···
Log in / Register

Where is the Air Filter Located in the Trumpchi GS8?

3 Answers
JanelleDella
09/06/25 2:14am
The air filter of the Trumpchi GS8 is located inside the glove compartment in front of the passenger seat. The replacement steps are as follows: 1. Open the glove compartment in front of the passenger seat and remove all items inside; 2. Remove the three plastic clips on the lower panel of the glove compartment; 3. After removing the plastic clips, take off the plastic panel of the glove compartment; 4. After removing the plastic panel, unscrew the screws inside; 5. After removing the screws, pull the decorative strip above the glove compartment outward and unscrew the screws inside the strip; 6. Remove the screws near the passenger door on the side of the glove compartment; 7. Take off the glove compartment to reveal the air filter box; 8. Press the plastic clip on the air filter box and remove the box; 9. Replace the old air filter with a new one, then reassemble the glove compartment by reversing the disassembly steps. This completes the entire process of replacing the air filter in the Trumpchi GS8. The Trumpchi GS8 is a large seven-seat premium SUV launched by GAC Group's independent brand, GAC Trumpchi.
Was this review help?
7
1
Share
DiGabrielle
09/18/25 2:21am
I used to change the air filter for my Trumpchi GS8 by myself frequently. It's hidden behind the glove box on the passenger side. You need to open the glove box first, take out the items inside, then gently push it from both sides to release the clips. After that, you'll see a plastic cover, and the filter is inside. The cabin air filter is quite important, so it's recommended to check it every spring or every 10,000-20,000 kilometers. When it gets too dusty, the air quality in the car deteriorates, and you might notice unpleasant odors when using the AC, which can affect health. If it's too dirty, just replace it with a new one. You can buy the correct model online, and it only takes about five minutes to do it yourself, saving you a trip to the shop. Remember to wear gloves to keep your hands clean. I suggest using a PM2.5-proof filter to protect your family's respiratory health.
Was this review help?
8
4
Share
Expand All
StCamila
11/01/25 2:48am
During my time driving the GAC GS8, the cabin air filter has always been located behind the glove compartment on the passenger side. Replacing it isn't too difficult - first remove the screws and clips securing the glove box (avoid forcing it to prevent damaging plastic parts), then remove the cover to access the filter. This filter needs frequent replacement, especially during summer when AC usage increases, as dust buildup can reduce airflow or cause odors. I typically change mine twice a year, opting for reputable aftermarket brands to improve cabin air quality. Just keep a small screwdriver and new filter handy - the whole process is quick and takes minimal time.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What are the types of shock absorbers?

Shock absorbers can be categorized from a material perspective into two main types: hydraulic and pneumatic, with another type being variable damping shock absorbers. Structurally, they are divided into monotube and twin-tube types. Function of shock absorbers: Shock absorbers are used to suppress the oscillation of springs after absorbing shocks and the impacts from the road surface. They are widely used in automobiles to accelerate the attenuation of vibrations in the frame and body, thereby improving the ride comfort of the vehicle. When driving over uneven surfaces, although the shock-absorbing springs can filter out road vibrations, the springs themselves still undergo reciprocating motion. The shock absorber is designed to suppress this spring oscillation. Replacement of shock absorbers: Each vehicle has four shock absorbers: front left, front right, rear left, and rear right. If shock absorbers need to be replaced, it is best to replace two at a time. If there is an issue with either the front or rear shock absorbers, both the front or rear pair should be replaced simultaneously to avoid uneven balance and force distribution on the vehicle, which could lead to different stress levels on the shock absorbers and subsequent problems.
10
2
Share

What engine does the Roewe ei6 use?

Roewe ei6 uses a 1.5T turbocharged engine with a maximum power of 124 kilowatts and a maximum torque of 250 Newton meters. The maximum power speed is 5300 revolutions per minute, and the maximum torque speed is 4300 revolutions per minute. The cylinder head and cylinder block of this engine are made of aluminum alloy, and the fuel supply method is multi-point electronic injection. The Roewe ei6 is a car under SAIC Roewe, with a length, width, and height of 4671mm, 1835mm, and 1460mm respectively, and a wheelbase of 2715mm. The car is equipped with an internet car intelligent system jointly developed by SAIC Group and Alibaba, which also provides services and functions such as charging pile query, intelligent personalized navigation, remote car control, and voice control.
4
1
Share

What are the precautions for driving in snowy conditions?

