Where is the air intake of the Baojun 510 located?

Is a CVT Transmission Manual or Automatic?

CVT transmission belongs to the automatic transmission category, and it is also a continuously variable transmission. Continuously variable transmission is one type of automatic transmission, which refers to a transmission system that can continuously obtain any transmission ratio within the range. Through continuously variable transmission, the optimal matching between the transmission system and the engine operating conditions can be achieved. The advantages of CVT transmission include the following 4 points: 1. High fuel economy: CVT can achieve continuously variable transmission within the range, thereby obtaining the optimal matching between the transmission system and the engine operating conditions, improving the overall fuel economy of the vehicle; 2. Good power performance: Due to the continuously variable transmission characteristics of CVT, it can obtain the maximum transmission ratio of reserve power, so the power performance of CVT is better than that of mechanical transmission (MT) and automatic transmission (AT); 3. Low emissions: The wide working range of CVT speed ratio can make the engine work under optimal conditions, thereby improving the combustion process and reducing exhaust emissions; 4. Low cost: The CVT system has a simple structure and fewer parts than AT. Once automobile manufacturers start mass production, the cost of CVT will be lower than that of AT.

17

5

Share

How to Drive Straight When Learning to Drive?

Here are the techniques for driving a car straight: 1. Look ahead: The first thing to learn about driving straight is to look ahead, preferably at a point about 100 meters in front. Many beginners struggle with this because they tend to focus on their own driving actions inside the car. 2. Pay attention to gear coordination: Before driving straight after a turn, try to stay in 3rd gear and apply slight brake pressure while turning. Otherwise, if you downshift to turn and then immediately need to upshift for straight driving, you may become flustered and fail to align the car properly. 3. Accelerate to the required speed in advance: Factors such as incorrect wheel alignment, uneven tire wear, or uneven force applied to the steering wheel can cause the car to drift during acceleration or deceleration. The correct approach is to accelerate to the required speed before entering the straight driving assessment area and then maintain a steady speed. 4. Make fine adjustments: The key to fine adjustments is not to let the force from your shoulders and elbows transfer to the steering wheel, as even slight tremors can be amplified. The correct method is to relax and hold the wheel steadily. Fine adjustments must be made early; as soon as you notice a slight misalignment between the car's position and the lane markings, you should start adjusting immediately.

13

3

Share

Does the illumination distance of motor vehicle lights at night change from near to far?

Distance changing from near to far occurs when transitioning from a curve to a straight section. The methods for judging road conditions and terrain while driving with lights at night are as follows: 1. Method one: If you notice that the illumination distance of your car's headlights changes from far to near while driving, the road ahead may be entering a curve with a mountain or barrier on one side, reaching the low point of a slope, or approaching or entering an uphill section. 2. Method two: If you notice that the illumination distance of your headlights changes from near to far while driving, the road ahead may be transitioning from a curve to a straight section, entering a downhill slope, changing from a gentle downhill to a steep downhill, or transitioning from a downhill slope to level ground. 3. Method three: If you notice that the headlight illumination leaves the road surface while driving, the road ahead may have a sharp curve, a large pothole, or be reaching the top of a slope. 4. Method four: When the illumination shifts from the center of the road to the side, the road ahead may have a regular curve or a series of curves. In the case of a series of curves, the illumination will shift from one side of the road to the other accordingly.

3

1

Share

Why Can't the One-Button Start Ignite the Engine?

Reasons and solutions for the one-button start failing to ignite the engine are as follows: 1. The steering wheel is locked, preventing ignition. If the steering wheel is not straightened when parking and remains at a slightly larger angle, it will automatically lock as an anti-theft measure. In this case, the key may not turn, causing ignition failure. Solution: Apply force to turn the steering wheel while simultaneously turning the key to unlock the steering wheel, then attempt to start the engine. 2. The smart key for the one-button start may have a low battery. Even if the key is inside the car, the dashboard may display 'key matching error' due to the weak signal emitted by the low-battery smart key, which the start system cannot detect. Solution: Place the smart key directly on the start button and then press the button to start. If the remote key has a low battery or fails to match correctly for other reasons, insert the key into the emergency backup key slot and press the start button to ignite the engine. 3. For new cars, the brake pedal must be pressed before using the one-button start. Pressing the start button without depressing the brake only activates the vehicle's electrical system but does not start the engine. Solution: Press the brake pedal before using the one-button start.

9

3

Share

What is the horsepower of a 4110 diesel engine?

4110 diesel engines vary in horsepower depending on the brand. Most naturally aspirated 4110 diesel engines have around 90 horsepower, while turbocharged 4110 diesel engines typically deliver around 130 horsepower. Turbocharging can enhance both the power and efficiency of diesel engines. Turbocharging technology has been used in both gasoline and diesel engines for a long time. It increases the engine's air intake, thereby boosting its power. A turbocharged engine is equipped with a turbocharger, which consists of two main components: a compression turbine and an exhaust turbine.

3

1

Share

Why is the hood so hot?

Reasons why the hood gets very hot: 1. The engine temperature rises rapidly just seconds after starting: Because the engine needs to reach a certain temperature to perform optimally. 2. Combustion of the air-fuel mixture in the cylinders: Rapid burning and expansion after ignition to drive piston movement generates enormous heat. 3. Wind generated by vehicle speed and the fan blow radiator heat into the engine compartment: Since the hood is metal, it heats up quickly. 4. Heat from engine operation and the radiator is dissipated to the hood: As long as the temperature gauge on the dashboard does not indicate overheating, there is no problem.

17

1

Share

Where is the air intake of the Baojun 510 located?

Is a CVT Transmission Manual or Automatic?

How to Drive Straight When Learning to Drive?

Does the illumination distance of motor vehicle lights at night change from near to far?

Why Can't the One-Button Start Ignite the Engine?

What is the horsepower of a 4110 diesel engine?

Why is the hood so hot?

Should a new car's scratches be repaired immediately?

What are the three photo standards for determining a red light violation?

What does it mean when the vehicle jerks during startup?

Can You Transfer from One Driving School to Another?