···
Log in / Register

Where is the air filter of Fengon e1 located?

4 Answers
DelJayla
08/26/25 6:01am
Fengon e1 does not have an air filter. This is a pure electric vehicle without an engine or intake system, so there is no air filter. The Fengon e1's electric motor has a maximum power of 33 kW and a maximum torque of 125 N·m. It is a front-engine, front-wheel-drive vehicle that uses a ternary lithium battery. The dimensions of the Fengon e1 are 3699mm in length, 1579mm in width, and 1515mm in height, with a wheelbase of 2423mm. In terms of safety, the front suspension of the Fengon e1 uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. It is equipped with an ABS anti-lock braking system, tire pressure monitoring, and a seatbelt reminder.
Was this review help?
16
0
Share
CodyDella
09/08/25 8:40am
I'm a seasoned auto mechanic with decades of experience in the industry, having repaired countless vehicles. I'm very familiar with the location of the Fengguang E1's air filter—it's in the engine compartment near the front passenger side area. Open the hood, but don't rush to search blindly. On the right side of the engine compartment, there's a plastic box secured with several clips. Pry it open, and the filter is right inside. The filter's job is to clean the air, ensuring smooth operation of both the engine and the air conditioning. If left unchanged for too long, dust buildup can clog it, leading to poor air quality inside the car and increased fuel consumption. Replacing it is simple: buy a matching new filter, put on gloves, gently place it in, and secure the cover. I personally recommend checking it every six months, especially in areas with frequent rainy seasons, as humidity can easily lead to mold growth. Remember the location to avoid mistakes—saving time and money while ensuring driving safety.
Was this review help?
12
1
Share
Expand All
Parra
10/22/25 8:45am
Our family has been driving the Fengguang e1 for almost two years now, and it's been worry-free for commuting. I was a bit confused when looking for the air filter, but checking the manual confirmed it's in the left corner area of the engine bay. Once you pop the hood, you'll see a palm-sized plastic box amidst the messy pipes—just release the clips and you can pull the filter out. After replacing it with a new one, the air conditioning blows much fresher, especially on summer highway drives without that musty smell. The replacement is super quick, and the original parts cost just over ten yuan online. I check it every 5,000 kilometers and replace it if it's dirty. A good filter condition makes the car run quieter and smoother, and maintenance isn't hard for our small family—definitely worth recommending.
Was this review help?
6
3
Share
Expand All
Beatrice
12/06/25 2:21am
As an environmentally conscious individual, I prioritize daily car maintenance. The Fengguang e1 air filter is located at the front left side of the engine compartment, in a fixed and easily identifiable position. After opening the hood, a quick glance near the engine reveals the filter hidden under a plastic cover. Cleaning and filtering the air is crucial for in-cabin health, and reducing dust can help lower exhaust pollution. I replace the filter frequently, approximately every 5,000 kilometers. The operation is straightforward: remove the old one, insert the new one, and snap the cover back on. This practice enhances energy efficiency, saving electricity and being eco-friendly. I recommend everyone develop the habit of regular maintenance—beneficial for both yourself and the planet.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

Which generation is the 2012 Camry?

The 2012 Camry is the seventh-generation model, which is the previous generation, with the latest model being the eighth generation. The Camry is a mid-size sedan under Toyota, and this car has good sales and reputation in China. The eighth-generation model has significant exterior changes, with a more youthful design. Here is some information about the Camry: 1. The Camry uses two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine has 178 horsepower, equipped with VVT-iE technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block. The 2.5-liter naturally aspirated engine has 209 horsepower, also equipped with VVT-iE technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block. 2. The Camry's front suspension uses a MacPherson independent suspension, and the rear suspension uses an E-type multi-link independent suspension. The E-type multi-link independent suspension improves the car's handling and ride comfort.
4
2
Share

Does the Great Wall Pao Off-Road Version Have a Diesel Model?

