Where is the air filter located in the Sylphy?

2 Answers
RoseDella
07/24/25 6:25am
The air filter is located on the right side of the engine compartment, connected to the prominent large intake pipe. Here are the steps to remove the Sylphy's air filter: 1. Locate the hood release under the driver's seat, open the hood, and find the air filter box. 2. Open the cover to reveal the air filter. 3. Remove the filter and check its condition based on dirt accumulation and structural damage to determine if replacement is needed. 4. If the filter is relatively clean, it can be reused after tapping or blowing with an air gun. Since the filter is a consumable item, it loses effectiveness when too dirty and should be replaced in such cases.
Was this review help?
2
0
Share
VonAaliyah
08/11/25 2:10am
I've been driving a Sylphy for several years. The air filter is located in the upper left corner of the engine compartment, usually in a black rectangular box. You can see this box after opening the hood. There's a clip near the windshield side - just push it gently to open. I changed the filter myself last year and found it quite simple. If you don't replace the filter for a long time, the engine noise will increase and fuel consumption will be slightly higher. I recommend checking it every 10,000 kilometers. Before starting, it's best to clean the surrounding dust to prevent debris from falling into the box and affecting performance.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

What is the function of a car's three-way catalytic converter?

The function of a car's three-way catalytic converter is to purify exhaust gases. Here are the relevant details: 1. Function: It promotes specific oxidation-reduction chemical reactions, where CO is oxidized into colorless, non-toxic carbon dioxide gas at high temperatures; HC compounds are oxidized into water and carbon dioxide; and NOx is reduced into nitrogen and oxygen. These three harmful gases are converted into harmless gases, thereby purifying the vehicle's exhaust. 2. Features: The three-way catalytic converter has stable performance, reliable quality, and a long lifespan, making it widely applicable. The core component of the three-way catalytic converter is a porous ceramic material installed in a specially designed exhaust pipe. It is called a 'carrier' because it does not participate in the catalytic reaction itself but is coated with precious metals such as platinum, rhodium, and palladium.
18
4
Share

What Causes a Dash Cam to Fail to Read the Memory Card?

If a dash cam consistently fails to read the memory card, it is likely due to memory card incompatibility. Below are the steps for using a dash cam: 1. Insert the memory card: Insert the memory card while the dash cam is turned off, then restart the device. 2. Install the app: Download the app on your smartphone by scanning the QR code provided by the seller or following the software name indicated in the user manual. 3. Connect via password: Before opening the app, go to the WiFi settings on your phone and select the dash cam's WiFi network (the WiFi name is usually specified in the manual and typically appears at the top of the WiFi list). Enter the password to connect (common default passwords include 12345678, 1234567890, 888888, or 8888888). Once inside the app, you can change the WiFi password—proceed with caution. 4. Successful connection: Once connected, you can use your phone to perform real-time functions such as recording, taking photos, playback, downloading, sharing, and system settings. This method is compatible with all Android and iOS devices.
18
3
Share

Do both sides of the Corolla brake lights illuminate?

Both sides of the Corolla brake lights illuminate. Brake lights are generally installed at the rear of the vehicle, with the main body color being red, to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the front vehicle is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. Below is the classification of automotive lights: 1. Headlights: Combined headlights are located at the front of the car, primarily serving the purpose of illumination and signaling. The light emitted by headlights illuminates the road ahead, allowing the driver to drive safely at night. 2. Combined taillights: Combined taillights are located at the rear of the car, mainly serving the purpose of illumination and signaling. 3. Turn signals: These are used to indicate left or right turns to other road users and are required by regulations to be amber in color. 4. License plate lights: License plate lights primarily illuminate the license plate, enabling people to identify the vehicle's license plate in the dark.
9
4
Share

How is an empty fuel tank indicated in a car?

