taking the 2021 Mercedes-Benz E300 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5078mm, width 1860mm, height 1484mm, wheelbase 3079mm, fuel tank capacity 66L, and trunk capacity 486L. The 2021 Mercedes-Benz E300 features multi-link independent suspension both in the front and rear, and is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 184PS, maximum power of 135kW, maximum torque of 280Nm, paired with a 9-speed automatic transmission.
13
3
Share

What are the 4 main components of a chassis?

The chassis consists of four main systems: the transmission system, the running gear system, the steering system, and the braking system. The functions of the chassis are: to support and mount the automobile engine and its various components and assemblies, to form the vehicle body shape, to receive the power from the engine, to enable the vehicle to move, and to maintain normal driving. The maintenance methods for the chassis are: 1. Regularly check the oil condition of important assemblies; 2. Pay attention to the wear of brake pads and clutch plates; 3. Perform wheel alignment regularly; 4. Monitor tire pressure and wear condition; 5. Apply chassis sealing or install chassis protection armor; 6. Reduce driving on bumpy or muddy roads.
15
5
Share

Where to Reduce Points Through Learning?

Points reduction through learning is available on the Traffic Management 12123 platform. Below are relevant details about points reduction through learning: Points Reduction Through Learning: This is a measure for drivers holding a license who have accumulated points due to traffic violations. By participating in online traffic safety education and passing the exam, they can have their points reduced. "Points Reduction Through Learning" is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Introduction: Motor vehicle drivers who participate in road traffic safety laws, regulations, and related knowledge learning organized by traffic management departments of public security authorities and pass the exam, or participate in traffic safety public welfare activities at the place where their motor vehicle driving license was issued and meet relevant requirements, can apply for a reduction of traffic violation points.
2
3
Share

Where is the fuse for the Bora's windshield washer motor located?

The fuse box for the Bora's windshield washer motor is located on the left side of the center console, specifically behind the panel above the driver's footwell. You can then check the label on the back of the fuse box to locate the exact position of the windshield washer motor fuse. When a circuit experiences a fault or abnormality, the current may rise continuously, potentially damaging important or valuable components in the circuit, or even causing the circuit to burn out or start a fire. If a fuse is correctly installed in the circuit, it will melt and cut off the current when the current rises abnormally, thereby protecting the safe operation of the circuit. Precautions for replacing fuses: Before replacing a fuse, turn off the ignition switch and the corresponding electrical device. Always replace the fuse with one of the same rated current as specified on the fuse box cover, and never use a fuse with a higher current rating. If a fuse with the same current load cannot be found, you may use one with a lower rated current instead. If the new fuse blows immediately, it indicates that there may be a fault in the circuit system, and it should be inspected and repaired as soon as possible.
4
0
Share

What is the method for installing a car battery?

Car battery installation method involves parking the car on a flat surface, turning off the engine, and disconnecting the power; using a screwdriver to remove the battery cover; disconnecting the battery cables, ensuring to remove the negative terminal first, followed by the positive terminal, etc. The positive and negative terminals of the battery must not be reversed. Car battery installation method: Loosen the negative terminal nut, open the two fastening buttons of the insulation cover, and you will see the red and black insulation covers on the positive and negative terminals. Flip open the insulation covers to reveal the locking nuts; disconnect the negative terminal, use a wrench or hex socket to loosen the fastening nut of the negative terminal, then gently pry open the fastening block with a flat-head screwdriver, and then pull out the negative terminal; disconnect the positive terminal using the same method; loosen the locking strap, unscrew the nut that secures the battery's locking strap, release the locking strap, and then remove the battery; when installing a new battery, simply follow the reverse steps, but it is important to note that when connecting the positive and negative terminals, the order is "positive first, then negative," which is the opposite of the disassembly sequence, but the principle remains the same—to prevent short-circuit hazards and ensure safety.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.