Where is the air filter of Nissan Bluebird located?

What is not included in the stopping sight distance?

Stopping sight distance does not include the starting distance. Relevant information is as follows: 1. Definition: Stopping sight distance refers to the shortest driving distance required for a vehicle to stop when encountering an obstacle ahead on the same lane. The stopping sight distance can be broken down into three parts for study: reaction distance, braking distance, and safety distance. 2. The stopping sight distance consists of three parts: the distance S1 traveled during the driver's reaction time, the distance S2 traveled from the start of braking until the vehicle comes to a complete stop (braking distance), plus the safety distance S (5~10m). The minimum safety distance that should be maintained between the vehicle and the obstacle after the vehicle has completely stopped. It is generally 5~10m. Due to its small value, it is already considered in the reaction distance during calculation and is not separately accounted for.

18

3

Share

Why Hasn't the Traffic Violation Been Cleared Online After Processing?

Why Hasn't the Traffic Violation Been Cleared Online After Processing? The reasons are as follows: 1. Violation: There may be other unpaid traffic fines on the driver's license, or payment has been made but the information hasn't been updated in time due to delays in network data transmission. 2. Data Update: After the violator pays the fine, the bank system needs to submit the payment data to the traffic police department, which then uploads this data to the website for updates. Only after this process is completed and published can the payment result be seen online. 3. Time Lag: There is a time difference between the payment of the fine and the data being updated online. During this period, the website may still display the fine as unpaid.

4

5

Share

Does Shifting Gears with the Engine Off Damage the Car?

Shifting gears without pressing the clutch when the engine is off does not have any impact on the car. Here are the specific details: 1. Correct Gear Shifting: Turn on the power, press the brake, and shift gears—not directly into D gear, but first into N gear before starting the engine, then shift from N to D gear, release the handbrake, lift the foot brake, and start. This avoids the brief reverse impact on the transmission when moving from P gear through R gear after starting the engine. 2. Gear Shifting for Short Stops: Use the handbrake and shift into N gear, not P gear, and definitely do not keep the gear in D for an extended period (more than 30 seconds) while pressing the brake. The P gear has a locking mechanism; shifting into P without engaging the handbrake can cause wear on the mechanism. Keeping the gear in D while the vehicle is stationary will wear out the transmission.

18

4

Share

Does overfilling the gear oil in a scooter have any impact?

Overfilling the gear oil in a scooter does have an impact. Excessive gear oil increases the operational resistance of the gears, leading to higher fuel consumption. It also causes the transmission temperature to rise excessively, making the gear oil more prone to deterioration. As the temperature of the gear oil increases, the pressure inside the transmission also rises, which can result in oil leaks (at joints, axle seals, etc.). Relevant information is as follows: 1. Function: Gear oil primarily refers to the lubricant used in transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance. Gear oil mainly serves to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation. 2. Application: Automotive gear oil is used in gear transmission mechanisms such as steering gears, transmissions, and drive axles. Due to the high surface pressure during gear operation, gear oil plays a crucial role in lubrication, wear resistance, cooling, heat dissipation, rust prevention, cleaning, and reducing gear surface impact and noise.

9

0

Share

Is the X1 transmission made by ZF?

Aisin is the transmission brand for the X1. Founded in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the world's highest market share. The X1 uses an 8-speed automatic manual transmission, also known as an 8AT transmission. The AT transmission is a relatively common automatic transmission, with a complex structure that includes many planetary gears and clutch plates inside. The 8-speed automatic manual transmission features only five shifting components across four gear sets, with only two components engaged during each shift. Additionally, the new axial-parallel sliding vane pump improves transmission efficiency, minimizing energy loss. For the X1's transmission in daily use, the following points should be noted: Do not delay transmission fluid changes for extended periods. Although many modern vehicles feature maintenance-free transmission fluid, "maintenance-free" does not mean it never needs replacement. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause overheating and create a noticeable impact when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers, aiming for "smooth" operation, shift into reverse gears before the vehicle has fully stopped, which can cause significant damage to the transmission gears and lead to gear grinding or other failures over time. Avoid frequent uphill climbs in Drive (D). On steep inclines, automatic transmission vehicles may overheat due to high load or shift prematurely, resulting in insufficient climbing power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move it onto the tow platform while in Neutral (N). Do not use tow ropes or similar methods to drag the vehicle directly.

8

2

Share

How Thick Should Jumper Cables Be for Cars? Can Ordinary Wires Be Used?

Automobile jumper cables have specific thickness requirements, measured in square millimeters. For general household cars, it is recommended to use copper cables with an outer diameter of 10mm or more. When jump-starting a car, it is essential to use dedicated jumper cables. If ordinary wires must be used as a substitute, ensure they are large-gauge pure copper national standard wires to avoid affecting the jump-starting effectiveness and prevent damage to both vehicles. The specific criteria for selecting jumper cables are as follows: Choose based on the car's displacement: Do not randomly select jumper cables, as improper use can easily damage the battery. The car's displacement determines the appropriate jumper cables, and one should not opt for low-quality cables just because they are cheaper. Choose based on the car battery's current: The higher the current, the thicker the jumper cables needed. Using thinner cables can easily lead to leakage, which not only damages the battery but also increases safety risks.

11

4

Share

Where is the air filter of Nissan Bluebird located?

What is not included in the stopping sight distance?

Why Hasn't the Traffic Violation Been Cleared Online After Processing?

Does Shifting Gears with the Engine Off Damage the Car?

Does overfilling the gear oil in a scooter have any impact?

Is the X1 transmission made by ZF?

How Thick Should Jumper Cables Be for Cars? Can Ordinary Wires Be Used?

What is the speed limit for a tow truck?

What is M100 oil?

What are the speed requirements for straight-line driving in an automatic transmission vehicle?

What is the fuel consumption of the Chevrolet Equinox?