Where is the anti-theft screw of Audi A4 located?

1 Answers
McWalter
07/29/25 5:07pm
Audi A4's anti-theft screw is located on the tire, and the tool is under the trunk. Lift the trunk mat to see the cover of the spare tire, and removing it will reveal the screw. The anti-theft screw, also known as a tamper-proof screw, works by having an irregular outer diameter shape, requiring a specialized removal tool that matches the wheel to remove it. The Audi A4 is a B-class sedan manufactured by FAW-Volkswagen, with body dimensions of 4763mm in length, 1826mm in width, and 1426mm in height, and a wheelbase of 2903mm. The design of the Audi A4's door handles emphasizes ergonomic effects and complete functionality, with sensitive pressure points for easy door opening and providing an optimal grip to allow forceful door opening in case of an accident.
Was this review help?
19
2
Share
More Forum Discussions

How many liters of engine oil are needed for Audi A6 2.4 maintenance?

Audi A6 2.4 maintenance requires 6 liters of engine oil. Factors affecting oil consumption: Engine oil naturally has a certain level of consumption, but excessive consumption indicates oil burning issues. Fuel quality, driving conditions, driving habits, maintenance practices, and other factors can exacerbate oil consumption leading to oil burning. Consequences of oil burning: Carbon deposits form in the combustion chamber, causing the piston rings to stick and resulting in poor sealing; sludge forms in the lubrication system, clogging the oil return holes of the oil rings and reducing their oil-scraping performance; wear occurs between the pistons and cylinder walls; valve seals corrode and age, leading to sealing failure.
8
3
Share

What is the ground clearance of the 2019 Honda CR-V?

19 Honda CR-V minimum ground clearance is 137mm. The following is an introduction to the minimum ground clearance: The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as stones and stumps without collision. Extended content: 1. Appearance. The Honda CR-V has a very domineering and stylish exterior design. The polygonal front grille is designed to be very wide, with a multi-horizontal bar mesh for decoration, giving it a high level of recognition. The Honda CR-V has thickened the chrome around the logo, further enhancing the horizontal design effect of the front face. The fog lights are designed horizontally, paired with L-shaped chrome trim for decoration, making it very exquisite and grand. 2. Power. The 1.5T Earth Dreams engine of the 19 CR-V has a maximum horsepower of 193 and a maximum torque of 243N·m, with a combined fuel consumption of 6.6L/100km as per the MIIT. 3. Body dimensions. The Honda CR-V is 4585mm long, 1855mm wide, 1679mm high, with a wheelbase of 2660mm.
16
1
Share

Can Aisin 6AT Run for 1 Million Kilometers?

Aisin 6AT cannot run for 1 million kilometers. Below is an extended introduction to it: Introduction to Aisin 6AT Transmission: Generally, the Sagitar Aisin 6AT transmission has a lifespan of about 200,000 kilometers, but this must be under the premise of standardized driving. The Aisin 6AT uses a transmission with two sets of planetary gears, which can reduce fuel consumption during upshifts and thus expand the lock-up range design, while also adopting advanced structural technology with a fuel-saving valve. Aisin 6AT Transmission Maintenance: It is necessary to regularly check the transmission fluid and replace it in time, with a replacement cycle generally between 40,000 to 60,000 kilometers. Never start the engine in any gear other than N or P, and do not engage R gear while the vehicle is in motion.
10
4
Share

Is 9005 for Low Beam or High Beam?

9005 is generally used for high beam. Here are the specific details about using lights during night driving: 1. Under normal circumstances: When driving at night, only the low beam needs to be turned on, and the turn signal should be used when making a turn. Urban roads are well-lit, so there is no need to use high beam. However, in areas with poor lighting, high beam should be used. 2. When encountering oncoming traffic: If you are using low beam, no action is needed regarding the lights. If high beam was previously on, it should be switched to low beam in advance. Otherwise, the high beam may prevent the oncoming driver from judging the width of your vehicle, potentially causing an accident. After passing the oncoming vehicle, decide whether to switch back to high beam based on road conditions. 3. When driving straight through an intersection: Low beam should be used. When passing through an uncontrolled intersection, slow down and alternate between high and low beams as a signal. 4. When overtaking: Turn on the turn signal in advance, then honk and quickly switch between high and low beams to alert the vehicle ahead. After confirming that the vehicle in front has no intention of changing lanes, proceed with overtaking quickly. Avoid driving side by side with the other vehicle for an extended period. After completing the overtaking maneuver and ensuring sufficient distance from the overtaken vehicle, use the turn signal to move back to the original lane.
11
5
Share

What are the causes of the parking brake system failure in the Audi Q3?

Audi Q3 parking brake system failure may be caused by sensor malfunction or ABS pump failure. Parking brake system failure warning signs: The electronic parking brake light keeps flashing, accompanied by "automatic parking function failure". After parking and restarting, most vehicles no longer display this fault. Causes and related solutions: A switch bus socket is not properly seated. The parking brake sensor may have mud/water contamination during rainy days or metal shavings during the new car break-in period, leading to inaccurate detection. Most 4S shops suggest this is an occasional fault code that can be resolved by clearing it for normal operation.
5
1
Share

What is the reason for the Civic stalling after stepping on the brakes after turbo modification?

The reason for the Civic stalling after stepping on the brakes after turbo modification is a dirty throttle body. Introduction to the throttle body: It is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to perform work. It connects to the air filter at the top and the engine block at the bottom, and is known as the throat of the car engine. Introduction to the Honda Civic: The CIVIC is a legendary model from Honda, born in 1972. Over the past 50 years, it has undergone ten generations of innovation and evolution, earning the recognition and trust of 27 million users worldwide. From its inception, the CIVIC has represented Honda's spirit of continuous challenge and breakthrough, making it Honda's most core and iconic model.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.