···
Log in / Register

Where is the Altima's Cabin Air Filter Located?

4 Answers
SanJohnny
07/29/25 1:26pm

The Nissan Altima's cabin air filter is located under the glove box on the left foot position of the front passenger side. More information about the Altima is as follows: 1. The Altima measures 4901mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2825mm. It has a top speed of 197 km/h, a fuel tank capacity of 61.3L, and a maximum horsepower of 156 hp. The drivetrain is front-engine, front-wheel drive. 2. The Altima is a flagship mid-to-high-end luxury sedan under the NISSAN brand. 3. The 2021 Altima is available with either a 2.0L naturally aspirated engine or a 2.0T turbocharged engine, paired with the new intelligent XTRONIC-CVT continuously variable transmission.

Was this review help?
14
2
Share
VonRuth
08/14/25 3:56am

I've been driving the Teana for several years now, and I remember the filter location clearly. It's hidden inside the glove compartment in front of the passenger seat, so you can replace it yourself without going to a repair shop. Every time I open the glove box, I see small clips on both sides—just press them gently and the whole compartment can be lowered, revealing a small square box layer where the filter housing is. Simply pull out the old filter inside the box and replace it with a new one. The location is quite thoughtfully designed. I usually recommend changing it at least once a year, especially during seasonal transitions, to keep the air inside the car fresher and reduce the risk of dust allergies. Remember to buy genuine filters and ensure the model is correct and installed in the right direction.

Was this review help?
16
4
Share
Expand All
VanMarley
10/10/25 3:02am

From a practical operation perspective, the air conditioning filter of the Teana is located in the area behind and below the glove box. Owners can easily replace it themselves. Open the glove box on the passenger side, locate the release buttons on both inner sides, press them, and the box will drop down, revealing the filter cover. Remove the cover, take out the old filter, and replace it with a new one, ensuring the arrow direction is aligned. The position is hidden but easily accessible, with a reasonable design to prevent dust accumulation from affecting air conditioning performance and respiratory health. It is recommended to check every 10,000-20,000 kilometers or before the humid season to ensure efficient filtration.

Was this review help?
13
0
Share
Expand All
LawsonDella
11/23/25 4:13am

The filter is located inside the glove compartment on the passenger side, making it easily replaceable. The DIY steps are simple: open the glove box, press the clips on both sides to lower it, locate the filter housing, pull out the old one, and insert the new one. This design is hassle-free, requiring no tools and can be done in just a few minutes. Remember to replace it regularly, such as once a year, to maintain smooth airflow from the AC and reduce odors inside the car. Regular checks while driving can prevent filter clogging and enhance comfort.

Was this review help?
1
1
Share
Expand All
More Forum Discussions

Why Are SUV Wheel Arches Made of Plastic?

To reduce production costs and facilitate maintenance and replacement. Introduction to Wheel Arches: Wheel arches, also known as fender flares, refer to the chrome-plated bright strips along the upper edge of the tires, which are the semicircular components protruding from the fenders above the car tires. Functions of Wheel Arches: The primary functions of wheel arches are for decoration and meeting the personalized needs of drivers. From an aerodynamic perspective, wheel arches also help reduce the drag coefficient to some extent. Additionally, for vehicles in colors like black or red (non-white), wheel arches enhance visual appeal, making the car body appear lower. They also provide some protection against scratches.
4
5
Share

Will the turn signal not work if the flasher is broken?

Yes, if the flasher is broken, the turn signal will not work. Here are the relevant details: 1. Flasher: The flasher is a flashing device used to indicate changes in the direction of the vehicle. It features a new circuit design, consisting of a low-voltage switch circuit, high-voltage switch circuit, pulse generation circuit, dual-transistor amplification output circuit, and two sets of light indicator circuits. 2. Fault causes: There are many reasons why a car's turn signal may not work, including open circuits, flasher relay failure, excessive contact gap, and other factors. For mechanically controlled vehicles, the issue is usually a faulty flasher, and replacing it will fix the problem. For computer-controlled vehicles, it is necessary to check the fault codes and system programming.
12
4
Share

Can Car Glass Breakage Be Covered by Insurance?