The indicator for an empty fuel tank is the illumination of the fuel warning light. Relevant details: 1. Reason for fuel light illumination: The fuel level is controlled by a float sensor inside the fuel tank. After monitoring the fuel level, the sensor sends this signal to the ECU, which then comprehensively analyzes and relays it to the dashboard. If the fuel level is too low, the fuel warning light will illuminate. 2. Factors affecting fuel light illumination: Fuel level position. The float sensor transmits this information through simple liquid level position determination, which can be said to be somewhat related to the shape of the fuel tank, though this aspect doesn't vary significantly across different car models. Recent average fuel consumption. This is primarily a criterion considered by the ECU. If driving in the city with frequent stops and starts, leading to higher average fuel consumption, the warning light will illuminate earlier. Conversely, during highway driving with lower average fuel consumption, the light will illuminate later. This is a relatively user-friendly design, though some vehicles may not be equipped with this feature.
20
0
Share

Does the Haval F5 still come with a manual transmission?

As a model targeting the young and fashionable consumer group, the Haval F5 has significant differences in exterior design compared to its H-series counterparts. It adopts a design language similar to WEY, with a styling more inclined towards a sporty coupe SUV. The Haval F5 is available with both manual and automatic transmissions, allowing consumers to choose the model that suits their preferences. Below is more related information: 1. Exterior: As a model targeting the young and fashionable consumer group, the Haval F5 has significant differences in exterior design compared to its H-series counterparts. It adopts a design language similar to WEY, with a styling more inclined towards a sporty coupe SUV. The official claim is that the F series and H series do not differ in positioning; instead, they target different markets through distinct exterior and interior design styles. The most eye-catching feature of the front fascia is the mesh-style large grille, reminiscent of the WEY-P8 model. On either side of the grille are a pair of willow-leaf-shaped headlight clusters, with round fog lights on both sides accented by L-shaped chrome trim. The front bumper features a full and fashionable design with three trapezoidal slots on the lower front spoiler, presenting a dynamic and imposing appearance. 2. Body Dimensions: In terms of body dimensions, the F5 measures 4470mm in length, 1857mm in width, and 1638mm in height, with a wheelbase of 2680mm. The wheelbase is the same as that of the H6, while the compact body size places it between the H4 and H6, with a lower height than both, giving it a more sporty feel. The rear design is simple, featuring traditional split taillights. The rear bumper details correspond to the front bumper, equipped with a black lower lip and also featuring three trapezoidal slots. The overall rear design emphasizes fullness, harmoniously matching the front fascia. 3. Powertrain: For the powertrain, the initial four models are equipped with a 1.5T turbocharged engine, with the official announcement that a 2.0T engine will be introduced later. The current 1.5T turbocharged engine delivers a maximum power of 124kW (169PS) and a maximum torque of 285N·m. The transmission paired with the 1.5T engine is a 7-speed dual-clutch transmission independently developed by Great Wall. As the first model in the F series, the F5 retains Haval's practical and reliable advantages while also featuring an exterior design that better meets the needs of young consumers.
2
0
Share

What is the SERES car brand?

SERES is a brand under Chongqing Jinkang SERES Automobile Co., Ltd., which is affiliated with Chongqing Sokon Industrial Group Co., Ltd. In the field of new energy electric vehicles, Jinkang SERES obtained the production qualification from the National Development and Reform Commission in January 2017 and the product qualification from the Ministry of Industry and Information Technology in September 2018, possessing both production and sales qualifications. Jinkang SERES has established a dual layout for new energy electric vehicle manufacturing in both China and the United States, exploring new automotive manufacturing models. Driven by digitalization as the core, it integrates new technologies such as artificial intelligence, the Internet of Things, and cloud computing to truly meet user demands with real-time online responsiveness. SERES models include the SERES SF5, SERES iX3, and SERES SF7. Among them, the SERES SF5 is an extended-range electric mid-size SUV with dimensions of 4700mm in length, 1930mm in width, and 1625mm in height, and a wheelbase of 2875mm. The SERES SF5 is equipped with a 1.5-liter turbocharged engine with a maximum power output of 82kW.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.