···
Log in / Register

Where is the air intake of the Song Max located?

4 Answers
Gael
09/06/25 5:25am
The air intake of the Song Max is located below the front compartment drain trough. Main functions of the car air intake: To deliver clean, dry, sufficient, and stable air to the engine to meet its requirements, while preventing impurities in the air and large particles of dust from entering the engine combustion chamber, which could cause abnormal engine wear. Another important function of the intake system is to reduce noise and control the intake volume. Noise not only affects the vehicle but also impacts the interior noise level, significantly influencing ride comfort. Impact of air intake quality: The design quality of the intake system directly affects the engine's power and noise performance, which is related to the overall ride comfort of the vehicle. Properly designing muffler components can reduce subsystem noise and improve the vehicle's NVH performance.
Was this review help?
8
2
Share
Avery
09/18/25 5:14am
I've been driving the Song MAX for several years and know it quite well. The air intake is usually installed behind the front grille of the vehicle, specifically in the lower part of the grille, near the edge of the engine compartment. When looking at the front of the car, the grille is the black strip or mesh part where air is drawn in to supply the engine for combustion. If the air intake gets blocked, the engine may struggle or lack acceleration. Last time I encountered a severe dust buildup, it was after a rainy day when mud clogged the opening. It's something you can clean yourself—just use a soft brush to gently remove debris or an air gun to blow it out. For long-term maintenance, it's important to regularly check the air filter as it's connected here. If it's too dirty, the filtering efficiency drops and fuel consumption increases. When parking, avoid areas with high dust to keep the air intake clear and functioning properly.
Was this review help?
14
1
Share
Expand All
Thompson
11/01/25 5:41am
I just got my Song MAX not long ago, and a friend curiously asked where the air intake is. I pointed to the front grille and explained: It's right there in the grille area, positioned quite low, just above the front bumper. From the outside, it looks like a small slit. The design is quite discreet—easy to miss if you don’t look closely—but it’s responsible for channeling air into the engine, so it’s essential. During daily drives, you need to watch out for debris, like autumn leaves or bugs clogging it. I’ve made it a habit to check the grille area after parking to prevent any issues. For my commute, if the roads are dusty, I rinse around the air intake during car washes and wipe it down with a damp cloth. Simple and effective for extending its lifespan.
Was this review help?
17
2
Share
Expand All
FelicityDella
12/15/25 5:49am
As someone who has worked on this type of vehicle, the Song MAX's air intake is located at the lower end of the front grille, generally near the front of the radiator. To be more specific, from the front bumper's perspective, it's situated slightly lower behind the center grille, allowing air to flow smoothly. Checking it is straightforward—just pop the hood and take a quick glance. Regular cleaning is essential to prevent blockages; a dirty air filter not only affects performance but may also trigger a fault light. Replacing it yourself takes just about ten minutes.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

Motorcycle Gear Shifting Tips Mnemonic?

Motorcycle gear shifting tips mnemonic is as follows: 1. Starting: After starting the engine, it needs to warm up for 3-5 minutes before you can start moving. Engine warm-up is a task that should not be overlooked, especially when the surrounding temperature is low, it becomes even more important, but you should not rev the throttle to speed up the warm-up. An engine that is not sufficiently warmed up will increase wear on components such as the cylinder, piston rings, and rocker arms during operation. 2. Before starting: You should first observe the surrounding situation and give a signal. The key to starting is the coordination between the throttle and the clutch. Hold the clutch lever, engage a low gear, gradually release the clutch lever with your left hand while slowly increasing the throttle with your right hand. If the engine tends to stall, quickly add some throttle; if the engine speed is high, reduce the throttle.
13
3
Share

What to Do If Your Car Gets Scratched While Parked on the Roadside?