Precautions for driving in snowy conditions are as follows: Maintaining steady and low-speed driving is essential: Since the braking distance increases with speed, controlling your speed and maintaining a larger safe distance from the vehicle ahead are crucial when driving on icy or snowy roads. Keeping a steady straight-line driving is necessary: It's best to maintain a steady straight-line motion while driving. Turn the steering wheel slowly, and apply the throttle and brakes gently. Avoid sudden or excessive movements. Avoid sharp steering on icy surfaces: When you need to change direction while driving, first reduce your speed, then increase the turning radius and steer slowly. Hold the steering wheel with both hands and operate smoothly and gently to prevent skidding. Drive decisively on slopes: If you must drive on a snow-covered slope, keep in mind that snow and ice significantly reduce vehicle traction. Therefore, maintaining a certain speed is even more important when going uphill.
9
3
Share

Will the car battery low power warning light come on?

Car battery low power warning light will not come on. If the engine warning light is on, it should be due to a historical fault code. It is recommended to go to a 4S store or auto repair shop to use a decoder to directly clear this fault code, after which the engine warning light will no longer illuminate. Below are the reasons for battery low power: Reason: The electrolyte (dilute sulfuric acid) in the original SUBARU car battery will gradually evaporate when the battery temperature rises, especially in summer. Unscrew the four sealing plugs on the battery to check, there are anti-splash vent holes designed to release the steam generated inside the battery due to temperature increase. As the electrolyte decreases, the battery's power storage capacity will gradually decline. In late autumn and winter, especially during cold starts after prolonged parking or when driving at low speeds, the battery may not charge sufficiently or may even discharge unidirectionally. At this time, the battery temperature is very low, and the electrode discharge reaction is not active, leading to obvious low power or even complete depletion of the battery's stored energy.
19
0
Share

Is jump-starting effective when the car battery is dead?

Jump-starting is effective when the car battery is dead. After connecting the cables, start the vehicle with a charged battery to provide reliable voltage to the dead battery. Revving the engine can speed up the charging process. Below are the steps for jump-starting: Method: Retrieve your own jumper cables or borrow them from another vehicle, ensuring you have one positive and one negative cable. In addition to the cables, you'll need a vehicle with a functioning battery. Typically, the car battery is located on the right side of the engine compartment. Remove the battery box clips to open the battery cover, exposing the positive and negative terminals. Whether it's the rescue vehicle or the vehicle being rescued, all battery operations should be performed with the engine off. Always confirm the positive and negative terminals of the battery. If you cannot distinguish the battery's positive and negative terminals, avoid jump-starting randomly. Take one jumper cable and connect one end to the positive terminal of the dead battery and the other end to the positive terminal of the charged battery. Ensure the positive and negative terminals do not come into contact to avoid the risk of a short circuit. Take another jumper cable, first connect it to the negative terminal of the charged battery, then connect the other end to the engine block or body of the dead vehicle. Never connect negative to negative.
7
4
Share

How long after a motor vehicle fails its inspection will a fine be imposed?

Motor vehicles will be fined if they fail their inspection for more than 90 days. Penalties for failing inspection within 3 months: If a car fails its inspection for less than 3 months, there will be no penalty as long as it undergoes the annual inspection at the testing station on time. The traffic management department of the public security authority will only issue a verbal warning. Failing inspection for more than 3 months but less than 2 years: If a car fails its inspection for more than 3 months but less than 2 years, a fine must be paid, and 3 points will be deducted from the driver's license. Failing inspection for more than 2 years: If a car has not undergone an annual inspection for more than 2 years, its vehicle record will be canceled. Generally, the record can only be restored after paying a fine. Precautions for failing inspection: A car that has failed its inspection cannot be driven directly to the inspection site. Driving without undergoing the annual inspection on time is considered illegal and may result in the vehicle being impounded.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.