Where is the anti-theft screw of BMW X1?

2 Answers
AlexanderDella
07/25/25 8:14am
The anti-theft screw of the BMW X1 is located under the floor of the vehicle's trunk, near the tire removal tools. Its anti-theft principle involves machining the outer diameter of the screw into an irregular shape, which requires the use of a dedicated removal tool specific to the wheel to remove it. The BMW X1 is a compact SUV introduced by BMW Brilliance, with dimensions of 4565mm in length, 1821mm in width, and 1620mm in height, and a wheelbase of 2780mm. It is equipped with either a 1.5T L3 or a 2.0T L4 turbocharged engine, with maximum power outputs of 103kw and 141kw respectively, paired with a 7-speed dual-clutch or an 8-speed automatic transmission.
Was this review help?
13
1
Share
OJayden
08/10/25 6:51pm
The anti-theft screws for my previously purchased BMW X1 are located in the trunk toolkit. Lift the trunk floor panel, and you'll find a small pouch containing the anti-theft key and lug wrench, specifically designed to secure the wheels against theft. These are crucial when parking, especially in downtown areas to prevent wheel theft. I recommend checking the tool placement every time you wash the car to avoid rust or loss. If you genuinely can't find them, don't panic—you can contact the 4S dealership to order a new set, though it will cost some money. During routine car maintenance, remind your friends to pay attention to anti-theft screw upkeep—it's both safe and hassle-free.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Can I Use My Own Motorcycle for the Test?

You cannot use your own motorcycle for the test. Motorcycle test regulations: The test provides specialized motorcycles to ensure fairness and impartiality, and personal motorcycles are not allowed. A motorcycle, driven by a gasoline engine and steered by handlebars to control the front wheel, is a two- or three-wheeled vehicle known for its lightweight, agility, and speed, widely used for patrols, passenger and cargo transport, etc. The new regulations indicate that applying for a motorcycle license will gradually implement electronic testing nationwide. This means that, similar to car tests, motorcycles will be equipped with cameras during the test, and the entire process will be evaluated through electronic sensing devices, completely ending manual testing. Basic motorcycle test items: Pole test, hill start and stop, parallel parking, crossing a single-plank bridge, curve driving, right-angle turn, speed-limited passage through a narrow gate, passing continuous obstacles, 100-meter gear shifting, and driving on bumpy roads.
15
5
Share

Which gear is the fastest?

The fastest gear in a car is the 5th gear. Introduction to gear usage techniques: Starting gear control: Do not keep your hand on the gearshift lever for a long time while driving. Use 1st or 2nd gear when starting. Gear shifting techniques: When shifting gears, the driver should coordinate the clutch and throttle properly. Press the clutch pedal all the way down, then release the accelerator pedal, and quickly shift to the corresponding gear. Downshifting under high load: If the vehicle shakes slightly under high load, downshift by one or two gears. Reasons for matching car gears with speed: When the speed matches the gear, the car's performance is at its best, and the thermal efficiency of the fuel is the highest. If the speed does not match the gear, such as high speed with low gear or low speed with high gear, it will not only increase fuel consumption but also cause damage to the engine and transmission, leading to irreversible harm to the vehicle. Therefore, it is essential to maintain the proper match between gear and speed while driving.
10
0
Share

Why Does the Tank 300 Engine Compartment Have a Strong Burning Smell?

Tank 300 engine compartment has a strong burning smell for the following reasons. Reasons for the strong burning smell in the Tank 300 engine compartment: New engine parts breaking in (especially within the first 2000 kilometers). It is common to smell a burning odor, which is normal; Sudden acceleration. Holding the clutch for too long, causing it to partially engage, can also produce a burning smell. Doing this frequently will wear the clutch faster than usual; sudden acceleration while driving. Spinning the tires on the ground can also create a burning smell. Of course, if you frequently spin the tires, they will wear out faster. The engine temperature is too high, indicating a cooling system issue—pay attention to the coolant temperature. Plastic components or wiring may be touching hot engine parts. Oil leaks, where spilled oil evaporates on the hot engine surface, or the engine is too dirty, leading to poor heat dissipation. Solutions: In most cases, a burning smell from the engine is normal and requires no action.
13
2
Share

Is Modifying the Exhaust System Illegal?

Modifying the exhaust system is illegal. Definition of the Exhaust System: The exhaust system of an engine refers to the components that organize the exhaust after the turbine or afterburner. The composition and structural design of the exhaust system depend on the type and purpose of the engine and aircraft. The exhaust system includes components such as the tailpipe, thrust reverser, and muffler. The tailpipe is an essential part of the engine, while other exhaust components are installed based on the specific needs of the engine and aircraft. Functions of the Exhaust System: The exhaust pipe primarily serves to reduce vibration and noise (muffling) and minimize the pollution of harmful gases. During driving, the pressure of exhaust gases leaving the engine is high, resulting in significant noise. The exhaust pipe contains a muffler, which helps reduce noise to some extent. The automotive exhaust system also includes a "three-way catalytic converter," which reduces pollution. This device converts harmful gases such as carbon monoxide, hydrocarbons, and nitrogen oxides emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation-reduction reactions, thereby purifying the exhaust and reducing air pollution.
15
4
Share

What is the engine oil for China VI standard?

China VI standard engine oil is 5w30 semi-synthetic engine oil. Semi-synthetic engine oil: Semi-synthetic oil is one type of automotive engine oil. It is formulated using semi-synthetic base oil, specifically: internationally classified Group III base oil. This lubricant is a product derived from mineral oil through hydro-cracking purification technology, consisting of a 4:6 ratio blend of mineral oil and full synthetic oil. The purity of semi-synthetic oil is very close to that of full synthetic oil, though its cost is slightly higher than mineral oil; it serves as an ideal transitional product between mineral oil and synthetic oil. Full synthetic engine oil: Full synthetic engine oil represents the premium grade among engine oils. It is produced from ethylene or propylene dispersed from natural gas or crude oil gas, which then undergoes polymerization, catalysis, and other complex chemical reactions to form high-molecular lubricating fluids.
14
1
Share

What size wrench is used for motorcycle spark plugs?

Motorcycle spark plug installation and removal require a 17mm wrench. Steps for replacing motorcycle spark plugs: First locate the cylinder head position, find the spark plug cap, and remove it. Before removal, you can use an air gun to clean the surrounding area to prevent debris from falling into the combustion chamber through the installation hole when removing the spark plug. Use the onboard/special tool to unscrew the spark plug counterclockwise. If no dedicated removal tool is available, you can also use a wrench to turn it counterclockwise. Hand-remove the spark plug body and begin inspection and cleaning. Since onboard tools lack magnetic attraction and a fixed base, the spark plug may drop during removal. After removing the spark plug body, install the new spark plug along the original path.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.