When most car owners purchase commercial auto insurance, they typically opt for coverage such as collision insurance, third-party liability insurance, and no-deductible coverage, which can be considered the standard package for car owners. In the event of your beloved car being scratched without identifying the responsible party, the car owner can call the insurance company to file a claim. In such cases, the insurance company will reimburse the expenses through the collision insurance. However, the insurance will only cover 70% of the damages, leaving the remaining 30% to be resolved by the car owner. Since parking fees are collected, there is an obligation to assist the car owner in retrieving surveillance footage to locate the responsible party. If the responsible party cannot be found, the incurred losses can legally be claimed for compensation.
11
3
Share

How many kilometers can a car run without engine oil?

Under the conditions of 70~90km/h, it can safely travel up to 120km at most. The following are the specific details: 1. Case: While starting the car engine, drain all the engine oil inside the car, and then use a hair dryer to blow away the residual oil on the engine and oil circuit. After adding Mo'an metal friction reduction and repair agent, the car without oil lubrication safely traveled 120km under the condition of 70~90km/h. Throughout the journey, the vehicle had no abnormal noise, and the engine worked normally. 2. Engine oil: Engine oil refers to the lubricating oil specially used in internal combustion engines. In addition to lubrication, it also has functions such as cleaning, rust prevention, and cooling. Although a car without engine oil can run, exceeding a certain distance will increase the wear and tear of the car and may also cause traffic accidents. Therefore, regular oil changes are very important for cars.
14
0
Share

How to Adjust the Clock in Honda City?

There are 3 methods to adjust the clock in Honda City: 1. Press the function button to select time setting; 2. Use the knob to select the time; 3. Press the middle SET/SELECT button to confirm the time. Below are some related information about the City: 1. Powertrain: The overseas version of City adopts the new EarthDreams series engines: the 1.3L version has a maximum power of 73kW, while the 1.5L version delivers 96kW. The transmission system offers two options: 5-speed manual and CVT. Additionally, the overseas version is also equipped with a 1.5L DOHC i-DTEC diesel engine. 2. Exterior design: The front fascia design is quite similar to that of the Fit. 3. Body dimensions: The new City has increased in size with length/width/height measuring 4440/1695/1495mm respectively, and a wheelbase of 2600mm.
10
2
Share

What to Do If the Baojun 310 Air Conditioning Is Not Cooling?

Baojun 310 air conditioning not cooling measures introduction: If the vehicle's air conditioning cooling effect is poor, the main considerations are insufficient refrigerant or leaks in the refrigerant lines. The conventional approach is to replace the air conditioning filter and add some refrigerant to test. Below are the reasons why the Baojun 310 air conditioning may not be cooling: 1. Expansion valve damage: This prevents the formation of high pressure in the system before the expansion valve, and the high-pressure refrigerant cannot reach the required 150Kpa pressure. As a result, the evaporator behind the expansion valve fails to cool, leading to poor air conditioning performance. 2. Internal wear of the air conditioning compressor: This causes the pressure between the air conditioning compressor and the expansion valve to fail to reach 150Kpa to 200Kpa, preventing normal circulation of the refrigerant in the system and resulting in poor cooling.
18
5
Share

Can motorcycle drum brakes be replaced with disc brakes?

Motorcycle drum brakes can be replaced with disc brakes. If converting the front wheel to disc brakes, it requires replacing the rim, shock absorbers, and adding a complete disc brake system. For rear wheel conversion, modifications include the rim, rear swingarm, brake caliper, etc. Generally, front wheel conversion is relatively easier, while rear wheel modification is more challenging. Additional information: 1. Principle of disc brakes: The working principle of a disc brake system involves installing a disc that rotates synchronously with the wheel on the hub, and mounting calipers on the front fork and frame. The brake pads inside the calipers clamp the disc to achieve braking. 2. Characteristics of disc brakes: (1) Disc brakes have better heat dissipation than drum brakes, reducing the likelihood of brake fade and failure during continuous braking. (2) The size change of the brake disc after heating does not increase the travel of the brake pedal. (3) Disc brakes do not have the self-servo effect of drum brakes, resulting in more balanced braking force between the left and right wheels.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.