Where is the air recirculation button on the Nissan Qashqai?

1 Answers
Barbara
07/30/25 3:14am
The following describes the location of the air recirculation buttons on the Nissan Qashqai: 1. Recirculation: The recirculation button is located on the left side of the air conditioning control panel. When activated, the air inside the vehicle continuously recirculates. 2. Fresh air intake: The fresh air intake button is located on the right side of the air conditioning control panel. When activated, outside air is exchanged with the air inside the vehicle. The following describes the location of other air conditioning buttons on the Nissan Qashqai: 1. Adjusting the air temperature: There are adjustment knobs on both sides of the screen. Turning them left or right increases or decreases the temperature by 0.5°C. 2. Dual-zone control: The "DUAL" button next to the A/C switch is the button for synchronizing the temperature zones.
Was this review help?
9
3
Share
More Forum Discussions

Can You Inflate Car Tires with a Bicycle Pump?

It is possible to inflate car tires with a bicycle pump, but it is quite challenging in practice. Using a bicycle pump to inflate car tires is time-consuming and labor-intensive. It is recommended that car owners, if possible, visit an auto repair shop or use an electric air pump to inflate their car tires. A car air pump, also known as an inflator or portable air compressor, operates by the rotation of its internal motor. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. Car tires are one of the essential components of a vehicle, directly contacting the road surface and working together with the car suspension to absorb shocks during driving, ensuring good ride comfort and smooth driving. Tire tread patterns can be classified into rib patterns, transverse patterns, mixed patterns, and off-road patterns.
15
4
Share

Which country is the Excelle from?

Excelle is from the United States. It is a model under SAIC-GM Buick, with body dimensions of 4419mm in length, 1814mm in width, and 1487mm in height, and a wheelbase of 2640mm. In terms of appearance, the Excelle features a more prominent sense of fashion, with very powerful body lines. The front face adopts a large-area air intake grille, which is also decorated with chrome trim strips. From the side, the waistline design of the Excelle is very smooth, visually elongating the car's body length. The rear of the Excelle adopts a brand-new design, with a full and rounded rear appearance. The taillights look relatively simple and also feature a smoked treatment, providing high visibility when illuminated at night.
15
2
Share

When to Straighten the Wheel When Exiting a Curve?

Straighten the wheel when the rearview mirror passes the curve corner. Below are some related tips for driving through curves: 1. Avoid stopping: When entering the curve, pay attention to the position of the front of the car. Try to keep the outer front tire close to the right edge of the curve while driving. Use the rearview mirror to judge the distance from the edge line to avoid crossing it. Proceed in first gear with the clutch partially engaged, and the speed can be slow, but stopping is not allowed. During the movement of the vehicle, observe the left and right rearview mirrors to control the distance from the edge line. 2. Pay attention to the position of the front of the car: When exiting the curve driving test area, align the front of the car with the exit, straighten the wheel, and continue driving to complete the curve driving.
18
3
Share

Why does the car air conditioner not cool when the car is not running?

Reasons why the car air conditioner does not cool when the car is not running: 1. Insufficient battery voltage: The car air conditioner requires electricity. If the voltage is insufficient, it will not cool. When accelerating, the engine generates electricity to provide higher voltage to the battery, allowing the car air conditioner to cool normally. 2. Compressor operation status: If the compressor belt slips, it will affect power transmission, resulting in insufficient pressure at low speeds; internal components of the compressor may be damaged, causing noise, and internal wear may prevent effective compression; if the compressor clutch slips, it will also lead to insufficient compression pressure. 3. Condenser and fan status: If the condenser radiator is severely blocked, the condenser's efficiency will decrease at low speeds; check if the condenser fan is faulty—if there is noise or poor motor operation, it will affect insufficient airflow at low speeds. 4. Refrigerant level inspection: Observe the refrigerant in the inspection window for excessive bubbles; check the high and low-pressure pipelines and connections for leaks—repair or replace if necessary.
16
3
Share

Where is the car thermometer sensor located?

Automotive temperature sensors are installed at the air intake grille of the front bumper. This sensor is a component of the automatic air conditioning system, primarily responsible for providing the ECU with external temperature signals. The ECU compares this signal with the interior temperature signal to determine the cabin temperature, meeting the needs of the occupants. Additional information: 1. How automotive sensors work: They convert various operational data such as light, electricity, temperature, pressure, and time into electrical signals, which are then input into the vehicle's computer system. The computer uses pre-stored programs to perform calculations and analysis, thereby determining the vehicle's operating status. 2. Types of automotive sensors: Based on their structural design and the principle of air intake measurement, they can be categorized into four types: vane-type air flow sensors (MAF), Karman vortex air flow sensors (MAF), hot-wire air flow sensors (MAF), and hot-film air flow sensors (MAF). Currently, the most commonly used are the hot-wire and hot-film types.
1
5
Share

What's the reason for no response when starting the Transit?

The reasons for no response when starting the Ford Transit are as follows: 1. Long-term parking: The usage time of the car battery is the main cause of power loss. Typically, the lifespan of a car battery is two to three years. If it exceeds this period, the car is prone to power loss after just two to three days of parking, resulting in weak starting. 2. Forgetting to turn off lights and onboard electrical devices: If you forget to turn off the interior lights when parking and turning off the engine, the battery may be depleted after a night's consumption, leading to weak starting. 3. Forgetting to turn off the air conditioning before shutting down: Not turning off the air conditioning before shutting down the engine will cause the air conditioning system to automatically start working when the ignition switch is turned on, resulting in an immediate high power load on the vehicle. Over time, this will cause damage to the battery. 4. Insufficient fuel pressure. 5. Poor performance of the fuel pump, spark plugs, or distributor.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.