Great Wall Pao Off-Road Version does have a diesel model. The advantages of diesel vehicles are: 1. Long lifespan, economical and durable. Diesel engines operate at lower RPMs, leading to less wear and aging of related components compared to gasoline engines. With no ignition system and fewer auxiliary electrical components, diesel engines have a much lower failure rate than gasoline engines. 2. High torque at low speeds. Diesel engines can achieve high torque at very low RPMs, making them superior to gasoline engines on complex terrains, uphill climbs, and when carrying heavy loads. However, they are less performant in acceleration on flat roads like highways and high-speed driving. 3. Higher safety. Compared to gasoline, diesel is less volatile and has a higher ignition point, making it less likely to ignite or explode accidentally. Therefore, diesel is more stable and safer to use than gasoline. 4. More environmentally friendly. Diesel engines produce 45% less greenhouse gas emissions than gasoline engines, with lower emissions of carbon monoxide and hydrocarbons. However, over the vehicle's lifespan, nitrogen oxide and particulate matter (PM) emissions are higher than those of gasoline engines.
6
1
Share

How to Start a Ford Focus?

To start a Ford Focus, follow these steps: 1. Turn the key to the first position to power on, allowing the onboard computer to perform a self-check. 2. Press the brake pedal, turn the key from position 2 to position 3 to ignite the engine. Wait for the idle speed to drop to normal, and the temperature gauge needle to start moving. 3. Press the brake, shift to D gear, release the handbrake, and gently press the accelerator to start driving. Additional Information: 1. Design: The Ford Focus features a reinforced cage-type body structure design, utilizing high-strength steel plates to enhance body rigidity. Both front and rear impact zones and door anti-collision beams adopt the same reinforced structure design. 2. Performance: The Ford Focus is equipped with a fully independent rear suspension system, maximizing tire contact with the ground for smooth cornering performance.
17
2
Share

How to Open the Fuel Tank of a BMW 3 Series?

The BMW 3 Series fuel tank uses a touch-sensitive switch and requires manual sensing to open. Simply press the fuel tank cover to open it. If the fuel tank cover is damaged, there is a backup fuel tank switch in the trunk of the car. You can remove the trunk cover to access and open the fuel tank cover. Additional Information: 1. Wheelbase: The BMW 3 Series long-wheelbase version boasts the longest wheelbase in its class at 2,961 mm and offers China-exclusive comfortable seats for both front and rear passengers. 2. Performance: Equipped with the latest iDrive 7.0 system, the traditional handbrake has been replaced by an electronic parking brake. 3. Configuration: Features a new 12.3-inch programmable full LCD instrument panel, a 10.25-inch touch-sensitive central control display, and a full-color head-up display system that allows for three-screen connectivity.
16
2
Share

How to Turn on the Fog Lights of Tiggo 3?

The fog light switch of Tiggo 3 is located on the left stalk near the steering wheel. Press the switch to turn them on. Below is some relevant information about fog lights: 1. Fog lights help other vehicles see your car in conditions of reduced visibility, such as fog or heavy rain, so the light source needs to have strong penetration. 2. Most vehicles use halogen fog lights, with LED fog lights being a more advanced option. The steps to remove fog lights are as follows: 1. Use a flat-head screwdriver to gently pry the fog light grille from the back, releasing the clips inside. Once the front gap is widened, carefully pry the clips securing the grille to the front bumper. Remove the grille slowly to avoid breaking the plastic clips. 2. The fog lights are fixed to the front bumper with two screws. Use a Torx wrench to remove these screws and keep them safe for reinstallation. 3. After removing the screws, the fog light is held in place by two tabs inserted into the bumper's holes. Gently pull upward from the side where the screws were removed to detach the fog light.
11
4
Share

How to Replace Coolant in Magotan?

Here is the method for replacing coolant in Magotan: 1. Unscrew the radiator cap, open the drain valve, and drain the coolant. 2. Add coolant from the radiator filler port until it reaches the "Max" mark. 3. Tighten the radiator cap and reservoir cap. 4. Start the engine and let it idle. The coolant level will drop, so add more coolant until it reaches the "Max" mark again. The replacement steps and precautions are as follows: 1. After draining the coolant, tighten the drain switches on the cylinder block and radiator. 2. Fill the radiator with the specified coolant from the filler port until the coolant level in the reservoir reaches the "FULL" mark. 3. Then, close the radiator cap and let the engine run until it reaches normal operating temperature. Turn off the engine and let it cool to room temperature. 4. Check the coolant level in the reservoir again and add more if necessary. Ensure there are no air bubbles in the reservoir when the engine is idling.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.