Where is the air filter located in the Venucia T70?

2 Answers
LondynRose
07/29/25 6:03am
The cabin air filter is located beneath the dashboard, specifically on the lower left side of the front passenger seat. If you need to replace the cabin air filter, here are the steps to do so: 1. Enter the front passenger seat of the vehicle and locate the decorative panel on the lower side. Pry open the panel along its edges; 2. Once pried open, you can directly remove the decorative panel; 3. Then open the cabin air filter cover inside and pull out the old filter; 4. Finally, install the new cabin air filter. Precautions: 1. Be patient during the replacement process; 2. Ensure the new filter is of the same model as the original.
Was this review help?
17
2
Share
MiaRose
08/12/25 9:33am
The air filter for the Venucia T70 is located inside the glove box on the passenger side. You'll need to open the glove box to access it. Many people don't know how to find it at first, but it's actually quite simple: First, fully open the glove box. There might be a few clips or screws securing it—just unscrew or remove them. Behind the cover, you'll see a rectangular slot where the air filter is placed. The air filter is essentially an air purifier that filters out dust and impurities. If left unchanged for too long, it can get clogged, affecting cooling efficiency and potentially causing unpleasant odors inside the car. I recommend checking it every 10,000 kilometers or so—if it's too dusty, replace it. The design is quite user-friendly, as its location in the glove box makes it easy to replace yourself without needing to visit a repair shop and spend unnecessary money. Just make sure to align the model and direction when installing the new filter, and don't put it in backward.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

What are the penalties for driving on the highway immediately after obtaining a driver's license?

Here are the penalties for driving on the highway immediately after obtaining a driver's license: 1. A novice driving alone on the highway will be fined 200 yuan. If a driver operates a motor vehicle on the highway during the probationary period, they must be accompanied by a driver who has held a driver's license for the corresponding or a higher vehicle class for more than three years. The accompanying driver should sit in the front passenger seat to guide the probationary driver. 2. Failing to display the "probationary sign" will result in a fine of 200 yuan. When driving a motor vehicle during the probationary period, a uniform probationary sign must be affixed or hung at the rear of the vehicle. 3. Accumulating 12 demerit points during the probationary period will lead to the revocation of the driver's license. If a motor vehicle driver accumulates 12 demerit points during the probationary period, the driving qualification for the probationary vehicle class will be revoked. Additional information: The first 12 months after a motor vehicle driver initially applies for a driver's license or adds a new vehicle class is considered the probationary period. If the probationary period is extended, it will last for 24 months from the "initial license issuance date."
14
2
Share

Can Modified Brakes Pass Annual Inspection?

Modified brakes can undergo annual inspection, but if not reported to the vehicle management office in advance, they will not pass. If reported in advance, they can pass the inspection. In fact, any modified parts can undergo annual inspection—it just depends on whether they meet the requirements. The most crucial point is that the vehicle must match the description on the vehicle license. Below is more information about vehicle annual inspection: 1. Required documents for annual inspection include the vehicle license, compulsory traffic accident liability insurance policy (the copy will be retained), the inspector's ID card, a triangular warning sign, and a fire extinguisher. 2. Vehicles exempt from inspection within six years can complete the process online without queuing at the vehicle management office. 3. After verifying the compulsory insurance through the internet traffic safety service platform, you can directly apply for the inspection-exempt label online without visiting the vehicle management office or endorsing the vehicle license, achieving online application and mail delivery.
17
4
Share

What is the material of the three-way catalytic converter?

The material of the three-way catalytic converter is aluminum oxide (Al₂O₃), and the outer shell is made of stainless steel. The following are the reasons that cause the failure of the three-way catalytic converter: 1. Prolonged idling; 2. Delayed ignition timing; 3. Overly rich air-fuel mixture; 4. Engine oil burning; 5. Oxygen sensor failure; 6. Overheating due to incomplete cooling; 7. Switching off the vehicle while driving. Additional information: The working principle is that when high-temperature exhaust gases pass through the purification device, the catalyst in the three-way catalytic converter enhances the activity of CO, HC, and NOx gases, facilitating certain oxidation-reduction chemical reactions to convert them into harmless gases.
10
5
Share

Can I Buy Insurance for a Car That Has Been Uninsured for 2 Years?

You cannot buy insurance for a car that has been uninsured for 2 years. Vehicle Insurance: Vehicle insurance, also known as motor vehicle insurance or auto insurance, refers to a type of commercial insurance that covers liability for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Additional Information: Auto insurance is a form of property insurance. Within the field of property insurance, auto insurance is a relatively young category, as it emerged and developed alongside the advent and widespread use of automobiles. Unlike modern motor vehicle insurance, early auto insurance primarily focused on third-party liability coverage and gradually expanded to include risks such as collision damage to the vehicle body.
11
0
Share

What is the reason for hitting the right corner when reversing into the garage?

Hitting the right corner when reversing into the garage is caused by turning the steering wheel too early. In this situation, simply adjust by turning the steering wheel to the right, following the principle of "turning towards the wider side." Tips for reversing into the garage: Adjust the seat: Since everyone's height is different, the first thing to do after getting into the car is to adjust the seat to a position suitable for your height. This makes driving more comfortable and ensures that your legs are perpendicular to the car's dashboard, with your hands resting comfortably on top of the dashboard. Control the speed: When reversing into the garage, if you are not very familiar with the process, you can slow down the speed to allow more time for reaction and adjustment. Most importantly, avoid stalling the car. Adjust the mirrors: Whether you are a beginner or an experienced driver, observing the mirrors is essential for reversing into the garage. During exams, you also rely on the mirrors for this maneuver. Therefore, after getting into the car, adjust the mirrors to the best angle for you, making the reversing process much easier.
17
3
Share

Do I Need to Retake the Road Test if I Fail the Theory Part of Subject Three?

Failing the theory part of Subject Three does not require retaking the road test. After the implementation of the "Ministry of Public Security Order No. 139 of the People's Republic of China," the Subject Three examination was divided into two parts: the road test and an additional safety and civilization knowledge test, commonly referred to as "Subject Four," which assesses "driving ethics." Since this test is conducted after Subject Three, it is colloquially known as the Subject Four exam. Therefore, failing Subject Four does not affect the road test of Subject Three. You can simply reschedule the Subject Four exam. Introduction to Subject Three: The road driving skills test for Subject Three generally includes: preparation before getting on the car, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, pulling over, passing through intersections straight, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting other vehicles, overtaking, making U-turns, and night driving. Introduction to Subject Four: Also known as the Subject Four theory test or driver theory test, it is part of the motor vehicle driver's license assessment. The safety and civilization driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.