Where is the air intake on the BMW 3 Series?

2 Answers
DeJeffrey
07/29/25 4:10am
The air intake of the BMW 3 Series is located approximately 50mm below the BMW emblem on the hood, behind the corner of the right headlight, and can be seen through the grille. Below is some extended information about the BMW 3 Series: 1. In terms of exterior configuration, the long-wheelbase models will come standard with features such as a panoramic sunroof and LED headlights (including adaptive cornering function), while the launch edition offers a luxury design package. The other three configurations provide M Sport packages, M aerodynamic components, etc. 2. For the interior, the new BMW 3 Series long-wheelbase version largely retains the main design of the overseas model. For example, it features a new floating LCD screen paired with a redesigned electronic gear lever and an M-branded three-spoke multifunction steering wheel. In terms of power, the new BMW 3 Series long-wheelbase version is equipped with the latest B-series 2.0T engine (model B48B20B), which has the same 184 horsepower output as the current 320i/Li, but the tail badge has been changed to 325Li.
Was this review help?
13
4
Share
AngelaFitz
08/12/25 7:55am
I've been working on cars for twenty years, and the air intake for the BMW 3 Series is usually located behind the front grille. When you pop the hood, you can see the metal grille—it's quite cleverly designed, positioned forward to draw in more fresh air for the engine. If you want to inspect it yourself, make sure to turn off the engine first to avoid burns, then gently pry open the protective cover with a screwdriver. If you often drive in rural areas, the intake can easily get clogged with leaves or insect debris. If not cleaned in time, the engine will feel sluggish and lose power. My personal recommendation is to clean it every quarter—just use some compressed air to blow it out. Avoid using water, as it can damage the sensors. If your car is a newer model, the location might be slightly adjusted, but it’s generally in the same area. Maintaining the air intake not only saves fuel but also extends the engine’s lifespan.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

What is the purpose of the line on the rearview mirror?

The function of the line on the rearview mirror is: the glass on the outer side of the line changes its curvature, resulting in two different curvatures on the same reflective surface of the rearview mirror. This design provides a wider field of view for the rearview mirror, reducing blind spots while driving and lowering the likelihood of traffic accidents. Additional information: 1. If there is such a line on the rearview mirror, it is called a dual-curvature rearview mirror, meaning the inner and outer sections of the mirror have different curvatures. 2. This line is vertically positioned, located one-third of the way from the side closest to the vehicle body. 3. If there is no such line, it is a standard rearview mirror. However, it can be upgraded to a "dual-curvature rearview mirror" by adding a "convex lens" to the mirror. This modification can also expand the rearward field of view, which is beneficial for reversing or observing traffic conditions behind the vehicle.
19
3
Share

How to Determine if the Car is in the Middle of the Road?

Determining if the car is in the middle of the road can be done using the following methods: 1. Using the driver's own body as a reference: The position of the left leg corresponds to the trajectory of the left front wheel, while the position aligned with the right leg is the centerline of the car body. Therefore, ensuring that the right leg frequently aligns with the centerline of the road while driving will keep the car centered on the road. 2. Using the lower edge of the car's front window as a reference: (1) The trajectory of the left wheel aligns with a point 10-15 cm inward from the left lower edge of the front window. (2) The trajectory of the right wheel aligns with the center position of the front window. Additional Tips: Drive the car onto the road and use the left edge, center, and right edge of the road as references. Park the car at each of these positions and note where the left edge, center, and right edge of the road fall on the lower edge of the front window. Memorize these positions. Due to differences in car models and driver heights, the exact positions may vary.
5
2
Share

How many kilometers is the break-in period for the Audi A6?

Audi A6 break-in period is 5000 kilometers, and the period before the first maintenance is considered the break-in period. Here is the speed introduction for the Audi A6 break-in period: 1. The first 500 kilometers is the initial break-in: At this stage, the speed should not be too fast, it should be below 70-80 kilometers per hour, and the engine speed should not exceed 2200 rpm. 2. 500-1000 kilometers is the mid-term break-in: The maximum speed can be appropriately increased to 90-100 kilometers per hour, with the engine speed still below 2500 rpm. Appropriately increasing the speed will not affect the engine but can promote the break-in process and check for any abnormalities during acceleration. 3. 1000-1500 kilometers is the late break-in: The speed can be increased to below 120 kilometers per hour. Since the break-in is a gradual process, it must be done step by step. The engine speed should not exceed 3000 rpm.
8
2
Share

How to Check Driver's License Number?

Traffic Management Bureau's violation inquiry provides functions for querying illegal vehicles and driver violations. The system will list all records of the user. The driver's license inquiry system collects and organizes authoritative nationwide motor vehicle driver's license number inquiries, as well as driver's license authenticity verification and driver point inquiries. The official driver's license platform is a professional verification platform for traffic violation inquiries, driver's licenses, motor vehicles, ID cards, and illegal information.
14
1
Share

How to check the reason for failing the third driving test?

You can check the reason for failing the third driving test at the examination hall. The third driving test mainly assesses road safety driving and safety awareness, and there are many possible reasons for failure. During the third driving test, wear thin-soled sports shoes, pay attention to traffic signals, yield to vehicles, pedestrians, and non-motorized vehicles, and frequently check the rearview mirrors.
15
2
Share

What are the methods and techniques for right-side reverse parking?

Methods and techniques for right-side reverse parking are as follows: 1. Align the mirror and turn the steering wheel fully to the right: When starting to reverse into the parking space, observe the position relationship between the left rearview mirror and the parking line. First, turn the steering wheel half a turn to the right and then start moving. When the left rearview mirror covers the parking line, turn the steering wheel fully to the right. 2. Observe the corner and adjust the distance: While reversing with the steering wheel fully turned to the right, look at the right rearview mirror. Keep the distance between the car body and the right front corner of the parking space at 30 centimeters. If the distance is too narrow, adjust the steering wheel accordingly. The standard width of the parking line is 15 centimeters, so in the rearview mirror, it should appear as approximately two parking line widths. 3. Straighten the wheels when parallel: Once half of the car body has entered the parking space, observe the relationship between the car body and the side lines through the left and right rearview mirrors. When the car body is parallel to the side lines, straighten the steering wheel. 4. Stop immediately when the mirror aligns with the line: After adjusting the car body position, observe the relationship between the left rearview mirror and the side line. When the left rearview mirror covers the side line, immediately press the clutch to stop.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.