Where is the air filter of Venucia T70 located?

2 Answers
LaMiles
07/24/25 5:46pm
The air filter of Venucia T70 is located on the left side of the front passenger's leg area. The function of the air filter is to filter dust particles and other impurities from the air, providing clean air for the car's air conditioning system. Air filters are generally divided into two types: standard air filters and activated carbon series air filters. The replacement interval for air filters is typically every 8,000 to 10,000 kilometers of driving, but this can also be determined based on the external driving environment. If the environment has significant humidity variations, year-round dry climate, or heavy sandstorms, the air filter should be replaced earlier. The Venucia T70 is the first SUV model developed by the Dongfeng Venucia brand, with body dimensions of 4542mm in length, 1786mm in width, and 1642mm in height.
Was this review help?
12
0
Share
VanDavid
08/11/25 9:52am
I've been driving the Venucia T70 for five years, and I'm very familiar with the location of the cabin air filter. It's hidden behind the glove compartment in front of the passenger seat. Typically, you need to open the glove compartment first, then press firmly on the clips on both sides to release the cover. After removing the cover, you'll see a square box containing the cabin air filter. Many cars have a similar design. I've replaced it several times myself, and the tools required are simple—just a small screwdriver or even using your hands to pry it open. Regular replacement, such as every six months or 10,000 kilometers, can prevent odors and bacterial growth in the air vents, improving the air quality inside the car. As an experienced owner, I find this task quite easy, saving the hassle and cost of visiting a repair shop while ensuring the health of my family, especially during pollen season. The location is discreet but well-designed, without interfering with other components.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

What types of vehicles are suitable for a C2 driver's license?

C2 driver's license is suitable for automatic transmission vehicles with fewer than 9 seats and a vehicle length not exceeding 6 meters, including small and mini automatic transmission passenger vehicles, as well as light and mini automatic transmission cargo vehicles. The C2 driver's license examination process consists of the theoretical test (Subject 1), the field test (Subject 2), and the road test (Subject 3). The C2 driver's license Subject 2 examination includes test items such as single-plank bridge, hill start, parallel parking, reverse parking, and curve driving, with the test vehicle being an automatic transmission car. The age requirement for obtaining a C2 driver's license is 18 to 70 years old, the height requirement is above 155 centimeters, and the vision requirement is that the naked eye vision or corrected vision of both eyes reaches 5.0 or above on the logarithmic visual acuity chart.
14
1
Share

Do You Need to Press the Brake When Shifting into Reverse Gear in a Manual Transmission?

No. When shifting gears, the clutch and throttle must be well-coordinated. Press the clutch pedal all the way down, then release the throttle pedal, and quickly shift into the corresponding gear. Master the timing of gear shifting: When driving a manual transmission car, the most important thing is to master the timing of gear shifting. Shift gears when the engine speed is around 2000 RPM. First reduce the throttle and then press the clutch, so the clutch won't be forced to disengage, and then shift gears. Gear shifting sequence: The gear shifting sequence must be first gear → second gear → third gear → fourth gear → fifth gear. Skipping gears is not recommended. The downshifting sequence depends on the vehicle speed. Based on your car's condition, generally downshift when the engine speed is below around 1500 RPM.
19
4
Share

Where is the drainage hole of the Bora car door located?

The drainage holes of the Bora car door are located at the lower part of the door panel (usually 1-2 holes). Here is some additional information: 1. Generally, there are no hoses to guide the drainage at the lower part of the door panel, and rainwater directly flows through the rust-proof treated door panel for discharge. Due to the low position of the drainage holes, vehicles that frequently drive on muddy roads may find these holes easily clogged by mud, so owners should pay attention to regular checks. 2. Sometimes, the drainage holes may be blocked by rubber plugs, which should be promptly removed to allow accumulated water to drain and prevent door rust. The drainage holes are usually positioned at the lowest part of the door, allowing water to naturally flow out due to gravity. Additionally, after washing the car, it is important to check the drainage holes at the bottom of the door to ensure they are not blocked by debris, and to clean them in time to prevent rust caused by water accumulation.
12
4
Share

Why is the metal box connected to the exhaust pipe dripping water?

The reason for water dripping from the metal box connected to the exhaust pipe: After gasoline is completely burned, it produces water and carbon dioxide. At high temperatures, water exists as water vapor, which is colorless and transparent. However, when the temperature drops below 100 degrees Celsius, the water vapor condenses into water. If the condensed water droplets are suspended in the air, they appear as white gas. When the ambient temperature is low, the white smoke from the exhaust pipe is water vapor. If the condensed water droplets accumulate, they turn into water. The exhaust pipe is equipped with a device to reduce vibration and noise, facilitate installation, and prolong the life of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, making the entire exhaust system flexibly connected.
6
1
Share

How to Distinguish Between the Reiz Big V and Small V?

Distinguishing between the Reiz Big V and Small V can be done by checking the engine displacement: the Big V has a 3.0L displacement, while the Small V has a 2.5L displacement. The Reiz is the domestic name for the Japanese Toyota MARKX model, which features a long wheelbase, shortened front and rear overhangs, and wider wheel tracks to accommodate larger tires positioned as close to the four corners of the body as possible. The vehicle height is reduced by lowering the seating position for occupants. The Reiz's lighting is distinctive, with front headlights featuring a three-beam pea-pod shape, and fog lights, low beams, and high beams arranged in a row. The overall size is not large, and the tail lights appear particularly striking with their transparent covers, exuding a sporty vibe.
10
2
Share

What is the reason for the P0012 camshaft position A timing retardation?

p0012 camshaft timing retardation reasons are as follows: 1. Low octane rating: Low gasoline octane rating or engine disengagement causes engine misalignment, resulting in camshaft retardation and altering the position sensor signal data. 2. Stuck: Oil pressure control valve (OCV) stuck. CVVT actuator gear mechanically jammed. 3. Wear: Oil pump wear, oil pump pressure regulating valve stuck, or system blockage. 4. Belt issue: Incorrect timing belt or chain alignment. 5. Wiring problem: Abnormal current in CVVT control circuit, poor contact in solenoid valve relay contacts and wiring harness, and poor ECM loop control.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.