Car glass breakage can be covered by insurance. Here are the relevant details: 1. Commercial Insurance: Glass insurance, which is a type of commercial insurance where the insurance company is responsible for compensating the insured vehicle for losses incurred due to glass breakage during use. Glass breakage refers to damage to the windshield and window glass of the insured vehicle (excluding headlights and mirror glass). Glass insurance is a separate policy, and if there is no accident scene, the insurance company will process it as a no-scene case but will not provide full compensation. 2. Precautions: Do not report the incident to the insurance company alone, as improper reporting may result in the insurance company not providing 100% full compensation or even denying the claim. Generally, staff members are familiar with the procedures and techniques for reporting car glass breakage to the insurance company and can assist in ensuring full compensation for the loss of car glass.
12
0
Share

Is it normal for car wipers to be blurry for a few seconds and then clear up?

It is normal for car wipers to be blurry for a few seconds and then clear up. Here is the relevant information: 1. Function: Wipers, also known as windshield wipers or windscreen wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, almost all cars are equipped with wipers. Rear windows of hatchbacks and SUVs also have wipers. Besides cars, other means of transportation such as trains and trams are also equipped with wipers. Some engineering machinery, such as cranes, also have wipers. 2. Precautions: To ensure driving safety, wiper maintenance should not be neglected. Properly cleaning the wipers, especially sand particles, which are the main cause of wiper wear, is essential. Neglecting regular cleaning can accelerate wiper wear. Avoid prolonged exposure to high temperatures: The intense summer heat can affect the rubber material of the wipers, leading to deformation or loss of elasticity over time.
6
4
Share

Should the Levin turn on the auto lights or the width lights during the day?

The Levin should turn on the auto lights during the day, where 'auto' refers to the car's automatic headlights. Below is a detailed introduction to the Levin: 1. Body dimensions: The vehicle's body length is 4640 mm, width is 1780 mm, height is 1435 mm, wheelbase is 2700 mm, front track is 1531 mm, rear track is 1535 mm. It is a four-door, five-seater sedan with a fuel tank capacity of 50 liters, positioned as a compact car. 2. Manufacturer: The manufacturer is GAC Toyota. GAC Toyota Motor Co., Ltd. was established on September 1, 2004, with its headquarters located in Guangzhou, China. It is a Sino-Japanese joint venture jointly invested by China's GAC Group Co., Ltd. and Japan's Toyota Motor Corporation, with a cooperation period of 30 years.
2
3
Share

How to Avoid Panic When Shifting Gears?

Shifting gears can be done smoothly by remembering the mantra: 'Right first, then left, act immediately, left up and right down like a seesaw'. Here's a detailed explanation of the mantra: 1. Right first, then left: Whether upshifting or downshifting, always base it on speed, as the throttle and brake control speed. Specifically, to downshift, first accelerate by pressing the throttle; to upshift, first decelerate by pressing the brake. Once acceleration or deceleration is complete, especially when the car body shakes, quickly press the clutch with your left foot—firmly. Remember, if the car body shakes, it's a sign of insufficient power; downshift quickly to avoid stalling. 2. Act immediately: While pressing the clutch with your left foot, use your right hand to shift gears. Importantly, never look down at the gear stick. At this moment, your focus should be on the road ahead. With only one hand on the steering wheel, grip it firmly to maintain control, while shifting gears swiftly with your right hand. 3. Left up and right down like a seesaw: This refers to clutch control. Release the clutch slowly until it reaches the semi-engaged position, then gently press the throttle with your right foot. Avoid pressing the throttle too hard. The motion should be coordinated, like stepping on a seesaw—one foot up, the other down.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.